How to Airbrush for beginners - LEVEL UP HERE
ฝัง
- เผยแพร่เมื่อ 19 มิ.ย. 2024
- How to Airbrush for beginners, a guide. Teaching you everything you need to know about using an airbrush. Whether painting Warhammer 40k miniatures, Cosplay outfits or just making art, I run you through a step-by-step guide on the best ways to clean, use and effectively paint with this tool.
The Sparmax airbrush used - airbrushes.com/product_info.p...
Airbrush cleaning pot - amzn.to/2ACzNUi
Vallejo Model Air 200ml thinner - amzn.to/35N4TTx
Vallejo Model Air 200ml cleaner - amzn.to/37N30I7
---------------------------------------------------------------------------------------
Do you enjoy the content? If so, do check out the links below. Your support is greatly appreciated and means a lot. 😀
PATREON - Access to Discord and Patreon only videos
😊 / broadswordwargaming
Check out my Shop. Scenics, models and games. (EU based)
broadswordwargaming.com
Amazon shop - All your essentials
👌 www.amazon.com/shop/broadswor...
ELEMENT GAMES - Miniatures
🗡elementgames.co.uk/?d=10421
---------------------------------------------------------------------------------------
All Amazon links are affiliate links that we get paid for if you buy a product. You can support us by using these links. Thank you!
#Broadswordwargaming #Broadsword - เกม
If you liked this video and want to learn more, do check out some other videos, as I've been really refining the process in my latest videos. Also, if you'd like to support the channel AND gain access to a private Discord, do think about joining my Patreon www.patreon.com/broadswordwargaming, as your support is what keeps the channel going. THANKS! :)
I love this video but why can i only gain acces to the dicord if i pay on patreon is there something special on the discord ?
@@Flamish It's an additional bonus for patrons as supporters of the channel. Early access content, WiPs, chats, monthly hangouts and various other things on there.👍
One tip for new people with an airbrush that wasn’t mentioned is switching colors. It’s pretty easy all you have to do is rise with water a few times and spray out the extra paint still in the airbrush rinse one last time and it should be clean for a new color. I hope this helps!!!
For sure! Good tip. 😀
I’ve tried that and it simply does not work on mine. A compete tear down is required between colors.
@@crossbones8956 user error
@@crossbones8956 same here
@@crossbones8956 which airbrush do you use then?
I am a first time painter. This was easy to watch. Simple to understand. And easy to follow along. Thank you. Great video.
Glad it was helpful!
@@BroadswordWargaming are you near pittsburg?
THANK YOU for this! It's such a comprehensive look on how to use an airbrush for someone who's never picked one up in their life. I was surprised how may 'how to' vids on airbrushing that I've seen don't actually show you how to do some of this!
Just got my first airbrush so watched this again. Just as good the second time around. Great video.
Ah thanks Pickle.😊
Overall great video, but just to point out one important thing you said that was wrong - "get a dust mask to filter out fumes". A dust mask only filters dust, it will not do anything at all for fumes. To be honest, those cheap dust masks are not even very good for stopping dust either.
Ideally you should get yourself a decent respirator with an particulate and organic vapour filter. Not only does that stop any particles and fumes from paint, thinner and cleaning fluid, but if you later want to use more toxic paints such as enamels, primers etc. you can do so with no worries.
Also just to point out that the polyurethane primer you're using has some pretty nasty vapours and you should definitely get a proper respirator if you're using that often.
A lot of my fears of actually using my airbrush have been myth busted in this video so I think I am definitely going to get mine out and start practicing with it.
Really comprehensive video! I think you hit all the various points really well without going into too much detail and bogging the video down.
I started airbrushing a few years ago and honestly couldn’t do without it at this point. It’s such a valuable tool for a huge variety of techniques.
Thanks lad! Just got my first airbrush! Really excited! This’ll really help!
I love air brush so easy to learn & so cool to use!!!
After much hemming and hawing I finally got myself an airbrush set last week - your concise overview helped me decide.
It' s quite interesting finding your feet with a new tool if you've been painting a certain method for, well, decades.
But you're right - there's nothing to be afraid of.
Oh amazing. Honestly, it's the best tool I have mow, and I'd recommend it to everyone. Give it a go, get stuck in, and have some fun! 😀
Gonna use this as inspiration to paint my Predator tank when I can get thinner/cleaner. I'll post to the Hobby Group page! Thanks Ah-li!
