ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
Make current collector for battery and supercapacitors
ฝัง
- เผยแพร่เมื่อ 18 ส.ค. 2024
- In the video "Make current collector for battery" I show how you can use a conductive HDPE as current collectors in the batteries or supercapacitors.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
SUPPORT: HELP ME TO MAKE MORE INTERESTING VIDEOS
- You can make more videos possible with some Patreon donations: / cayrex2
- One time donation: paypal.me/cayrex
www.paypal.com...
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Song: Clarx & Shiah Maisel - Round n' Round [NCS Release]
Music provided by NoCopyrightSounds
Free Download/Stream: ncs.io/RoundNRound
Watch: ncs.lnk.to/Roun...
#battery #electrode #carbon #carbonbattery
For measuring conductivity of a plate, you might want to make a 1 cm copper cube that gives you consistent contact surface area.
Yes, of course. Here with this quick measuring I already get some idea if the plate will be good or not.
I 3D printed my own probe for measuring Ω/sq sized to fit nickel strips used for welding up lithium battery packs.
@@noahwiliams7214 Nice
Hey thanks for showing very unique method for welding these materials together.
May I find out where get a hold of just the felt .
Is this the PAN fiber carbon felt, or rayon based.
Hi! It is a PAN based carbon felt. But rayon felt will be also ok if you can get it. The PAN graphitic carbon felt you can get from ebay.
mind blown, 0.3ohm resistance from connecting not really conductive stuff with iron
👍
I have been trying to buy some conductive hdpe but unable to find a supplier.
@@nlabanokYou can buy it from china, but I found info regarding the conductivity a bit dubious.
The conductivity of HDPE is in the range of 200 ohms. I also see that many companies working to go into the range of 60 ohms.
hnszhongzhneg.en.alibaba.com/
Another one will be company Caplinq,... which is awsome
@@cayrexI couldn't even get a reply from Caplinq.
super!
si on utilise un electrolyte corrosif: penses-tu que l'on puisse faire un coating protecteur sur l'aluminium? genre encre conductrice à l’époxy ou au PU pour le protéger? ou un Electroplating peut-être? mon idée est pour rester en low-cost... c'est très cher le hdpe conducteur....
merci, super vidéo comme toujours
Hello! Thank you. Yes it is posible to make some conductive coating
quelle serait la meilleure formule à ton avis?
sans trop perdre en conductivité bien sûr!
Why not using graphoil only? Graphoil seems to be inert already.
Because if the graphoil is in direct contact with electrolyte and if you use thecl charging voltage more that 1.8V then after some cycles the graphoil will expand and you will lose the conntact or it will higher the resistance. Also the graphoil alone is more fragile in the conntact area (the area where you connect a crocodile cable).
No current collector better than grafoil
First
🥇😉
Imagine if the conductive plate had a few small holes, through which the HDPE could weld to the HDPE on the other side.
That is how need to be done. But most of the time I skip that extra step (making holes to the metal plate/foil and welding two pieces of HDPE together) and I only put a HDPE on the top of metal foil and that's that,... and also works great. Fast, simple, effective.