Instead of over paying double or triple just go directly to china. I order a 12x23ft led wall, p1.8 and pretty much exactly the same design as this, it came out to right around $30k for the wall and shipping... Quotes I got were well into the 80-100k range. The support from china is top notch also so you're really not missing out on anything.
We need to normalize transparent pricing for things like this. Worship productions and Springtree are great in this regard. Their panels aren't the greatest, but at least the regular church tech guy can go to their website and get a starting price point in 30 seconds.
@@mikehines14as a relatively new tech director, this is a major problem. It’s incredibly difficult to find a general price point without a long consultation process. We were looking at Worship Productions, but I’ve heard that the panels aren’t amazing. Is there any manufacturer you would suggest that isn’t overly expensive but still good quality?
Good promo bro but you definitely rushed it out with less details needed from the Title itself. Please link where to get the vacuum for the panels, please share where to get and show build of the Ground Support . Show the config for the processor to get the data. I’m looking forward for more as you promised to put out more details on the altitude channel.
Cost for this size wall? There must be a per-panel cost plus the cost of mounting per foot and processor... Should be pretty easy to give pricing. The form you have to submit on the Altitude LED website only asks a few questions to quantify what is needed to get a cost.
Blows my mind to have such and expensive piece of tech held down by cheap white sandbags. It is very common in these installations, but it wouldn't take much to wrap them in some black fabric to make it a bit more professional looking. I'm also surprised it doesn't come shipped with plastic shells that you can fill with sand that would attach to the base. LIke say an outdoor umbrella base.
Playing devils advocate- are you really that concerned with how it looks behind the wall? If that's the case- should we also cover all those lights and cables on the back with curtains "just in case" someone sees it? I mean- personally I wouldn't use sand- every theatre should have stage weights for this. But I would then gaff the area with yellow so no one trips. The white is easy to see.
It's fine if it is a DIY set up, we all cut corners there, but this is professional build. If I spent all that money, I'd be pretty unimpressed by the sandbags. Then again maybe they ok'd that to save money. I didn't know about stage weights and honestly I like the yellow tape idea or even motion leds.
Do you route the signal from the 2nd Propresenter computer through the Atem Contstallation? If so I would switch the Constallation Outputs instead of loop the NDI Stream through Propresenter for mirroring because of the delay. The switching can be done with a Makro in Propresenter. We do this in our church with companion where we trigger the button with rosstalk.
*SCRATCHES HEAD* So, 5 months ago Jake does a sponsored post w/ THOR, "The Ultimate Guide to LED Walls for Churches" and then he introduces his own line/brand of video wall? How does that work? Is THOR your manufacturing partner? If not, did you return the sponsorship money to Thor and thank Barry and Stefan for showing you the way? Regardoing the Altitude "Industry-leading" 5-year warranty? How does your 5-year warranty stack up to to Planar and Absen's lifetime warranty? Blizzard has had a 7-year warranty for a few years now. Refresh LED offers a 3-year warranty with 24/7 live tech support. Very interesting...
No! I'm just a guy who messed up the post. I meant to post here and thought the comment was deleted. Feel free to remove the comment from the Altitude page. It should really go here. Sorry for the confusion! @@Churchfront
![เบิ้ล ปทุมราช - สาวสอง ( มีมี่ของอ้าย ) ft. ตาต้า,ต้องเต [OFFICIAL MV]](http://i.ytimg.com/vi/mqlMjnP08XI/mqdefault.jpg)
That vacuum gun for the LED wall panel is sick 👌🏻
Instead of over paying double or triple just go directly to china. I order a 12x23ft led wall, p1.8 and pretty much exactly the same design as this, it came out to right around $30k for the wall and shipping... Quotes I got were well into the 80-100k range. The support from china is top notch also so you're really not missing out on anything.
Bro what company in China did you use for this?
Same bro, could you please help with the info on who you went to? Thank you!
@@jonathanabrego5056 lol they are deleting my comments, which I understand.
@@FiresideCC dude he deleted my comments too because I recommended other companies
Would really like to know who you went through to get that good of a deal.
