I successfully completed the hard mod on a cdma A1403 iPad 3. I'm pretty sure the r1204 did not exist on this model as I was unable to see any resistor in its place. The r1205 did exist and I removed it with a needle and a hot air gun. I advise anybody not confident in their skills to not bother trying this mod as it is very difficult. Taking the glass off, the first step, is very challenging without chipping the paint or breaking it. The resistors are about the size of a comma , good luck to those who try!!!!!!!! Thank you for the video!
Milos Cvetkovic I restored 9.3.5 oficcial of itunes because Update option wasn't in iTunes after put of the resistor and was my only option. Thanks again I'm writing now in my Ipad. Reggards
DIMAS BALLESTER Great to hear that. Did itunes recognized it as ipad wifi or cellular? Did it show some erors while restoring or made problems? Does it still have sn or you had to put it manualy?
I never tried to remove the 3G board, you must check if there is anyting that makes the main logic board work in conjuction with the 3G board. You can try to detach and test but make sure you can re-attach in case it does't work properly.
i forgot the user and password of my but the problem when i open it i found it removed already . but it need user and password what i do>??? re install again?
Please, i need your help! i follow your process, but when i try restor my ipad appear this message: "The iPad "iPad" could not be restored because the firmware file is not compatible"
it's hard to be recording every single proccess. plus I don't have microscope to record the removal of a flea size resistor. But for an open minded person my babbling would be enough to succeed. And for a "free" guide an horrible video is enough.
![“อ.เบียร์ คนตื่นธรรม” มาตามคำเรียกร้อง แหกศาสตร์ฮวงจุ้ย เตือนสติอย่างมงาย | แฉ 7 พ.ย. 67 [1/3]](http://i.ytimg.com/vi/5fc4S3xBNfc/mqdefault.jpg)
Thank you for the video, it brought my old iPad back to life. Magnifying glass, hair dryer and a needle!
I successfully completed the hard mod on a cdma A1403 iPad 3. I'm pretty sure the r1204 did not exist on this model as I was unable to see any resistor in its place. The r1205 did exist and I removed it with a needle and a hot air gun. I advise anybody not confident in their skills to not bother trying this mod as it is very difficult. Taking the glass off, the first step, is very challenging without chipping the paint or breaking it. The resistors are about the size of a comma , good luck to those who try!!!!!!!! Thank you for the video!
Great video, and how about a1416? what resistance should I remove?
+Hamad Mutawa it won't work because your ipad is wifi model. it only works with 3g model.
It's awesome, thanks a lot, Is working in a ipad 3 a1430, I put of the resistor and restore with Itunes and boila, it's alive again. Thanks dude.
DIMAS BALLESTER which ipsw you restored?
Milos Cvetkovic I restored 9.3.5 oficcial of itunes because Update option wasn't in iTunes after put of the resistor and was my only option. Thanks again I'm writing now in my Ipad. Reggards
DIMAS BALLESTER Great to hear that. Did itunes recognized it as ipad wifi or cellular? Did it show some erors while restoring or made problems? Does it still have sn or you had to put it manualy?
plz can u provide lik for ipsw a1430 wifi version ?
which resistors for A1416?
Thanks For your Work man, and continue, i saw in your tuto, a little shematic showing the number of resistors, can we use it for models shown ??
sorry do i need to put back resistor or keep it removed Thanks
Thanks man! My ipad 3 working!!
very good Explained , that's how I like Tutorials
A1430 works, but will not facetime?
sorry forr last comments but its my fult
now its working 1000000% thanks
You are AMAZING!!! Its works.
Me funciono este man si sabe prove con la A1430 3g lo único es que solo queda con wifi el 3g ya no muchas gracias DoSomething
what about iphone 5s ?is there a hardmod method
Do these chips have to be programmed before you solder them on?
no, no, no those are resistors, and either you need to remove one or jump another.
for iPad 3 model A1430 after removing the resistance .. the sim card will operate or not ??
+mostafa ali Not anymore.
+mostafa ali no it will not.
After do that, can I remove 3g board? I asking you cause I have a problem with the flat cable that connects the 3g board to the logic board.
I never tried to remove the 3G board, you must check if there is anyting that makes the main logic board work in conjuction with the 3G board. You can try to detach and test but make sure you can re-attach in case it does't work properly.
I´ll try. Thanks
what kind of software do I need to download that will move the iPad from black screen. please help me
should work gsm (SIM) network after fix this?
+Ashraful Islam NO
This works wow Greatstuff...Thanks man
Quick Quick Quick Quick , Bypass icloud lock on any device by going to unlockicloud24 .com. It'll get took offline !!
i forgot the user and password of my but the problem when i open it i found it removed already . but it need user and password what i do>??? re install again?
can you tell me the r1204 in the ipad 3 model a1416 ?
and on the model 1599 which resistors should I remove?
Please, i need your help!
i follow your process, but when i try restor my ipad appear this message:
"The iPad "iPad" could not be restored because the firmware file is not compatible"
I hope you have done it, I been busy and away from YT, is because you need to download the "wi-fi only" version.
and what about ipads 4 wifi only?
can it work for model a1416
tnx dear bro
it;s was really good video
where can someone help me to do this I don't want to screw it up can you help ?
boa tarde, eu fiz exatamente como no video, mas meu ipad não liga mais, o itunes reconhece mas meu ipad não liga, nem no modo DFU, o que que eu faço?
Edy Ferreira achou a solucao brother ?
for a1416 it is?
model a1416 pliz out icloud
My ipad is reconized as an Iphone in itunes wont restore... did I screw up
did you make a jumper? what model is?
Stop rubbing the ipad cover like that.. You're making me feel uncomfortable
Yo pls pls answer PLS PLS PLS
CAN I DAMAGE TYE R1204 REALLY BADLY SONIT DOESNT WORK ANYMORE BECAUSE I HEATED ALOT ALOT BUT IT DONT COME OFF!!!!
how to fixing iPod touch lock iCloud?
bro..the icloud u done ipad3,1 model a1416 izit or what mdel?
For ipad 3,1 a1416 how?
is this possible to do on a1432 iPad mini
i can provide proof that is not stolen
cool~~!! how about a1416? what resistance should I remove? :) Plzzzz~~~자세히 보기 간략히
out identific resistan
work for ios 10 plz?
any solution for ipad A1476 ?
hi i can unlock your ipad contact me en whatsapp +212661441622
Thanks
hi i need unlock iphone 6s please
Bro how to unlock
A1403
resistan ipad 3 3generation out icloud pliz!!!!!
frimware link plz
does it works on A1430 model ipad plz reply
He made this video using model A1430
Has anyone clue of A1550 ipad mini 4
hi i can unlock your ipad contact me en whatsapp +212661441622
It was so easy to icloud unlock my iphone from unlockicloud24 .com
would you like to fix mine? I will pay for it. just let me know i will send to you. if you need my contact please let me know. thanks
error 3194 its my problem.pls help
+Cosmin Mirzescu sorry for my delay the 1394 is because itunes don't accept old firmware.
get on with it all you are doing is talking
have a problem error (4014)
you could solve the problem?
you tolk to much
So much useless babbling. You cut out showing how its done and only show before and after but yet leave useless rambling in.
it's hard to be recording every single proccess. plus I don't have microscope to record the removal of a flea size resistor. But for an open minded person my babbling would be enough to succeed. And for a "free" guide an horrible video is enough.
***** You maybe need to put it on DFU mode and restore it again with wi-fi only ispw.
fake fake fake
my ipad s/n .........................
no firmware competible
dont do this
100% ok
ur method wrong
work to ipad 3rd generation model A1416?