A bit hypocritcal to criticize/demonize electric cars when your a grown-a__ man playing with electric cars, dont you think? Maybe you should switch to nitro/gas so you can enjoy the toxicity, stink, mess.
A bit out of line making a s___ a__ comment to someone you don't know based on one F______ video don't you think? Maybe you should switch to watching other fake news content instead 🤷.
The steering endpoint adjustment settings wasn't in the manual for any of the 3s line either. I had to learn the hard way after I burned out my first servo in my Big Rock. Razor RC has a good video about it. 👍😎
Heavier tires may help with the air control. I also hate the way the body clips go in. I bought some RCAWD clips off of Amazon that are angled so they go in better/easier. They also came with the rubber retainer if needed. They were a bit expensive though at $8 for the 4 pack.
Thank you for making this public service announcement. I have a brand new Typhon 3S and a new X max 8S and I assumed they come from the factory with the correct presets.
the problem i have is that after going through this exact process i lose the settings and half of my steering throw. It just won't save the end points. I have the same problem on multiple arrma 6s cars.
Nothing more frustrating then trying to line your servo up perfect so you can balance the turn radius on both sides and the servo horn wont with in the spot you want
A bit hypocritcal to criticize/demonize electric cars when your a grown-a__ man playing with electric cars, dont you think? Maybe you should switch to nitro/gas so you can enjoy the toxicity, stink, mess.
A bit out of line making a s___ a__ comment to someone you don't know based on one F______ video don't you think? Maybe you should switch to watching other fake news content instead 🤷.
Glad I watched this!!! 1000% not having endpoints set will destroy servos! THAT SHOULD unequivocally come from the factory pre-set!!!
The steering endpoint adjustment settings wasn't in the manual for any of the 3s line either. I had to learn the hard way after I burned out my first servo in my Big Rock. Razor RC has a good video about it. 👍😎
Heavier tires may help with the air control. I also hate the way the body clips go in. I bought some RCAWD clips off of Amazon that are angled so they go in better/easier. They also came with the rubber retainer if needed. They were a bit expensive though at $8 for the 4 pack.
Thank you for making this public service announcement. I have a brand new Typhon 3S and a new X max 8S and I assumed they come from the factory with the correct presets.
With arrma you have to set your steering limits on the servo or it’s likely to strain when over turning and burn out.
Cool info! Thanks 👍
In you move the batt box back it will help with the nose dive issue.
Hand breakers a tap to get the slide holding it seems to cause a spin 👍👍
Ah yes a very important fact that is omitted from the manual?! I have a question what’s binding the transmitter about?
Great vid to kick back to while eating noodles!..😂👍
Great advise on endpoints an how to recalibrate the radio!..👍😎
What kind of NOODLES😂🤣
Back in one peice and ripping around again. And 80% of a pack through it.. lol...see how long the beasty holds up.
the problem i have is that after going through this exact process i lose the settings and half of my steering throw. It just won't save the end points. I have the same problem on multiple arrma 6s cars.
My 6s kraton only had one spacer as well
I guess it doesn't really matter🤣 such a minor thing 👍
@@rcguygarage true
Guy I bet the spacer was missed in production.
Clip less body mod for a fireteam 👑🤔🤔
mine has spacer on both sides
WHAT?!?!?! Yeah I figured as much👍💯 that guy HAD ONE JOB
Don’t squeeze that throttle if the handbrake is engaged. 😬
No audio
You're the first one to say that
Are you sure that’s your fire team transmitter???
😆
Nope
Rip it up guy
To bad there isn't away to rig it to the reverse
Nothing more frustrating then trying to line your servo up perfect so you can balance the turn radius on both sides and the servo horn wont with in the spot you want
Ready to Run should mean its READY! Not ready for the customer inspection.
You’re still fighting with it. Why?
🤷
Take the bait 😳QC is not on point 😱
What an over complicated way to set end points 🤦
First
📢 SQUAD📢