Very clean wiring job.. doing more wattes than my wind turbine...solar is much cheaper in watts per dollar. But it is fun to play with the stuff. I totally get it.
Hi. Very interesting and looks like a great set up. I am planning to use 2 x hoverboard rotors on a river hydro system. Did you feed 2 wires separately from the rotors to the control or joined them at the top of the turbine? Was there a improvement in generated power?
Hi, yes, in the video you can see that the 6 wires comes to the two three phase bridge rectifiers then goes to the lever switch that you can select between free spin, parallel and serie, then out to the dump load controller and to the batteries. Yes, the improvements is the 80% more power but i think tha the blades must to be a little bit bigger.
@@apbtmaxx es necesario ? Me dijiste la otra vez que si pongo una fuente dc dc que eleve el voltaje si es por debajo de 12v y que lo baje cuando pasa entiendo que la elevacion vendra de los amperios y se frenara , crees que si le pongo un limite bajo de amperios tambien frenara mucho ? Por ejemplo si le pongo uno que solo baje a 13V pero limitada a unos 3A tambien se frena ? La verdad es que no se como hacerlo , tengo las cosas pero estoy en un lio
Hi, depending the charge controller setting, in this video was in 15 limits to start to dump toward bulbs, and the equation is volt x amp = watts, when the current start to flow to the battery, the multimetre start show current, watts and power.
No wattimetro digital está marcando 7650 W, significa que você já gerou quanta energia? Seria 7.650 kw/h? Quantos kw/h gera de energia no mês? Obrigado.
How much volt ur getting for 290 rpm? But trust me 290 or more is worst speed. I have solution to get 24volt and 100+watt at just speed of 160+ with some changes in windings.
you must be an electrician because your setup is way too good, this is amazing..
Thaks a lot!!! No no, I'm just an electronics fan and all those stuffs
Very clean wiring job.. doing more wattes than my wind turbine...solar is much cheaper in watts per dollar. But it is fun to play with the stuff. I totally get it.
Thanks for the tips!
Sir You have got my respect. Outstanding job.
Thanks a lot
4 bulbs 😲😲😲😲 woooowww
Excelente instalacion! Muy prolijo.
Muchas gracias!
looks realy great system and turbine works awesome
Thank you very much!!
Great job, would you make a video about how you made that charge controller with the dump load?
thanks!
Hi, thaks! I coppied from this channel: th-cam.com/video/8DhV4M7IujU/w-d-xo.html
i love it! i hope to do the same some day but i need a house first lol
You can do it!
Hi. Very interesting and looks like a great set up.
I am planning to use 2 x hoverboard rotors on a river hydro system. Did you feed 2 wires separately from the rotors to the control or joined them at the top of the turbine? Was there a improvement in generated power?
Hi, yes, in the video you can see that the 6 wires comes to the two three phase bridge rectifiers then goes to the lever switch that you can select between free spin, parallel and serie, then out to the dump load controller and to the batteries. Yes, the improvements is the 80% more power but i think tha the blades must to be a little bit bigger.
@@apbtmaxx Thanks for the info. I'll be putting my project on TH-cam when I've built it.
@@plan9channel7 you're welcome!! I hope so!
I set up a similar one, but I want to use it on the grid, do you have any tips to teach me?
Hi, sorry, I forgot you, no, i think to grid tie type connection the only that you must to do is connect an on grid inverter, and then to on grid net
Wzorowa instalacja piękne wykonanie. Tylko niech powiewa!!!
Zastanawiam się , po co te wielkie kondensatory elektrolityczne?
In english please
Hi, can you type in spanish or English?
Ow, now I can understand, those 2 electrolytic capacitors works as filters, getting soft the dc ripple
Las 4 bombillas para que son ? Sirven para algo ?
Hola, son la derivación de energia excedente a la vez que hace de freno automático.
@@apbtmaxx es necesario ? Me dijiste la otra vez que si pongo una fuente dc dc que eleve el voltaje si es por debajo de 12v y que lo baje cuando pasa entiendo que la elevacion vendra de los amperios y se frenara , crees que si le pongo un limite bajo de amperios tambien frenara mucho ? Por ejemplo si le pongo uno que solo baje a 13V pero limitada a unos 3A tambien se frena ? La verdad es que no se como hacerlo , tengo las cosas pero estoy en un lio
Hola ! Que regulador de carga usas ? Tu instalacion es de lo mejor , impresionante , me gustaria tener algo asi
Hola, es un regulador casero a base de mosfets de potencia, totalmente regulable en tensión.
@@apbtmaxx vaya me encantaria tener algo asi tan monitoreado pero no creo que se hacerlo
@@tibib4029 yo tampoco lo sabía pero me gusta la electrónica y pude lograrlo con dedicación hacer el controlador
What are the capacitors for?
The big capacitors are for smoothing the direct current after rectification
@@apbtmaxx how do you know what size to use?
@@VroomvroomNY about voltage, it must be at least the double, and about the microfarad must to be the bigger that you can put them
estes dois capacitores, como foi feita a ligação?
Olá, as ligações foi em paralelo cada uma as saídas ao um ponte rectificador cada um
@@apbtmaxx sai o finio negativo da ponte retificadora e liga no capacitor, o positivo mesma coisa? dai sai para o controlador de carga?
@@joaoalmeida1072 somente um de os capacitores estão invertido sua polaridade, somente põe esso
@@apbtmaxx I did not understand
@@joaoalmeida1072 + com + e - com -
Hello. It seems to me, that above 15 volts the energy is converted into amps. How did you do it? which device did you use?
Hi, depending the charge controller setting, in this video was in 15 limits to start to dump toward bulbs, and the equation is volt x amp = watts, when the current start to flow to the battery, the multimetre start show current, watts and power.
montei um semelhante, porem quero usar on grid, voce teria alguma dica para me ensinar?
Olá, eu não tengo,
No wattimetro digital está marcando 7650 W, significa que você já gerou quanta energia? Seria 7.650 kw/h? Quantos kw/h gera de energia no mês? Obrigado.
Sem, agora o gerador gerou mais do 10 kw/h, pero no sempre esta gerando, a maior parte do tempo não esta em uso
❤🎉
Your finishing work very good
How much volt ur getting for 290 rpm?
But trust me 290 or more is worst speed.
I have solution to get 24volt and 100+watt at just speed of 160+ with some changes in windings.
In parallel about 25 Volts unload, in serie the double.
@@apbtmaxx yeah but getting speed 250+is rare event na! So tatal energy production per day is less
@@apbtmaxx ur hoverboard motor is 36 volt or 48volt?
@@dayanandkasle5146 its 36 volt as motor, few winds around here
@@apbtmaxx then how ur getting 25 volt? for 25volt u need 550+speed
Где твоя аккумулятор? Я не вижу аккумулятор
Its right on the floor