Sometimes my STI (older mags) won't fall out. Can you make a video of all the places to look for contact, and what to do? Is there anywhere a mag should be sanded down? Or should mostly all work be done on the grip, sear, mag button etc?
Love your videos! Could you do a video on on capacity between the different magazine bodies and parts combinations for 170mm and 140mm? 9mm, 38SC, and 40?
Hi there I have a sti edge 2011 in 38super all but the last round gets stuck then when I press the slide release it goes into the barrel an fires is the extrader to tight or does the mag need tuning
I just bought 4 of your magazines and the springs are hard as hell and I can only load about 7-8 before they get stuck and start tilting. Any suggestions?
The mag springs are often stiff on the first couple loads. Try loading the mags and letting them sit for a couple hours or over night. That should loosen them up.
Please send me you information. I have an STI 9mm carry gun and one of my mags the spring and follower stick about half way down the tube. The magazine was a year old before I took it out of the package to use and it started acting up immediately.
![โกดำ - วสันต์17 x ไม้เมือง [Official Music]](http://i.ytimg.com/vi/OUg2L4Sx1TY/mqdefault.jpg)
Sometimes my STI (older mags) won't fall out. Can you make a video of all the places to look for contact, and what to do? Is there anywhere a mag should be sanded down? Or should mostly all work be done on the grip, sear, mag button etc?
th-cam.com/video/hDYl0t5dhDY/w-d-xo.html
Love your videos! Could you do a video on on capacity between the different magazine bodies and parts combinations for 170mm and 140mm? 9mm, 38SC, and 40?
I will add that to the list, might be a while
Hi there I have a sti edge 2011 in 38super all but the last round gets stuck then when I press the slide release it goes into the barrel an fires is the extrader to tight or does the mag need tuning
Thank you, when the feed lips widen up and you have to adjust it back. What is the best way to adjust it back?
nylon hammer tapping the back corners lightly
@@adamnilson6341 thank you!
I just bought 4 of your magazines and the springs are hard as hell and I can only load about 7-8 before they get stuck and start tilting. Any suggestions?
The mag springs are often stiff on the first couple loads. Try loading the mags and letting them sit for a couple hours or over night. That should loosen them up.
Be sure to load them to 100% before letting them sit
@@AtlasGunworks thanks I’ll do that
Please send me you information. I have an STI 9mm carry gun and one of my mags the spring and follower stick about half way down the tube. The magazine was a year old before I took it out of the package to use and it started acting up immediately.
Atlas Gunworks 823 ferry Rd
Charlotte VT.
call first 802-777-7258
what are the specs for the feed lips for 9mm mags
How would I find the lip distancing for 38 super ?
its generally plus .005 to .010 of 9mm
lately I have guns them around .365
.350 to .360 front
.340 to .350 back
keep .07 to .1 difference between front and back