Wow! 2.9mm is just so much better than the regular 3.9mm you can see everywhere. 😊👌
Step one. Build a media fund for giving :D
RIP my ears when the vacuum tool turned on...
What was the price for this system?
That's what I was hoping to find out as well.
Atleast 100k
The tithes of 50,000 people. Such a waste. 😢
In my university we use resolume for the LED Wall and send lyrics through NDI from EasyWorship
Sick!
What is a general price point for an LED wall of this size and configuration from Altitude?
Very expensive
We need to normalize transparent pricing for things like this. Worship productions and Springtree are great in this regard. Their panels aren't the greatest, but at least the regular church tech guy can go to their website and get a starting price point in 30 seconds.
@@mikehines14as a relatively new tech director, this is a major problem. It’s incredibly difficult to find a general price point without a long consultation process. We were looking at Worship Productions, but I’ve heard that the panels aren’t amazing. Is there any manufacturer you would suggest that isn’t overly expensive but still good quality?
@@tannerblades9049direct to china! Check out my other comment
If you have to ask... 😁
Good promo bro but you definitely rushed it out with less details needed from the Title itself. Please link where to get the vacuum for the panels, please share where to get and show build of the Ground Support .
Show the config for the processor to get the data.
I’m looking forward for more as you promised to put out more details on the altitude channel.
Cost for this size wall? There must be a per-panel cost plus the cost of mounting per foot and processor... Should be pretty easy to give pricing. The form you have to submit on the Altitude LED website only asks a few questions to quantify what is needed to get a cost.
Blows my mind to have such and expensive piece of tech held down by cheap white sandbags. It is very common in these installations, but it wouldn't take much to wrap them in some black fabric to make it a bit more professional looking.
I'm also surprised it doesn't come shipped with plastic shells that you can fill with sand that would attach to the base. LIke say an outdoor umbrella base.
Playing devils advocate- are you really that concerned with how it looks behind the wall? If that's the case- should we also cover all those lights and cables on the back with curtains "just in case" someone sees it? I mean- personally I wouldn't use sand- every theatre should have stage weights for this. But I would then gaff the area with yellow so no one trips. The white is easy to see.
It's fine if it is a DIY set up, we all cut corners there, but this is professional build. If I spent all that money, I'd be pretty unimpressed by the sandbags. Then again maybe they ok'd that to save money.
I didn't know about stage weights and honestly I like the yellow tape idea or even motion leds.
Hi Dustin, I paid myself $0 in this install to put sandbags on our ground support.
Around 20K is enough to have such a system...
Do you route the signal from the 2nd Propresenter computer through the Atem Contstallation? If so I would switch the Constallation Outputs instead of loop the NDI Stream through Propresenter for mirroring because of the delay. The switching can be done with a Makro in Propresenter. We do this in our church with companion where we trigger the button with rosstalk.
Am always available for any one that need help on mapping there Led screen
What FAS system you are using? it is good to see NETAPP rack in your church :)
Add a power distro 😉
This coulb be used as a volume for film making and vfx
What is your distance from the wall standing?
How much?
*SCRATCHES HEAD* So, 5 months ago Jake does a sponsored post w/ THOR, "The Ultimate Guide to LED Walls for Churches" and then he introduces his own line/brand of video wall? How does that work? Is THOR your manufacturing partner? If not, did you return the sponsorship money to Thor and thank Barry and Stefan for showing you the way? Regardoing the Altitude "Industry-leading" 5-year warranty? How does your 5-year warranty stack up to to Planar and Absen's lifetime warranty? Blizzard has had a 7-year warranty for a few years now. Refresh LED offers a 3-year warranty with 24/7 live tech support. Very interesting...
This is literally the same comment left on a video on the altitude channel. Are you a bot?
No! I'm just a guy who messed up the post. I meant to post here and thought the comment was deleted. Feel free to remove the comment from the Altitude page. It should really go here. Sorry for the confusion! @@Churchfront
Okay follow up question. Do you have the details on hand for my agreement with Thor? Do you know the context for why we are launching Altitude?
You have a new fan in me
Churches need to be taxed......