Great video 👍, I agree people think it's so much more complex than it is. Production was very smooth keep them coming
This was fantastic, I've had my eye on moving to an airbrush lately, especially with the crappy weather here for rattle cans, and I've watched plenty of vids on the subject but honestly, yours is one of the best, concise and clear I've come across, really demystifies the whole process, thank you! 😁
Aw how kind of you, thank you! Im glad its helped.. I really think the airbrush is my favourite hobby tool ans has helped my painting dramatically, both speed and quality. Get one and have a play! 😀
Been airbrushing for a few years, when it comes to mixing I apply thinner to paint in the bottle and put flow improver into the cup first and backflow mix it. Thinner makes the paint dry quicker and so can dry on your needle during a session. The flow improver stops the paint from drying so quickly so helps prevents clogs. Also when cleaning I empty my pot before blasting the remainder first with water and then with cleaner and use microfibre cloths to clean out the pot. This means I am not blasting any more paint than I need too through the brush. Good video btw :)
Great video. I actually have this air brush. Love it
Lterally just got my airbrush yesterday , excellent video.
Really good Ollie! Thanks very much. I bought an airbrush years ago and have never used it but this is definitely making me think about dusting it off and taking it for a test drive! 🎨
You can do it. Get it out, set it up and give it a blast. Its the best thing I own and has helped my painting so much. 😀
Amazing Beginners Guide, this is what I was after on youtube and not many people explained what paints you can actually use specially if you have never painted or know any knowledge of painting/air brush painting. will defiantly purchase a airbrush after knowing all of these information
That so kind of you 😊 I'm glad you found it useful, and if its helped you move into the realms or airbrushing.. well, even better! Honestly, it's been the best thing for my painting, and I highly recommend it. 😀 main thing is, just practice and have fun.
Thank you for this great airbrush guide!!
One of the best beginner's videos. Straight to the point with all the most important details. Great!
Thank you so much, I'm glad you found it useful! 😀
Excellent content. Thank you. Just unpacked my air brush.
I have seen a ton of air brush tutorials and I gotta say this is the best one. Thank you!
Ah thanks so much! 😀 I hope you've found it useful.
Great tips, great delivery
I got a airbrush for Xmas and have watched loads of videos on how to use it effectively, none of which have instilled me as a newbie to the tool with much confidence in using it right, more more accurately, how to fix my errors in using it. This video has helped where those others have not, I feel I know what to do differently when using it in the future, thank you so much! 👍
Oh amazing. 😊 Get stuck in and give it a go.. you'll figure out pretty quick. If you're stuck, can always drop me a message
Just got my max3 as the first airbrush and your concise, simple advice is sure to help me get going! Thanks!
Ah, amazing! You'll love it, honestly 😀 glad I could help
@@BroadswordWargaming thanks ... Getting into Adeptus Titanicus (and possibly Gamma Wolves) with its bigger models meant I finally bit the bullet but looking at all the beginner how-tos seems like most of the reasons people tend to avoid airbrushing really are a bit overblown.
Great vid for people who want to start with airbrushing. Only one 'key' thing is missing in my oppinion, something that could frustrate starting people and toss the airbrush aside after a short time: Dry-Tip! One thing to prevent this you mentioned in part 7, small motions of paint, but the big thing here is the technic: blow-spray-blow, thats why they are called a dual-action airbrush. You start with blowing clean air, pull the trigger to control the paint and end with blowing clean air. this way the tip wont clogged that fast. And this gives you way more control over the paint. I see a lot of professional miniature painters do this wrong.. I couldn't see it in your vid, but you seem to do it right. This was the biggest tip I got from a professional (industrial) airbrusher.
Keep it up and happy painting!!!
Yes thats a valid point and a useful tip, well said. I do exactly what you do. 😀
If I worry about clogging, I also blast (on full) a bit of paint through, intermittently. Just keep the paint moving and don't let it settle.
The other handy thing about 'blow paint blow", is you don't get a spatter of paint hit your model. 😀
Well put sir.
Hi, thanks for this guide. Ordered mine.
Oh brilliant! Welcome to the gang. 😀
Awesome beginners guide! I feel so much more confident going into painting now.
