Hello again Sir Ken! To my surprise today, I have both of my granddaughters babysitting me. I showed them your latest Blooper reel and they were excited to see your Miss Ellie on the show. We were going through some videos for Christmas gift ideas after that and just so happened to run up on this one of yours from eight years ago. The girls immediately said, "that guy looks just like Kenny... but with hair!" Oh, the innocence of children. Anyway, we are resurrecting your candle holders today! Thanks for the content... and giving me ideas to keep these girls busy!
Kenny with hair. LOL. Out of the mouths of babes. I hope you guys enjoyed the older show. Good luck on your project and thanks for tuning in again. Some of the older shows still have merit.
I have seen pictures of candles like that in magazines around Christmas for years and never even thought of making some. Thanks my friend for the huge start. God Bless
+Frank Ingram Glad that you enjoyed the show. I hope you continue to enjoy the show and post your comments and questions as the new 2016 videos come out. Thanks for tuning in and good luck with your candle making. Good luck. If you have any questions, feel free to ask.
+CMR Woodworks | Chris McDowell They definitely are a quick and fun little project. Great way to use up some off cuts from other projects as well. Thanks for tuning in to the show and thanks for taking the time to leave me a comment. It's appreciated.
+Steve Brown You're very welcome. I'm glad that you enjoy the show. If you have any questions at all or requests for show ideas, feel free to ask. I will see what I can do.
+Jerry Hickey Glad that you liked it sir. Thanks once again for tuning in to the show. Always great to hear from you and read your comments and kind words.
+Tom Jackman Glad to hear that you enjoyed the show. I wasn't going to post this video this week, but my wife thought that I needed to give folks time to make some for Christmas. I guess she was right. Thanks for tuning in to the show.
+Hu “cillyede” Ko You can easily make a pile of these in an afternoon. Once you have the table saw set up, it's a quick and easy project to undertake. Good luck with your candle holders and if you have any questions, feel free to ask.
+kennyearrings1 always do.. I don't know if you subscribe to other channels but maybe you could checkout my channel sometime I do weeklies on Tuesdays and or Fridays Thanks and have a good one
You don't need expensive tools to make these candle holders. A drill and a fret or coping saw would work perfectly. Even just a handsaw to cut the initial pieces. Fancy tools don't make the project, the woodworker makes the project and the tools just assist him. Give it a try. Thanks for tuning in to the show.
Glad to hear it. Thanks for tuning in and for subscribing. Glad to have you as a viewer. With over 600 episodes of the show on the channel, I hope there will be something of interest to you.
+B_K_Builds Consider yourself as getting the green light. With a smaller blade (possibly 1/8") you can easily cut these on a band saw. Heck, you could cut them by hand with a coping saw. You could sand the profiles down with a disc sander. There are a million ways to accomplish one project. Go for it. If you have any questions at all, feel free to ask. I'd be more than happy to help you out.
+kennyearrings1 lol green light on the band saw from my wife. She bought it for me for Christmas and says I can't use it till then 😞 thanks for the info and video!
What is the name of the drill bit that you use for the recessed part please. Also is there something to judge how deep you are going, or you just eyeball what’s half of your material?
The name of the bit is called a Forstner bit Julie and they are used to drill flat bottomed, stopped holes like I drilled for these candle holders. The best way to gauge your depth, is to place a mark on the edge of your stock where you want the bottom of the hole to be. Then, lower your bit to that mark and set the depth stop of your drill press to stop the bit at the line. If you are drilling by hand, using a hand held drill, you can align the bottom of the bit with the mark and then place masking tape to the bit, in line with the surface of the wood. When the tape gets to the wood's surface, your hole is deep enough. I hope this helps. Thanks for tuning in to the show.
@@acutabove_woodworkings wow thank you so much. I have a drill press, but it was given to me. I’ve used it several times, but didn’t know you could set a depth stop. I will need to TH-cam it Thank you so much for your help
@@juliedeane9541 If your drill press doesn't have a depth stop, I produced a show a while back on how to make your own. It's an older (and kind of goofy) show but you can easily search my channel's content to find it. I hope this helps.
