There is a terrible expression, the one who makes the past is not terrible. But the one who makes the future is afraid. So whoever creates the past weapon is not terrible. Only the one who created the weapon of the future, which only he has, is terrible. And if he uses it, then the whole society will completely disappear. Since the weapon of the future is the weapon that can one hundred percent destroy everyone, and there are many such madmen.
Great build and instruction. You showed enough that a person could still build this without the machinery such as a long bushing for the barrel. You can build your version with this guide. 🤘
Do you sell these anywhere or all the parts once machined? I'd buy one from u in a heartbeat so cool... And I'm asking u that seriously. I don't have all the metal work machines. Lmk.. either way, very cool
si... la verdad es que el título está bastante mal. No quita que el trabajo sea grandioso, pero no creo que todos dispongan por ejemplo de un torno. Y ni que hablar de los conocimientos
Finally, a crossbow that does not drag the string across the top of the stock. Nice build. However with that low poundage, the LAST arrowhead you should have is a 3 blade. Should be a cut on contact 2 blade, if you actually want to penetrate.
This is awesome shoots out of a barrel aswell, i saw home made and then thought cool i wont need a lathe or anything big, first tool is a lathe. I want one.
Nice touch designing it to be broken down/reassembled. Just needs like a poison reservoir to tip your bolts, similar to a patchbox in the stock. Thanks for sharing.
Pas utile d'être un assassin pour réaliser de beaux objets ? Pour faire du tir et décompresser par exemple. Merci. j'aime le travail de précision qui fait appel à la patience. Pour quand la saucisse de Strasbourg qui tue ? 😍👍
Should just cut the grooves all the way, so you can still have fins on your bolts. No way they're gonna fly straight for more than 3 meters without fins.
Nun ja, wenn Jemand das Handwerk des "Feinwerktechnikers, Fachrichtung Feinmechanik" gut umsetzen kann, dann ist es eine sehr schöne Arbeit geworden, das Projekt " Armbrust eines Attentäters".! Nur bitte NIEMALS!! diese kleine, nicht gerade ungefährliche "Assassin Armbrust" gegen Menschen einsetzen!! Jedes Leben ist kostbar!! 🤫🤔... Trotzdem, Respekt, lieber Kollege "Feinmechaniker"!...😊😉
@@Guitarplayer724 I have been a mechanic all my life. From the time I was able to use tools at the age of 3, in 1963, until last year. I know how to use tools correctly. Files can't cut on a backstroke, the teeth don't face that way. I am no expert but I DO know how to use tools correctly.
@@GVBiggs524 Whether the file cuts on the backstroke was never the question. It’s your claim that it will dull the file, which just isn’t true. On the other hand, it won’t cut either, which is just a waste of energy.
Sympa ... mais au lieu d'utiliser la fraise avec outil manuel, pourquoi ne pas avoir utilisé la perceuse sensitive qui avait un plateau ? Le perçage aurait d'ailleurs pu être réalisé avec une fraise - en plusieurs passes - et pas besoin de limer pour la finition ...
Einfach eine Metallhalterung für den Planschlitten kaufen oder selbst herstellen und den Dremel dort einspannen. Dann ein Loch im Werkstück bohren für den Querschnitt, Fräser in den Dremel und in der Bohrung des Werkstücks anpassen, dann das Drehfutter festhalten und den Planschlitten drehen. Einen geraderen Schnitt bekommt man nicht hin, wie industriell.
7:32 If you had clamped the tool in your lathe and attached this milling tool to the carriage, you could have milled the spot out nicely by moving the carriage.
Hello friends. I spent a whole week making this crossbow to surprise you once again. Did I show the entire process in enough detail?
Nice job. I would like to know how you are makeing it´s string? Thx.
@@heamorhoid Thank you. Bowstring made from fishing line
Perfectly made. Salute to your patience❤❤❤❤.
There is a terrible expression, the one who makes the past is not terrible. But the one who makes the future is afraid. So whoever creates the past weapon is not terrible. Only the one who created the weapon of the future, which only he has, is terrible. And if he uses it, then the whole society will completely disappear. Since the weapon of the future is the weapon that can one hundred percent destroy everyone, and there are many such madmen.
*Hello! The process is shown well, but there are no dimensions of all the details.*
com um maquinário desse em casa dá p produzir até em série!!!!
👍когда смотришь на такое , понимаешь что не все еще потеряно в этом мире! Молодец🤝
Спасибо за поддержку дружище
Great build and instruction. You showed enough that a person could still build this without the machinery such as a long bushing for the barrel. You can build your version with this guide. 🤘
Thank you friend.
Do you sell these anywhere or all the parts once machined? I'd buy one from u in a heartbeat so cool... And I'm asking u that seriously. I don't have all the metal work machines. Lmk.. either way, very cool
Home made.......if you live in a machine shop......
Not true. Any self respecting craftsman would have a lathe, drill press and related tools.
