PSE 2024 Evolve 30 and 33 Bow Review by Mike's Archery

แชร์
ฝัง
  • เผยแพร่เมื่อ 16 ต.ค. 2024

ความคิดเห็น • 13

  • @johngarnergarner6724
    @johngarnergarner6724 4 หลายเดือนก่อน

    When Mike was shooting the bows I was able to guess within a foot per second the speed. That would probably go up a bit with 80% letoff.

  • @owsowmuskwanaistus9213
    @owsowmuskwanaistus9213 11 หลายเดือนก่อน +1

    speeds must be awsome at 80 percent let off and i can see they draw really smooth barely any hump at 29"

  • @michaeltubbs2493
    @michaeltubbs2493 11 หลายเดือนก่อน

    Great bow!

  • @Mountain91648
    @Mountain91648 11 หลายเดือนก่อน +2

    I wonder why they don't make them in first lite anymore:(

    • @jcscustomarchery8247
      @jcscustomarchery8247 11 หลายเดือนก่อน

      Either licensing went out or demand wasn’t high enough

  • @jcscustomarchery8247
    @jcscustomarchery8247 10 หลายเดือนก่อน +2

    Honestly think his chrony is slow and my numbers from my garmin chrony & pro chrony
    Measured 29" 70.1#
    350 grain arrow 328 fps
    457 grain arrow 287 fps
    515 grain arrow 274 fps

    • @Fite234
      @Fite234 9 หลายเดือนก่อน

      Was that the 30 or 33?

    • @jcscustomarchery8247
      @jcscustomarchery8247 9 หลายเดือนก่อน +2

      @@Fite234 my numbers are from the Mach 30 DS and the evolve 30 DS

  • @jakecarter1160
    @jakecarter1160 11 หลายเดือนก่อน

    I wonder why Mike would speed test at the slowest setting (90%)?!

  • @optimuscrime608
    @optimuscrime608 11 หลายเดือนก่อน

    Why would they change the limb angle when they just changed it to more parallel a few years back and now they are going back to less parallel limbs? Doesn’t make much sense.

  • @stephenryder8143
    @stephenryder8143 11 หลายเดือนก่อน

    Those reflex measurements seem high ?

    • @davidhanebuth4954
      @davidhanebuth4954 11 หลายเดือนก่อน +2

      I seen a guy measure the 33 at 2 inch reflex. I agree, those numbers are not right .

  • @south_hunts_605
    @south_hunts_605 11 หลายเดือนก่อน +1

    Reflex measurements are inaccurate though.