Amazing! So glad you found it useful 😊 I'm glad people are finding the confidence to just get stuck in! 😀
Yes! I’m looking at getting an airbrush this year and one of the things I’ve been worried about is the cleaning part. This video has set my mind at ease, looks simple enough. Cheers dude!
Glad I could help man!
The needle and the nozzle are the only parts you really need to worry about. Also don't use solvents or things like windex glass cleaner to clean out ur brush. They work but they will mess up/eat the seals and corrode the inside.
For someone who just recently started using one, this is a fairly perfect intro to airbrushing for tabletop gamers/painters imo. Super well done!
Aw, thanks so much! I've watched good few of your videos, so I really appreciate it. 😀
Thanks great video, Much appreciated!
Only thing I did miss a bit was the PSI adjustments, it might help lowering the PSI if you are moving closer with airbrush to avoid splattering, and vice versa improve psi when moving further away to get larger surfaces. I'm getting a 0.5 needle airbrush and according to several yt reviews it does the job very well on small things also.
Great video...just bought my first airbrush kit..the Iwata Neo CN...
Ah nice, good bit of kit that. 😀 Have fun and get stuck in.
Thanks for the info.
Good video! Would be great if also include examples of what to do if one messes up badly - what to do right afterwards or correct or what not to do to correct. Perhaps show how to strip all the paint and start over.
Really good video. I see this as the next logical step in my hobby journey and this video really helped out. Cheers!
Glad you found it helpful! 😀 Do it, get an airbrush (even a cheap one) and give it a go. Its my main recommendation these days.
Great video!
Thanks, very informative!
You're welcome. 😀
Useful video! Thanks! :)
Yess thank you, I've been wanting to maybe start airbrushing!
You should! 😀
Outstanding video! That helped me a lot
Thank you! I'm glad you found it useful. 😀
Found the grey version of the airbrush you used on ebay for £148 - 50 cheaper so happy. I can live without an orange compressor! Thank you for this, it has given me the courage to jump in feet first.
Best airbrush guide for beginners out there!
Thank you so very much. If it helps people to improve or try, im happy. 😀
short and effective, i like video like this, thanks man !!
You're welcome 😀
Between your instagram and this I feel you are consistently pursading me to get an air brush!!!!
Haha. You'd think I'd sort some commission out 😅😅
I've use an airbrush for around 5 years now it a great tool, my best tip is always keep the tip clean .......one of the most common problems is clogging which happens on the needle tip itself not within the cup as paint dries in micro layers during use.....get yourself a soft toothbrush ( you can even cut the bristles down to around 5mm to make it more effective) dip it into a glass of water and move your airbrush tip in a circular motion against the bristles, you can do this quite vigorously without fear of bending the needle once your confidence builds. This will solve 90 percent of your issues as long as you thin your paint to the right consistency. Also get a couple of water bottles the ones with the long curved spout you can jet water through the airbrush flushing it out also easier to use than a cup. 👍🏻👍🏻👍🏻
Agreed. Keeping the tip clean is so important! That's where people normally have issues. 😀 Good advice.
The only time my airbrush was that clean was out of the box. Love using it for everything.
One thing I learned: using water to start the cleanup process. I've been using straight cleaner. This has cut my cleaning time in half and I now use less cleaner as well. Thanks!
Excellent! If people take even one thing away, that's awesome. Keep at it, you'll get there. 😀😀
really useful man, subscribed
Thanks so much!
Instead of using those twisted metal brushes to clean the airbrush, which I found create tiny scratches, I use interdental cleaners. they look almost the same and also come in different sizes, they're cheaper, do the same job and cant scratch the airbrush cos there no metal in them
Really informative video cheers Olly!
Can you do a video on how to motivate yourself to finish a project? I have so many started and none finished... 🤦♂️
Really helpful video. I'm just getting into airbrushing and found this really helpful. Many thanks :-)
Ah thanks so much, I'm glad you've found it useful. 😊 Just wanted to help dispel some myths about it.