+kris stankievech That "stencil" is call an INCRA T-rule and you can get them directly from INCRA, or many woodworking stores carry them. They are available in imperial and metric measurements and are absolutely awesome. I use mine for everything in the shop. www.incra.com/measuring_marking-trules.html They are also available at Lee Valley Tools. www.incra.com/measuring_marking-trules.html Thanks for tuning in.
There have been many people ask this question in the past and for good reason. Those particular devices are fantastic. They are made by INCRA and are call the INCRA T-rule. You can find them on INCRA's site or there are many woodworking stores (including Lee Valley) that sell them. Here is the link to the INCRA site. www.incra.com/measuring_marking-trules.html
+joseph poncik This question seems to be one of the more popular ones on my show. The layout lines are drawn with an INCRA T-rule. They are available from most major woodworking stores. Lee Valley Tools carries them in Imperial measurements only, but if you require metric, those are available directly from INCRA's website. www.leevalley.com/en/wood/page.aspx?p=58877&cat=1,43513,58883,58877 www.incra.com/measuring_marking-trules.html
Great project Kenny just in time for Christmas, be perfect them on the table while tucking into your Christmas Food mmmmmmmmmm Christmas Food.Anyway back to planet earth, I thought that any of the 3 sizes looked good. Would the wood show up better if it had anything on it? as long as it was fire proof that is? don't want the Christmas Food going up in flames. Oh dear it's happening again!!! mmmmmmmmmmm Christmas Food. Ha Ha as you can tell I love my Christmas Food, anyway Kenny hope you had a good Thanks Giving with the family on Thursday. Take Care my Friend, Barry from England.
+Barry Roberts Funny that you should mention about it being in time for Christmas. I wasn't going to post this show this week and my wife suggested that I post it to give people time to make them for Christmas. That way, they can have them on the table while they eat their Christmas dinner.............mmmmmmmmmmmmmmmmmmm, Christmas dinner. The ones shown in the video are unfinished, but they have since been coated with some danish oil and it really brings out the grain in the maple and really darkens the walnut. They look great. Any finish would be fine, as they will never be in contact with the flame and the top surface will never get hot enough to ignite. As for Thanksgiving..........us Canadians have our Thanksgiving in October. It was the American Thanksgiving on Thursday. I guess I will have to wait until December to have some of that delicious Christmas turkey dinner..............mmmmmmmmmmmmmmmmm, Christmas turkey dinner.
+kennyearrings1 I forgot Canadians celebrate in October, sorry. Hope you had a good day when you had yours. Looks like you enjoy the Christmas dinner as well mmmmmmmmm Turkey mmmmmm, here we go again ha haGood Video again Kenny, take care my friend. Barry.
Hello again Sir Ken! To my surprise today, I have both of my granddaughters babysitting me. I showed them your latest Blooper reel and they were excited to see your Miss Ellie on the show. We were going through some videos for Christmas gift ideas after that and just so happened to run up on this one of yours from eight years ago. The girls immediately said, "that guy looks just like Kenny... but with hair!" Oh, the innocence of children. Anyway, we are resurrecting your candle holders today!
Thanks for the content... and giving me ideas to keep these girls busy!
Kenny with hair. LOL. Out of the mouths of babes. I hope you guys enjoyed the older show. Good luck on your project and thanks for tuning in again. Some of the older shows still have merit.
This video just came up. Your videos are very clear and easy to follow. Thank you.
I'm glad that you like them Laura. Thanks for tuning in to the show.
I have seen pictures of candles like that in magazines around Christmas for years and never even thought of making some. Thanks my friend for the huge start. God Bless
+Frank Ingram Glad that you enjoyed the show. I hope you continue to enjoy the show and post your comments and questions as the new 2016 videos come out. Thanks for tuning in and good luck with your candle making. Good luck. If you have any questions, feel free to ask.
I like the look of this candle holder! Looks like a fun, quick project.
