I’ve been through a few of these. ; ) If you need more helpful tips, check out: th-cam.com/video/X0AdFxkJiOg/w-d-xo.html and if you need parts: www.ebay.com/str/midnebraskamotorsports. thanks for watching and the comment.
Youre a bright dude. Sure you could teach a class for a school no problem. I've only got 2 quads but try to check out the other videos for other bikes too. Keep up the good work.
My Arctic cat 400 manual has locked up somewhere in the drive system. It will shift through all gears, but will only roll about 1/4 turn of the tires in either direction until it locks up. Any idea what it would be? I've ruled out the differentials, by removing the rear driveshaft.
You can turn the engine over backwards. I would be very careful and inspect the lower end in case the chain bound up and broke the cam guide holder. Let us know. We have more Eiger videos coming. Make sure you hair the subscribe button.
I got the same engine and I pulled the side cover and them gears fell off before I could see were they went along with some spacers have no idea how they go can I get some help please
We will have a video coming out soon, that will include what "under that cover" looks like. Make sure you hit that subscribe button so you are notified when that video comes out! Thanks for watching. Here is a good parts out let if needed: www.ebay.com/str/midnebraskamotorsports
How do you get the Toe - Heel Shifter off without stripping out the head - and what Impact Driver do you use or recommend for working on ATV's to remove the bolts. I have an 2002 Arctic Cat 400I with the Manual Shifter that has burned up 2 regulators and I am planning on rewiring and placing all the component on the Front Rack for Easier Maintenance.
Is this the same 366cc fan cooled engine thata been around for like 10+ years i could be wrong tho idk nothing about it but i got a 2017 arctic cat alterra 400cc/366cc kymco engine looks the same as this 1
When I put everything back together it will either go in hi and rev, or hi and lo I can never get it to go in her/lo/rev. I've tore it down and redid my work 5-6 time's. I'll try your suggestion. Thank you for your time.
@@MidNebraskaMotorsports I’m already a subscriber. Love your videos ! Having some issues with 2007 Arctic cat 400. Gets hot and won’t start. Then backfires and carries on. Wanted to make sure I could get parts so if I can get Suzuki I might be ok. So far I’m not impressed with Arctic cat. Are they just a bad investment? Terrible customer service.
You took that apart, like a child taking apart a tinker toy. Piece of cake. 👍
I’ve been through a few of these. ; ) If you need more helpful tips, check out: th-cam.com/video/X0AdFxkJiOg/w-d-xo.html and if you need parts: www.ebay.com/str/midnebraskamotorsports. thanks for watching and the comment.
Youre a bright dude. Sure you could teach a class for a school no problem. I've only got 2 quads but try to check out the other videos for other bikes too. Keep up the good work.
My Arctic cat 400 manual has locked up somewhere in the drive system. It will shift through all gears, but will only roll about 1/4 turn of the tires in either direction until it locks up. Any idea what it would be? I've ruled out the differentials, by removing the rear driveshaft.
Anyway to easily free up the timing chain that got in a bind while turning motor over with pull cord to raise piston?
You can turn the engine over backwards. I would be very careful and inspect the lower end in case the chain bound up and broke the cam guide holder. Let us know. We have more Eiger videos coming. Make sure you hair the subscribe button.
Great videos!!! Do you have any of the Arctic Cat 400 Motor Rebuild Videos? Thanks!!
Do u have to set timing when replacing rear drive gear when u do a case split will timing be good when you put motor back together
Is there a video of putting the cylinder and top end back together ??
I got the same engine and I pulled the side cover and them gears fell off before I could see were they went along with some spacers have no idea how they go can I get some help please
We will have a video coming out soon, that will include what "under that cover" looks like. Make sure you hit that subscribe button so you are notified when that video comes out! Thanks for watching. Here is a good parts out let if needed: www.ebay.com/str/midnebraskamotorsports
How do you get the Toe - Heel Shifter off without stripping out the head - and what Impact Driver do you use or recommend for working on ATV's to remove the bolts. I have an 2002 Arctic Cat 400I with the Manual Shifter that has burned up 2 regulators and I am planning on rewiring and placing all the component on the Front Rack for Easier Maintenance.
Hey bud is there a gasket when you take the valve rocker cover off cause mine keep leaking
Sir,
Is it necessary to remove the whole motor/transmission to rebuild the clutch?
Sir,
Do you have the 2nd video where you took the other side apart?
Is this the same 366cc fan cooled engine thata been around for like 10+ years i could be wrong tho idk nothing about it but i got a 2017 arctic cat alterra 400cc/366cc kymco engine looks the same as this 1
How do you get the transfer gears lined back up if they come out when you pull the stator cover?
When I put everything back together it will either go in hi and rev, or hi and lo I can never get it to go in her/lo/rev. I've tore it down and redid my work 5-6 time's. I'll try your suggestion. Thank you for your time.
Is 2007 arctic cat 400 the same as Suzuki eiger? Heard Arctic cat used Suzuki engine
@@MidNebraskaMotorsports I’m already a subscriber. Love your videos ! Having some issues with 2007 Arctic cat 400. Gets hot and won’t start. Then backfires and carries on. Wanted to make sure I could get parts so if I can get Suzuki I might be ok. So far I’m not impressed with Arctic cat. Are they just a bad investment? Terrible customer service.
i see it thanks