Nice intro to airbrushes and helping to reassure those new to airbrushing. The only thing I would suggest users consider carefully is the practice of "backwashing". In the middle of airbrushes are typically a seal or set of seals which can be affected by backwashing. The air really should only flow the one way (from the air source to the needle and forward). The back pressure created by closing off the end of the airbrush can push the seal(s) in the middle of the airbrush back slightly which can then lead to paint creeping back along the needle towards the trigger. This might ultimately result in poorer performance of the airbrush. If this happens with beginners they might not have the understand of what may have caused this loss in performance and feel disheartened. Airbrushing can be a lot of fun and I thank you for helping reassure those thinking about taking the plunge.
Never enough "how to" vids on an airbrush. With the cheapo £40 versions you can get on Amazon and Ebay now there is no excuse not to have a crack. Sure the compressor isn't amazing but does the job! Also, you can polish up the needles that come with it and they are pretty damn good. I would note that the cheap compressors cap out at low/mid 20 PSI so are harder to clean when you just want to dump in some cleaner and blast it out at a high PSI. Still, for money you can't beat it.
I've heard good things about that Sparmax 4 airbrush. It's well priced also. I learnt the basics on a cheap one from China which I still use today and then splashed out on top end Iwata Eclipse and a H&S Infinity CR Plus (for slightly better control / precision). So much STILL left to learn with airbrushing though, would love to be a true aribrush artist to say do proper blends - i think some refer to it as 'modulation'. this video gave me the idea of periodically getting an rubbish old brush, dipping it in isopropyl periodically and then applying it to the 'NOZZLE' area periodically to prevent blocking. I always backflow when I first add paint / water / medium to mix it up and then the airbrush is ready to go. My cheap airbrush from China is the go to for varnishing as if you are not quick with varnishing and allow the varnish to dry in the airbrush by not cleaning it before it set within the airbrush then it can wreck your airbrush and be tough to clean. So in a way my cheap airbrush is just as essential as my more expensive ones and don't regret buying it. I love China as for the hobby it provides you with quite a few hobby options that you won't easily find in Europe / U.S. .. e.g. I'm printing out decals which are white, a laser printer cannot print white, a German company is the only one that does a white laser printer cartridge for laser printers that I know of which is very expensive but Aliexpress has a seller in China that sells refill kits for the cartridge which makes the process cheaper in the long run (refill backs of white waxy powder, a tool for making a hole in the old white cartridge and chips which reset the printer count on the cartridge) - all good stuff.
I'm all for getting a cheap airbrush and learning, its a exactly what I did. I spent about 18 months with a £40 set, and I've achieved alot with it. I do enjoy the sparmax, and there is a noticeable difference (and its not a high end airbrush), so I'm glad I learned on a China one. 😀
@@BroadswordWargaming and Dave Dogge: I want to get my 11 year old grandson a Cheapo airbrush to cut his teeth on. Would you suggest a single or a double action? I have him building WW-2 airplane models at the present. Any help is greatly appreciated. Kind regards, Bruce
Thank you Olly! I've been thinking about getting an airbrush as of late and this seems like a good starter guide.
I'm still going to check Vince Venturella's channel(his channel series of "Hobby Cheating" is my go to for learning how to deal with many things and learn new to me painting techniques) to see if he also has a guide on it as well. But now I feel less obligated to ask me about making a airbrush 101 video if he doesn't have one already. I've just been lazy and too busy with work currently for searching his videos on this topic.
Thank you buddy my 1st air brush will be here soon and this video has answered all my questions
Aw amazing man. Keep at it, and keep pumping out those videos. 😀
Thanks buddy I have been busy like a bee lol
Very helpfull. Thank's brother 🤝
You're more than welcome! 😀
Nice video dude. Hopefully this will give a lot of people a helping hand when it comes to airbrushing
Ah thanks so much! If people can use this to move forward and give airbrushing a go, im happy. 😀
Eu comprei 4 aerografo. Estou no aguardo, ansioso louco para testá-lo rs.
I’d like to learn more color building. Painting with built up layers of thinner color. My big mistake was using too heavy a paint mix. Thanks
Fantastic video! New subscriber here cant wait to watch some more vids. I just got an Iwata Eclipse. I think I’m going too heavy on the paint and trigger, I’m getting a lot of clogged detail and the paint looks wet on the model when I’m spraying. I’ve tried lower and higher pressure and more and less thinner. It’s fun figuring it all out tho!
Cheers Olly, great video! In honour of this I ordered some more Vallejo Air paints. 😁
Good man!
