Husqvarna Trimmer Carburator Clean
ฝัง
- เผยแพร่เมื่อ 28 ก.ย. 2024
- This video shows the carb cleaning of a Husqvarna 225L Weed Trimmer. I don't do as many carb videos as I used to but this video shows me actually taking my time and going a bit slower. If there are any issues about how the diaphragm goes in here is a link to the Zama site. Thanks to jj parody for catching this
www.zamacarb.co...
Hey thanks man! I just got my weed eater running again by following your instructions. Awesome!
So cool!!!!
Just what I was looking for. Great video man, very informative.
+michael jarrod I am happy to help.
I love Husqvarna equipment!
Me too. I don't do that many 2 strokes any more just because of the pulling close to my body.
Scott Martorelli : I’m not happy with my 129C at all. I bought it less than a year ago at Lowe’s; always used Husqvarna brand canned gas (no ethanol), but now it won’t start. I wish I had purchased an Echo.
+Laura B. All it needs is probably a simple carburetor cleaning. Just for the heck of it try something that i noticed works on hard starting 2-cycle engines. Take the spark plug out put 4 drops of 30W oil down the hole put the plug back in and see if it starts don't know why but i have gotten so many hard starting engines to actually run that way. If that works great if not its going to need a carburetor cleaning.
I noticed that you placed the metering diaphragm first against the carb body then the gasket. According to Zama (and Walbro), the gasket is placed first on the carb body, then the diaphragm. Here is a link to Zama's site: www.zamacarb.com/carburetors/641
But, I guess it doesn't matter because you got that engine running great.
BTW, how old do you think that Husqvarna (Husk varna ... only two syllables) is? I was given a 30 year old Echo that I fixed up and it runs super. Amazing how the design on the cube style carbs has changed so little over three decades!
You are right!!! Well I checked back at 8:47. Funny thing is runs great. Now this video is a year old. Maybe I switch it later but i am going to check it and I WILL get back to you and enter a correction. By the way that is a great diagram.
Bruce
I posted the Zama site Thanks so much I still haven't check my trimmer as it runs so good. Interesting eh!!!!
Good job Bruce,did you change your feul line as well? ethanol does a number on em
HMMM The video is 2 years old. I think I did as the trimmer was laying around for quite a while.
Great video! Help me so much Thank you.
That is too cool. Good for you
A piece of cake for you to fix that. An English expression meaning its will be very easy for you to do the job
*Great trimmer plenty of power easy on fuel 🌴 **allabout.wiki/Husqvarna** and not as heavy as a Honda but has a great Honda engine, wish I would have purchased a long time ago.*
Interesting This is a gas one??
hello i got the same trimmer and bought a new carb for it and it wont run, unless i keep spraying starting fluid in it. any idea what might be wrong? acts like its not getting fuel. also put new fuel filter and line
Wow a new carb should help unless the crank seals on the main shaft are leaking. Lots to google there. Sorry I am not more help
i didnt pay close enough attention to how the throttle cable connects to the carby. ive tried a few different ways but then the trigger doesnt press in. any advice?
At around 1:53 the throttle line is through the throttle hole they are the same size. Sorry this video was made 7 years ago.
Those tiny jewelbox carbs are best fixed with a 3 pound engineers hammer and an anvil.
180 grains @ 3000 fps.
On the metering side, I believe the gasket goes against the body and the metering diaphragm goes next to the cover?
Yep I caught that as well got them backwards
How does it work without a primer bulb.???
Just put it on full choke
The Swedes pronounce it Hoosk-Varna. The Americans seem to add a syllable, pronouncing it Husk-A-Varna.
I do that too. I Think it is a dialect issue. Thanks Laura.
Great job 😀
Dude: Great video!! Thanks for taking the time to post!!
Thank you for watching.
just got a 235r it is missing some parts eg engine cover but the carb and filter was all there and one hose from the carb into the tank ive seen some of these have primer bulbs and some dont anyone shed an light on this for me i am wanting to get it up and running
Just google anything and numbers you can find.
Nice I have the same Husqvarna 225l but the year on mine is 1998. I know that I took mine apart and I need a new flywheel, piston rings. The last time I had it running the shaft wasn't spinning while engine was running and the engine would die at idling speeds..
There is a centrifugal clutch in there. also adjust he low and high on the carb. . It may need more as you know. Keep at it.
Some of the best snippers made the old husqies.my husqie 232r is 20 year old this year ,still never misses a beat,she just takes a few more pulls to get er going,shes a bit like me ,takes a while to get going but once going look out.like freight train coming.
Yes this one has power too!!!
+Bruce Pender i have a old lawnmower with a Tecumseh BVS engine when i pull the rope it it does not pull it back. Greetings from Finland.
Nico Stenfors The rewind should come off with 3 1/4 inch bolts
Nice trimmer I've got the 232L there identical to the 225L just more powerful best husqvarna trimmers ever can't get them anymore husqvarna stopped making them in the late 90s I'm lucky to have my 232L love it
A bit heavy for me now that I am in my 60's
Thanks for the info on the L/H adjustments. I usually stay away from carbs but the rebuild and startup went great :)
Wiw this video was made in 2015. thanks for watching.
Awesome vid!!!💯💯💯
Glad you liked it!!
good one, bruce...
grazie sei stato molto utile
stai arrivando
Good job Bruce, that's a really nice Husquvarna!
Alan Marshall Thanks. It was scrounged (a young guy gave it to me who lived next door to a co-worker). It is handy for the bigger weeds.
perfectly done no non sense or slack video , just a constant flow of proper information getting straight to the point
Thanks
Its (phonetically) huskvarna
Right All over the world folks have this conversation. Thanks for the input. Tomato Potato LOL
Great video! Thank you.
Glad you liked it!
Great video as always bruce
I appreciate that
how did you get the choke to work right
HMM This is a 2 year old video. I think I had trouble lining up the lever with the case slot. it just took time sorry my friend.
I can’t believe your left handed as well.