Pixel Smart Receiver (Controller) Build

Buying pre-built smart receivers can be expensive, sometimes running $500 or more. But with an hour of your time and a little bit of effort, you can build your own smart receivers and save a bunch of money in the process. This build should run $135 when broken out by box. If you don't have some of the items on hand already such as drill bits or bulk wire, it may be a little more of an investment up front, but will allow you to then build multiple boxes cheaply going forward.
Here are the components of this build:
You will need the Hewlett Packard (HP) DPS-1200FB power supply in particular. Can generally find these on Ebay for about $22
www.parallelmi... - $15
kulplights.com... - $30
pixelcontrolle... - $15
www.amazon.com... - Optional Box at $32
www.amazon.com... - I got this box on sale for $25 but adding the vent brings this box to $32
www.amazon.com... - $9 (5 boxes worth of glands)
www.amazon.com... - $25 (5 boxes worth of glands)
blinkypixels.c... - $1 each
www.wiredwatts... - $1.25
www.wiredwatts... - $7 but may not be needed if you purchase the box with pre-existing vents
www.wiredwatts... - $3.20
One-Time Purchase Items (if needed):
www.amazon.com... - $10 one-time purchase
www.amazon.com... - $16 one-time purchase
www.amazon.com... - $16 one-time purchase
www.homedepot.... - $11 one-time purchase
www.amazon.com... - $10 one-time purchase
www.amazon.com... - $19 one-time purchase
#lightshow
#pixels
#christmaslights