Got my sight, it looks awesome but I started doing the sight in and I bottom out the sight still not hitting 20 yards is hitting about 4 inches low and I'm shooting about 297fps so is not slow
Dialed support contacted me the lowest it could go is to the 2nd axis print and still can't hit the 20 yard by 3 inches so I'm gonna have to use the dialed wheel to get the 20. I have the hha tetra and is all the way down to hit the 20 but I xan clear easy to 125 yards without my vanes hitting the sight.
Great vid Joe, this may be a dumb question, but I just ordered my first pruf coming from a small trophy ridge fixed. so I know you got 20,36,48 if I wanted to shoot right at 40 can I slide the top pin/indicator to right at 40? Or are you stuck with what you got?
@@Garett.Nguyen I sighted in so my top was 20. If you have the 3v option the bottom two will end up at random yardages since you can move those pins. You’ll just have to shoot and see where they end up at. Once you figure that out you can move the other indicators to that yardage. For me the top was 20, middle 36, and bottom 48. I moved the indicators to each of those yardages. Then when you slide the sight you can use any of those indicators as where the pin will be. If you like the top pin the best for your sliding pin you can slide it to whatever yardage. If you want to hit at 40 you just slide that pin indicator right to 40 and you should be right on. If you have the 3 h or h housing you can move those pins so you could sight in for exactly 20, 30, and 40 or whatever you like. Hopefully that makes sense.
@@thehiddenoutdoors6535 thank you so much for the explanation man! I got the 3H mags, so those can actually move to the desired 20,30,40 after sighting in?
@@sethgayman31 Hey Seth, it’s made out of foam flooring mats. Its held up pretty well. I have only shot field points and mechanical practice tips into it though. So far I haven’t had any issues with arrows blowing through it or it falling apart. Only about a year old though. I’ll post a video on it here soon.
Do the second and third pin move? So if you wanted to, you could have them at 20,30,40 and use your first pin as your slider? I don't understand why you would want your 2nd and 3rd pins to be at wonky yardages. Just curious.
@@HUNTFISHTIMP they are set so you can’t move them. I wish they would move. Since they don’t move your set to whatever yardage they are. That’s why it ended up at 20, 36, and 48.
I noticed there weren’t a lot around me until scheels started carrying them. I think with this one they will become more popular and hopefully get more dealers.
Thanks for this!
Hey Joe, very education video much appreciated your effort and explanatory of the setup, keep it up man
Thank You! I appreciate the positive feedback!
Great video I’m waiting for mine it will be deliver Thursday
You’ll have to comment back on your thoughts. I personally think it’s a great sight.
Got my sight, it looks awesome but I started doing the sight in and I bottom out the sight still not hitting 20 yards is hitting about 4 inches low and I'm shooting about 297fps so is not slow
@@IZZYR23 are you able to mount the sight lower on the riser of the bow?
No cause I have a mathews uses the bridge-lock
Dialed support contacted me the lowest it could go is to the 2nd axis print and still can't hit the 20 yard by 3 inches so I'm gonna have to use the dialed wheel to get the 20. I have the hha tetra and is all the way down to hit the 20 but I xan clear easy to 125 yards without my vanes hitting the sight.
Great vid Joe, this may be a dumb question, but I just ordered my first pruf coming from a small trophy ridge fixed. so I know you got 20,36,48 if I wanted to shoot right at 40 can I slide the top pin/indicator to right at 40? Or are you stuck with what you got?
@@Garett.Nguyen I sighted in so my top was 20. If you have the 3v option the bottom two will end up at random yardages since you can move those pins. You’ll just have to shoot and see where they end up at. Once you figure that out you can move the other indicators to that yardage. For me the top was 20, middle 36, and bottom 48. I moved the indicators to each of those yardages. Then when you slide the sight you can use any of those indicators as where the pin will be. If you like the top pin the best for your sliding pin you can slide it to whatever yardage. If you want to hit at 40 you just slide that pin indicator right to 40 and you should be right on. If you have the 3 h or h housing you can move those pins so you could sight in for exactly 20, 30, and 40 or whatever you like. Hopefully that makes sense.
@@thehiddenoutdoors6535 thank you so much for the explanation man! I got the 3H mags, so those can actually move to the desired 20,30,40 after sighting in?
@@Garett.Nguyen yeah you can sight in for 20, 30, and 40 since you can move each of the pins on that housing and then set indicators to 20,30,and 40.
@@thehiddenoutdoors6535 perfect man thank you so much. Your videos on all of this has helped me a ton! Can’t wait for mine to come in!
@@Garett.Nguyen I appreciate it! Thanks for watching and your support!
Hey Joe. What is that target made out of? Looking to make one just like that! And how’s it holding up!?
@@sethgayman31 Hey Seth, it’s made out of foam flooring mats. Its held up pretty well. I have only shot field points and mechanical practice tips into it though. So far I haven’t had any issues with arrows blowing through it or it falling apart. Only about a year old though. I’ll post a video on it here soon.
How many pieces did it take ya to get it that size??
@@sethgayman31 I’ll have to go back and check it was quite a few. It’s 4ft x4ft. I’ll post back once I find the number.
Do the second and third pin move? So if you wanted to, you could have them at 20,30,40 and use your first pin as your slider? I don't understand why you would want your 2nd and 3rd pins to be at wonky yardages. Just curious.
@@HUNTFISHTIMP they are set so you can’t move them. I wish they would move. Since they don’t move your set to whatever yardage they are. That’s why it ended up at 20, 36, and 48.
I got the same bow, thinking about making the switch to the Pruf. How is the peep alignment with the Pruf on yours?
I used a 3/16 peep. Could be just a little smaller peep but I’m a 26.5 draw length.
That will be the sight I shoot in 2025. Wish I had a local dealer here.
I noticed there weren’t a lot around me until scheels started carrying them. I think with this one they will become more popular and hopefully get more dealers.