Ultrasonic cleaner will do amazing at cleaning the brush. I use glass pipettes and it cleans them almost instantly. I use alcohol in it hasn't damaged anything, it's been 2 years now. Also at the end you can polish the needle with metal polish, it leaves the needle like a mirror, super smooth and paint will flow through it like the first time you used it.
Great video and great brush and compressor kit from sparmax.
One piece of advice would be to not ‘backwash’ with your finger. You can see in one part that there are moisture bubbles leaking out from the thread seals on the brush. Backwashing can weaken those seals and also force moisture down the hose and into the compressor. It’s a lot easier to just have some plastic or metal mixing cups handy to pre-mix your paint and check the consistency before pouring it into the gravity feed hopper.
I have an airbrush (a cheap one from amazon) haven't used it yet but this video gives me more confidence. Cheers olly 👍
Thats all you need man! I've only just switched over from my amazon cheap one.. it was great, lasted more than 18 months. Learned a lot on it. 😀 Give it a go.
Start with priming it's a nice way to get started
@@tonyflores5515 I agree with this. 😀 Keep it simple.
Top video buddy 👌 biggest problem I've found using mine is the paint has clogged up the end of the needle housing ( the brass part ) and have had to scrap it out , major pain but my own fault . I probably should but when I deep clean after using it I tend to us methylated spirit after .
Thanks for the video Olly. I took your advice about getting the airbrush, but this helps with a bunch of questions I had. Great for beginners like me!
Aw no worries sir! Im glad you found it useful. 😀
Great video! Loved that you could see the size and shape of spray. Did you list anywhere what model compressor and airbrush it was?
I’ve had an airbrush for a few years, a Paasche, and it was great for priming. Then I got an Iwata HP-CS, and it’s terrible. I can’t prime like I did with the other one, it just sorta little bits at a time. I completely disassemble after each color. That’s the only way I’ve found to prevent clogging at the tip. If you don’t do that you will clog and ruin your mini and waste time cleaning. Taking it all apart, and using the cleaning kit and lubrication, that’s really the only way I’ve found to get it to work.
Thanks for this video :-) This seems to be a nice starter set for me. Could you please tell me how loud this compressor is?
Thanx for the video. Somebody stole my compressor out of my garage. But I have an iwata hpc plus, and one got a chance to use my airbrush for a short while. The air came out all funny like the motor of the compressor. So I never had a good smooth finish like yours.
Ah glad you liked the video. No kidding, I have just got the iwata hpc plus too! It's a nice bit of kit, very fancy.
What compressor were you using? Was it the airflow that was the problem, or was the airbrush spitting and being inconsistent? A compressor shouldn't have that issue (unless you've got a damaged air cable), so it could be the paint thickness in the brush being too thick. 👍
Looking at buying an airbrush and once again your video helps me enormous, still a bit scared tho ;)
You can do it! I was scared for about 6 months.. now it's my favourite hobby tool. Just give it a go, you'll only get better. 💪
Damn... I missed airbrushing. My first airbrush was a single-action Badger, before moving onto double-actions. I haven't used them for decades. It was the start of me rendering '3D' illustrations. Now, it is much easier to create 3D rendering / illustrations using 3D Softwares. But airbrushing has a more craft-like and artistic feel to the experience.
Great video, one step I’d add is to always pull the needle out from the front to prevent dragging paint through the trigger mechanism 😃
You know, I've never thought of that! What a good idea. 😊 Thanks for that.
Great video - any tips on PSI?
Now your painting! Good investment !
Can I use thinned acrylic pain in the airbrush? This is so I can do some domestic touch up’s around the house where a paint brush is not practical.
This may have been mentioned before but a dust mask will not filter out paint fumes, it may catch some paint particles but that is about it. The most comman masks that can do this are reusable half masks with replaceable filters or full face masks. You used to be able to get activated carbon ffp3 dispoalbe masks however these are expensive and will not last as a long as a halfmask.
Thank You , Bs Wg .
Cheers Oli' , has to say you sounded like them old TV info-verts , haha , nice one ! :-) .
Haha, that's probably a good thing.. I think 🤔 🤣
Yep , ifn I ever get one of them thare airbrush, I will watch this again , cheers
:-) .
@@loupiscanis9449 "we don't need none of them fancy airbrushes round 'ere" 🤣🤣
@@BroadswordWargaming Nope just a stick wif a bit of fluff stuck on the end , and maybe a straw as well, Sorted ! :-) .
