ความคิดเห็น •

  • @4bfarmsllc262
    @4bfarmsllc262 2 ปีที่แล้ว

    New Holland bales can’t be beat.

    • @tedkahler9738
      @tedkahler9738 2 ปีที่แล้ว

      YES i really like the bales....

  • @wallyyuriy8912
    @wallyyuriy8912 2 ปีที่แล้ว +1

    1/2 mile at 30ft is almost 2 acres.
    6 bale an acre roughly

    • @tedkahler9738
      @tedkahler9738 2 ปีที่แล้ว +1

      Not to shabby right.... pry weigh 1500 pluss pounds too

  • @jimsullivan9710
    @jimsullivan9710 2 ปีที่แล้ว +2

    What bearing went out?

    • @tedkahler9738
      @tedkahler9738 2 ปีที่แล้ว +1

      main drive bearing on top next to the declutch for the belts

  • @jerrystott7780
    @jerrystott7780 2 ปีที่แล้ว +1

    Looks like about 15 seconds from when you start moving until you stop again between bales. Have a great day.

    • @tedkahler9738
      @tedkahler9738 2 ปีที่แล้ว +1

      yea... lots and lots of bales thanks for watching

  • @danielhurrle7008
    @danielhurrle7008 2 ปีที่แล้ว +1

    Would like to see some of the repairs on the videos. Happy Thanksgiving to you and your family Ted

    • @tedkahler9738
      @tedkahler9738 2 ปีที่แล้ว +1

      Thanks ill try to do some. Hope you have a great thanksgiving as well... its been over all a GREAT year

    • @danielhurrle7008
      @danielhurrle7008 2 ปีที่แล้ว

      @@tedkahler9738 with the lack of rain that's for sure. Have a great rest of harvest.

  • @dustinadams9136
    @dustinadams9136 2 ปีที่แล้ว +1

    Ted what brand of preservative do you use? Might as well show all the break downs too, show people that it’s not all just driving equipment lol.
    Hunter you did really good showing how that baler eats the windrows and what a nice tight bales look like. Keep up the videos guys 👍

    • @tedkahler9738
      @tedkahler9738 2 ปีที่แล้ว

      I run silo guard II or hay guard II thanks for stopping by

    • @dustinadams9136
      @dustinadams9136 2 ปีที่แล้ว

      @@tedkahler9738 thanks I’ll check them out, been wanting to add an applicator to my baler

  • @e.a.bfarms
    @e.a.bfarms 2 ปีที่แล้ว

    Give that camera man a raise! Haha. Glad to see the content back.

    • @tedkahler9738
      @tedkahler9738 2 ปีที่แล้ว

      I’ll have to double his wages hehe. Thanks

  • @larsonvalleyfarm
    @larsonvalleyfarm 2 ปีที่แล้ว

    Nice work recording Hunter... Pretty smooth recording, even while you where running!

    • @tedkahler9738
      @tedkahler9738 2 ปีที่แล้ว +1

      not to bad... better check out his channel!

    • @larsonvalleyfarm
      @larsonvalleyfarm 2 ปีที่แล้ว

      @@tedkahler9738 I did! And I subbed!

    • @tedkahler9738
      @tedkahler9738 2 ปีที่แล้ว +1

      He will appreciate it thanks

    • @jonstevensmaplegrovefarms3754
      @jonstevensmaplegrovefarms3754 2 ปีที่แล้ว

      @Ted Kahler you have a link?
      Be fun to do big windrows like that!
      Repair videos could be very interesting but hard to do if it's in the heat of the moment. The last thing I want to do is set up a camera.

    • @larsonvalleyfarm
      @larsonvalleyfarm 2 ปีที่แล้ว +1

      @@jonstevensmaplegrovefarms3754 I agree Jon! Unfortunately farming pays the bills, not making videos!

  • @69druth
    @69druth 2 ปีที่แล้ว

    Good video. Have many issues with that baler. I have a CIH 455 and have had something with it every year baling 700 bales a year. Lost density the first year. Bale size sensor the second year. Belt ripped this year. Thinking on sending it down the road. Had a 94 Hesston before baled years before had to do anything with it. May go with a 469 Deere that similar to the Hesston. Bought this one for rotor feed drop floor and soft core kit which Deere didn't have. Maybe just bugs I don't know. 45k should run for a few years anyway for what I doing.

    • @tedkahler9738
      @tedkahler9738 2 ปีที่แล้ว +1

      this one been pretty good except loosing the door.... i baled over 700 bales in the two days i baled cain this year neighbor use to run deeres but switched to new holland and been very happy...think this one is closing in on 10 k bales... guess this summer i caught a cord and that was fun to splice all the wires back together but wasnt a baler fault....seems any more the time a piece of equipment is parked is just as hard on them (or even harder) than the time in the field

    • @tedkahler9738
      @tedkahler9738 2 ปีที่แล้ว

      i have always ran endless belts and have never had a failure

    • @69druth
      @69druth 2 ปีที่แล้ว

      @@tedkahler9738 Thanks for your info. Mine is endless too. Deere guys here trading on Kuhns. I really like the bales on CHN they pack them in. Maybe I will try another year.

  • @toby0395
    @toby0395 2 ปีที่แล้ว

    How do you like the super sweep pickup head? I've heard some people despise them, say they have plugging problems, but then the next guy loves it

    • @tedkahler9738
      @tedkahler9738 2 ปีที่แล้ว +1

      this pickup is a huge improvement over the 7090 models... i would say i love it

    • @toby0395
      @toby0395 2 ปีที่แล้ว

      @@tedkahler9738 Never got to run one yet, I'm still running an old 664 and it still makes as good of bales as the day it rolled off the dealers lot, so until I win the lottery or something like that I guess I'll keep it lol.

  • @troyremmers6223
    @troyremmers6223 2 ปีที่แล้ว

    What about trying liquid protein

    • @tedkahler9738
      @tedkahler9738 2 ปีที่แล้ว

      not quite understaning your question.... we do use some in our tmr's

    • @troyremmers6223
      @troyremmers6223 2 ปีที่แล้ว

      Instead of preservite good a person put on liquid protein

    • @tedkahler9738
      @tedkahler9738 2 ปีที่แล้ว +1

      the preservative is to keep the hay from heating and getting spoiled and or getting moldy or even worse off would be if it combusts from the heating... i have never heard of using protein for that. all this feed will go into hay grinder... well most of it will anyhow

  • @silentHangus
    @silentHangus 2 ปีที่แล้ว

    Good work boys.. Glad to see you back making videos Ted. Plenty of repair videos out there, I'd say keep it about cows & crops. How's the bud box & load out? Would love to see drone footage of that. Also freeze branding.. I've switched from LN2 to dry ice. Much better results. Would like to hear your thoughts, are you guys still freeze branding? What's hunter's channel called?

    • @tedkahler9738
      @tedkahler9738 2 ปีที่แล้ว +4

      Love the bud box and load out... still making improvements and finishing the load out though... ill make a video about that we have also quit freeze branding just takes to much time ... it is nice when its done BUT im really thinking about just changing to eid tags. we used dry ice before and it was easier to be consistent but the liquid nitogen seemed to be so much faster we stuck with that when we were doing it a few tenths of a second makes a huge difference with the nitrogen. Hunters channel is called hunter kahler. ALSO thanks for watching i hope to keep the videos more consistent and once we get through this video dump.... hope to keep them more up to date

  • @Heimerviewfarm
    @Heimerviewfarm 2 ปีที่แล้ว

    I'd say make a video just showing something that isn't the same as every other video. Atleast that's what I tend to watch.