+CMR Woodworks | Chris McDowell They definitely are a quick and fun little project. Great way to use up some off cuts from other projects as well. Thanks for tuning in to the show and thanks for taking the time to leave me a comment. It's appreciated.
Nice project, going to have a go at some of these myself.
Glad that you liked it David. Thanks for tuning in to the show.
Great project! I will have to make some. Thanks for what you do and for sharing it with us!
+Steve Brown You're very welcome. I'm glad that you enjoy the show. If you have any questions at all or requests for show ideas, feel free to ask. I will see what I can do.
Very nice project Ken. Thanks for sharing!
+Jerry Hickey Glad that you liked it sir. Thanks once again for tuning in to the show. Always great to hear from you and read your comments and kind words.
Nice and in time for Christmas.
Got me thinking.
Cheers from Japan
+Tom Jackman Glad to hear that you enjoyed the show. I wasn't going to post this video this week, but my wife thought that I needed to give folks time to make some for Christmas. I guess she was right. Thanks for tuning in to the show.
+kennyearrings1 Allways listen to your wife:)
If she reads this, I'm doomed. LOL.
+kennyearrings1 :)
Great little project. I watched it only now. King Arthur is jealous what you everything can do with his sword. 🙂
King Arthur didn't know what he had. LOL. Thanks for tuning in to the show Hans. Good to hear from you.
Very nice! I'll try to make some for gifts. Thanks fot posting.
Hubert/Germany
+Hu “cillyede” Ko You can easily make a pile of these in an afternoon. Once you have the table saw set up, it's a quick and easy project to undertake. Good luck with your candle holders and if you have any questions, feel free to ask.
Thanks and take care!
You are very welcome.
very nice little project .thank you
+dennis medeiros Glad that you enjoyed the show. I hope you will continue to enjoy future broadcasts. Thanks for tuning in.
Another nice project Kenny.
+Chem Cody Glad to hear that you enjoyed it. Thanks, once again, for taking the time to leave me a comment and for tuning in to the show.
good stuff....quick easy and looks nice!
+Joe basementwoodworking Definitely and easy and quick project. Thanks for tuning in to the show.
+kennyearrings1 always do.. I don't know if you subscribe to other channels but maybe you could checkout my channel sometime I do weeklies on Tuesdays and or Fridays Thanks and have a good one
I'd love to check out your channel. Thanks for bringing it to my attention.
Subscribed.
kennyearrings1 awsome! Tha ks man!glad to have ya aboard...
I like the design, but I guess I won't be able to make these because I don't have expensive enough tools 😢
You don't need expensive tools to make these candle holders. A drill and a fret or coping saw would work perfectly. Even just a handsaw to cut the initial pieces. Fancy tools don't make the project, the woodworker makes the project and the tools just assist him. Give it a try. Thanks for tuning in to the show.
Sub’d. Nice job!!
Glad to hear it. Thanks for tuning in and for subscribing. Glad to have you as a viewer. With over 600 episodes of the show on the channel, I hope there will be something of interest to you.
I like u r character.. go a head
Im from middle east.. British do things perfect
I'm not from Britain....I'm from Canada but thank you for tuning in and for the kind words.
I plan on making these once I get the green light to use my band saw... do you think the scroll work could be done on the band saw?
+B_K_Builds Consider yourself as getting the green light. With a smaller blade (possibly 1/8") you can easily cut these on a band saw. Heck, you could cut them by hand with a coping saw. You could sand the profiles down with a disc sander. There are a million ways to accomplish one project. Go for it. If you have any questions at all, feel free to ask. I'd be more than happy to help you out.
+kennyearrings1 lol green light on the band saw from my wife. She bought it for me for Christmas and says I can't use it till then 😞 thanks for the info and video!
I tried to help you out. ha ha ha ha ha ha ha ha ha ha ha ha. Want me to explain to your wife that you absolutely NEED a band saw? LOL
Or to let you use it early.
What is the name of the drill bit that you use for the recessed part please. Also is there something to judge how deep you are going, or you just eyeball what’s half of your material?