Another thing I would recommend is to keep a glass of water handy so that if you're not using your airbrush for a little bit you can dunk it in the water so that any paint that's still in there will not dry up and clog up the airbrush. This is a great thing to do also if you don't want to do a deep cleaning, after you clean the airbrush without taking it apart put it in the water just in case there are still little bits of paint in it. This will keep that paint softened up so it won't dry up and clog up the airbrush.
What a handy tip, I like it. Thanks. 😀
Hi, what is the black paint you used for the Astarte at PAINTING A MODEL PART 6 ?? 9:26 Where can I get that paint ?
OK Olly, I’m done. You had me with this one! I switch for the airbrush and stop with 1-these stupid spray cans and 2- approximative and boring as hell brush bases. Thank you for having fear-busted the airbrush for me, as this is the only realistic way to beat this pile of shame and really enjoy it. 🙏
Haha, sorry! 🤣 Honestly though, the airbrush is such a good tool for smashing models out. They'll be smooth and have more transition, for so little work.
Glad you found the video useful 😊
I need a pump like the Arism , wish I could get one sent to me
What kind of paint thinner do you recommend for acrylic paints??
Ofc it was given
Is it possible to just use acrylic paint and water in the airbrush?
What pressure do you set the regulator to?
I subscribed
Ah thanks very much 😊
I’m relatively new to the hobby, and was wondering what the best way to get that dark outline around the space marine eyes would be?
A bit of diluted Nuln oil usually does the trick if you don’t want to try some black lining which is more ardous but the results are more pronounced!
@@nl3869 thanks for the tips, another thing is I’m doing ravenguard currently so the armor is black obviously, so do you think it’s even worth the time to try and darken the outline? Lol
Maybe a recommendation on the psi that should be used
it depends. Thick paint mixes require higher PSI but you need to be further back from the model or it will splatter. Thin mixes allow you to get closer for fine detail work, as long as you drop the PSI
I work between 15-20 psi depending on paint thickness
"...going full Duncan..." 😁😁
Great video, I’ve been wanting to try using an airbrush for a while. Out of interest, how loud is the compressor?
Its not too bad, quieter than my cheap one. f you're on the phone to someone, they won't hear it.. so it's good. I have mine running alot, in the kitchen, and you can't really hear it in the next room. 😀
@@BroadswordWargaming that’s great! I have a baby so he’s asleep a lot during the day and noise is always an issue. Thanks very much for the reply.
@@Swampsong117 ive got a 7 year old in the room above the kitchen, she never wakes up (at least not from the airbrush). Get stuck in. If it is too loud, just pad it out a little. Honestly, it's the best purchase I ever made. 💪
@@BroadswordWargaming I’m looking at the website you mentioned at the beginning of the video as we speak! Can’t afford it right now but it’s something I’m going to do ASAP.
Regarding sculptures made from Polymer clay; can I use paint thinner with acrylics, has anyone any experience using them on baked clay materials?
what type of compressor did you use?
how often do you need to clean it like shown? every time you shift paint or just after an ended session?
I normally run water and a bit of cleaner through it after every paint (which is why painting units is better than an individual model), and then at the end of a session, give it a deeper clean. 🙂
what's your view on portable compressors? the kind that are attached to the sprayer as a small tank
I dont have any personal experience with them, thay said, I have my doubts about them. I'd worry the airpressure would be inconsistent and not sure how good they'd be.
If you're after a travel set, something like this might be better, as its tiny anyway
th-cam.com/video/-W9MGYa8FuQ/w-d-xo.html
It would be interesting to see just how well they work. 🤔
I just started airbrushing and I used regular paint to airbrush my plush. They turned out VERY dry! What paint is best to use on plushies when airbrushing them that won’t make their fur all dried up?
Your explanation is so detailed and excellent! But I noticed your compressor, is it a corded one? And I think maybe the cordless one is much convenient! Our airbrush compressor is very good and can be connected with a hose. Do you have any interest?
I have never played with the cordless compressors before, although have seen then advertised. I'd be interested to see how they compare.
@@BroadswordWargaming well，we are manufacturer of airbrush in China. If you’re interested, you can contact me for the cordless airbrush.