Very useful animation, thank you. Did you leave out removing the wear bushing before running casing to not make the animation overly complicated or do you not need to remove the wear bushing for your wellhead?
Thank you so much for uploading this video.as you may know understanding of wellhead is very hard and now I know the differences between casing spool.tubing spool and ... well Thank you
In the video, he said a scentence which is " The surface pipe is drained " , what does he means ?? How to drain surface casing ?? Can you please explain more ??
In the video, he said a scentence which is " The surface pipe is drained " , what does he means ?? How to drain surface casing ?? Can you please explain more ??
Iam new one in this field after learn can better work .Because professional in any trade such as Electrical,Mechanical Engineering can learn better after watch video.
All is good but how can you nipple down diverter before cutting the casing above the diverter ? This dose not make any sense … first cut the surface casing above the diverter then nipple down diverter
In the video, he said a scentence which is " The surface pipe is drained " , what does he means ?? How to drain surface casing ?? Can you please explain more ??
from 7:07 , it become totally wrong, drill out the production casing float shoe will let the formation fluid came into the casing. When the producting start, you will find not only gas and oil that you want.
In the video, he said a scentence which is " The surface pipe is drained " , what does he means ?? How to drain surface casing ?? Can you please explain more ??
@@user-kn9it6be4b In the video, he said a scentence which is " The surface pipe is drained " , what does he means ?? How to drain surface casing ?? Can you please explain more ??
In the video, he said a scentence which is " The surface pipe is drained " , what does he means ?? How to drain surface casing ?? Can you please explain more ??
@ghostdevill There are some more parts to install before we set up the oiljack ( pumping unit ). Such as ( inside the well ): tubing pump 2" + tubing production 3" + tubing hanger /tubing head. Tubing head is istalled /sit inside the wellhead /casing head. More parts ( inside the production tubing ): plunger ( will run into the tubing pump ), sucker rods ( above the plunger till the tubing head /tubing hanger ). More parts on the tubing head /tubing hanger: pup join 3" × 2' + T 3" + stubbing box + polish rod + pony rod. The polish rod will connect to the oiljack ( pumping unit ) by using some clamps. The plunger + sucker rods + polish rod + pony rod will go up and down to pump out the oil. The oil will go aside by the T 3" and enter the flow line heading to the gathering station.
I am truly interested in more videos about Completion and Workover processes ...Keep up the good job
I always enjoyed machining the various spools, adapters, bushings, hangers, annulars and ram blowout preventers but even more to see how they’re used.
Best video I have seen explaining the well head and BOP installation
Ibrahim..Thanks for step by step information..really helpful
Very useful animation, thank you. Did you leave out removing the wear bushing before running casing to not make the animation overly complicated or do you not need to remove the wear bushing for your wellhead?
Thank you so much for uploading this video.as you may know understanding of wellhead is very hard and now I know the differences between casing spool.tubing spool and ... well Thank you
thanks Ibrahim, very helpful
Thanks so much for the video Ibrahim.
GREAT VIDEO. Thanks for sharing.
Joss
Here after "The Ice Road".
Fantastically useful video, i would recommend to add some explanations for devices used like a bushing etc.
good video, thank you very much
Elie Meyer, the wear bushing is removed, otherwise there would be no space for the casing hanger to be installed in the casing head housing / spool.
Sir very informative video
Thank you sir
Thank you brother for this video which help me to understand what I have been study
Great video! Thanks!
Very informative. Thanks for sharing.
Excelente!!!
Great video!
Very useful. Thank you
its very u use full
thank u so much................
Thanks friend!
great video!
excellent !!
Short and very understandable!! Thanks for this
In the video, he said a scentence which is " The surface pipe is drained " , what does he means ?? How to drain surface casing ?? Can you please explain more ??
@@user-mv4zc5wn1b If u have got the answer, Could you please tell me??
Even I have the same doubt..
Thank you very much
Very Informative ... Thank you
thank you so much it's really help full
thank you
it is very clear, thank you
Thank you
Thank you very much 🤗🤗🤗
very knowledgable...
thks
شكرًا احسنت
Informative and well animated :)
In the video, he said a scentence which is " The surface pipe is drained " , what does he means ?? How to drain surface casing ?? Can you please explain more ??
Soutwoods city
@@user-mv4zc5wn1b? I hope you know drilling mud used
Well information
Thanks a lot😍it was very useful ❤🥳
informative one. Great
Good job
Iam new one in this field after learn can better work .Because professional in any trade such as Electrical,Mechanical Engineering can learn better after watch video.
Pwoli saanam.
Good vid. What kind of programe is that though, is it downlodable?
All is good but how can you nipple down diverter before cutting the casing above the diverter ? This dose not make any sense … first cut the surface casing above the diverter then nipple down diverter
Good information those working per API 6A
Curious. What is the actual source material that you took this from?
From where I can get this learning material
Nice
nice video. but i think u can add in when we remove the wear bushing. anyway thanks for sharing
In the video, he said a scentence which is " The surface pipe is drained " , what does he means ?? How to drain surface casing ?? Can you please explain more ??
it is very good animation , but it will be better if you should made it with more details
Good ,,,
from 7:07 , it become totally wrong, drill out the production casing float shoe will let the formation fluid came into the casing. When the producting start, you will find not only gas and oil that you want.
I WOULD LIKE to know more about istalation well head...thanks
what is wellhead tie-in sir
nice
What dose people called working in assembly shop
THANK YOU MATE. HOW CAN WE GET THIS ILLUSTRATION SOFTWARE
Test plug only goes neck up to install wear bushing and to retrieve wear bushing after drilling is complete
How can connect with u
Do u have linked email sent it to mr
In the video, he said a scentence which is " The surface pipe is drained " , what does he means ?? How to drain surface casing ?? Can you please explain more ??
@@user-kn9it6be4b
In the video, he said a scentence which is " The surface pipe is drained " , what does he means ?? How to drain surface casing ?? Can you please explain more ??
In the video, he said a scentence which is " The surface pipe is drained " , what does he means ?? How to drain surface casing ?? Can you please explain more ??
By creating holes in the pipe
Good job thanks
Interview ma kis type kyy questions put kra gyy
(y)
But how does this wellhead works with a oiljack?
@ghostdevill
There are some more parts to install before we set up the oiljack ( pumping unit ).
Such as ( inside the well ): tubing pump 2" + tubing production 3" + tubing hanger /tubing head.
Tubing head is istalled /sit inside the wellhead /casing head.
More parts ( inside the production tubing ): plunger ( will run into the tubing pump ), sucker rods ( above the plunger till the tubing head /tubing hanger ).
More parts on the tubing head /tubing hanger: pup join 3" × 2' + T 3" + stubbing box + polish rod + pony rod.
The polish rod will connect to the oiljack ( pumping unit ) by using some clamps.
The plunger + sucker rods + polish rod + pony rod will go up and down to pump out the oil.
The oil will go aside by the T 3" and enter the flow line heading to the gathering station.
Test plug goes neck down to test bop.
i find out after ice road movie
Pressureformationknowlegefromwhat? Oressuregafe
wellhead installation &multi-zone completion
Installation!
4:43
I mean its a great video but leaves many questions
Ibrahim: please correct Wellhead Installation.
super
اسمه ايه الكورس ده ؟؟ اسطواناته اسمها ايه ؟؟؟ونحملها منين ؟؟
Ты кто такой?
No entendí nada amigo, esta todo en ingles xD
thanks Ibrahim, very helpful