The name of the bit is called a Forstner bit Julie and they are used to drill flat bottomed, stopped holes like I drilled for these candle holders. The best way to gauge your depth, is to place a mark on the edge of your stock where you want the bottom of the hole to be. Then, lower your bit to that mark and set the depth stop of your drill press to stop the bit at the line. If you are drilling by hand, using a hand held drill, you can align the bottom of the bit with the mark and then place masking tape to the bit, in line with the surface of the wood. When the tape gets to the wood's surface, your hole is deep enough. I hope this helps. Thanks for tuning in to the show.
@@acutabove_woodworkings wow thank you so much. I have a drill press, but it was given to me. I’ve used it several times, but didn’t know you could set a depth stop. I will need to TH-cam it Thank you so much for your help
@@juliedeane9541 If your drill press doesn't have a depth stop, I produced a show a while back on how to make your own. It's an older (and kind of goofy) show but you can easily search my channel's content to find it. I hope this helps.
that stencil you have is the coolest thing ive ever seen where would i find one of those or the name so i can try and locate one!
+kris stankievech
That "stencil" is call an INCRA T-rule and you can get them directly from INCRA, or many woodworking stores carry them. They are available in imperial and metric measurements and are absolutely awesome. I use mine for everything in the shop. www.incra.com/measuring_marking-trules.html
They are also available at Lee Valley Tools. www.incra.com/measuring_marking-trules.html
Thanks for tuning in.
Thanks!
+Michael McDermott You're very welcome. Glad that you enjoyed the show.
Is there a specific name for the tool you used to mark out the measurements?
There have been many people ask this question in the past and for good reason. Those particular devices are fantastic. They are made by INCRA and are call the INCRA T-rule. You can find them on INCRA's site or there are many woodworking stores (including Lee Valley) that sell them. Here is the link to the INCRA site. www.incra.com/measuring_marking-trules.html
what do you use to draw out your lines?
+joseph poncik This question seems to be one of the more popular ones on my show. The layout lines are drawn with an INCRA T-rule. They are available from most major woodworking stores. Lee Valley Tools carries them in Imperial measurements only, but if you require metric, those are available directly from INCRA's website.
www.leevalley.com/en/wood/page.aspx?p=58877&cat=1,43513,58883,58877
www.incra.com/measuring_marking-trules.html
Great project Kenny just in time for Christmas, be perfect them on the table while tucking into your Christmas Food mmmmmmmmmm Christmas Food.Anyway back to planet earth, I thought that any of the 3 sizes looked good. Would the wood show up better if it had anything on it? as long as it was fire proof that is? don't want the Christmas Food going up in flames. Oh dear it's happening again!!! mmmmmmmmmmm Christmas Food. Ha Ha as you can tell I love my Christmas Food, anyway Kenny hope you had a good Thanks Giving with the family on Thursday. Take Care my Friend, Barry from England.
+Barry Roberts Funny that you should mention about it being in time for Christmas. I wasn't going to post this show this week and my wife suggested that I post it to give people time to make them for Christmas. That way, they can have them on the table while they eat their Christmas dinner.............mmmmmmmmmmmmmmmmmmm, Christmas dinner. The ones shown in the video are unfinished, but they have since been coated with some danish oil and it really brings out the grain in the maple and really darkens the walnut. They look great. Any finish would be fine, as they will never be in contact with the flame and the top surface will never get hot enough to ignite. As for Thanksgiving..........us Canadians have our Thanksgiving in October. It was the American Thanksgiving on Thursday. I guess I will have to wait until December to have some of that delicious Christmas turkey dinner..............mmmmmmmmmmmmmmmmm, Christmas turkey dinner.
+kennyearrings1 I forgot Canadians celebrate in October, sorry. Hope you had a good day when you had yours. Looks like you enjoy the Christmas dinner as well mmmmmmmmm Turkey mmmmmm, here we go again ha haGood Video again Kenny, take care my friend. Barry.
You take care as well sir. Thanks for the laugh.