I know right 😂
Even my dad have most of these in his bedroom lmao
This could be a James Bond piece of armour. Nicely done 👌👌
Beautiful work.
Thanks for sharing 👍
Considering the minuture size, your crossbow is well designed, well executed with excellent results. Well done Sir
Thank you
Thanks to the skillful and intelligent craftsmen who beautify life.
you're welcome
Yes this was a great video showing your professionalism. Unfortunately not everybody has your impressive craftsman know how. Thank you for your video!
Super..homemade...hab zu Hause von den Präzisionmaschinen bestimmt noch ein paar rumliegen...:)
Absolutely amazing! A true work of beauty, thank you.
Wow!! Cool! 👏👏👏
you're welcome
Sitting here with a cold snap outside, got my hot drink and Really loving this!! Great job indeed
Thank you friend.
Nice work! Just the thing to implement regime change when the dictator is a budgie or a hamster. ;)
Legal, bem caseira, todos tem um torno em casa kkkk
E que torno! 😅🤣😂
This is some James Bond stuff here
Amazing work! 👍🏻👍🏻
I just love how I will be able to get the same result following much simpler methods and using simpler everyman's tools.
I think this won't be a problem.
Was für ein hübsches Teil, alle Achtung.
Thank you
There’s something very therapeutic about watching metal lathe machines! 👍🏻💕🤗
Sir, you are a very good craftsman. I can see where you could use a milling machine, especially where you slotted the body by drilling and filing.
Many thanks friend. I don't have a milling machine. Haven't worked on the machine yet. but i plan to buy it
Wow, nicely crafted.
Thank you friend.
Beautiful work man
Nice work.👊
Thanks a lot
Please tell me how much such a crossbow costs and whether it is possible to place an order. Thank you!
Unfortunately I don't sell anything now. Maybe in the future.
WOW - an excellent job! Thank you so much for this very interesting video.
thank you friend
Impressive. What was the total cost and hours spent on making this?
Would love to buy one of these! Very cool.
Thank you for your interest. this job took 3 evenings. Unfortunately, I'm not selling anything right now. possibly in the future
Esas no son herramientas caseras que cualquiera pueda tener a disposición.
Esto es a nivel industrial!
si... la verdad es que el título está bastante mal. No quita que el trabajo sea grandioso, pero no creo que todos dispongan por ejemplo de un torno. Y ni que hablar de los conocimientos
물괴기 잡으면 끝내 주겐네요
넘 잘만드네요~~♡
Thank you friend.
Sangat menginspirasi dan pekerjaan yg menyenangkan 😊
Thanks a lot
갖고싶어요
Please tell me how to cut those band saw blade without damaging them ?
I'm trying to build a crossbow after learning from you.
I use a dremel
Far from homemade great workmanship beautiful crossbow
My friend, do you happen to have any drawings or diagrams for a more detailed understanding? I would like to reproduce such a magnificent crossbow!
Thank you very much for your interest. Unfortunately I didn't make any drawings.
Magnífico trabalho, muito bom trabalho!! ( Magnifique Job, much good Job!! ) 🇧🇷👌✌️✌️👍👏👏👏👏👏❤️
👍You do some very cool tricks on that Lathe!!!. 🤷I just know if I tried them! Bits would be flying across the Workshop!😂
สวยงามมาก และน่าติดตามมากครับ
Thank you friend for your support
Finally, a crossbow that does not drag the string across the top of the stock. Nice build. However with that low poundage, the LAST arrowhead you should have is a 3 blade. Should be a cut on contact 2 blade, if you actually want to penetrate.
Дивлюся ваш канал з самого початку, дуже цікаві та класні роботи🎉
Огромное спасибо
звернув увагу, що в нього токарний станок зроблений в лнр?))
@@jozinsbazin Ты не внимательно смотрел. Патрон сделан а ПНР. польская народная республика
@@serengyarchery согласен, спасибо за ответ
Muy linda la ballesta casera... el único problema es que no tendría un torno " Casero " jajajajaja el resto genial ! =)
🤣🤣 lo primero que salta a la vista es ese pequeño detalle... nada menos que un torno...
This is awesome shoots out of a barrel aswell, i saw home made and then thought cool i wont need a lathe or anything big, first tool is a lathe. I want one.
Thank you
Perfect job master👍👏👏🙌
Thanks a lot
Wonderful work ! I want one !
Good job Sir wonderful 👍
One wonderful job Sir 👍
Достойно арсенала Джеймса Бонда :-)) 😎👍
Спасибо. Он бы оценил😁
@@serengyarchery 007 🕴️🕵️
Que bien k es casero,, al rato lo hago ya k todos tenemos un torno y taladro industrial en casa
Who wants to find the opportunity. who does not want, he is looking for a reason
Very Educational! Congratulations!
Thanks a lot
The bowstring is made of this material?
braided fishing thread
Très joli ton petit jouet !!! 😃
Félicitations .👍👍👍
That's just too amazing
Thank you friend.
👏👏👏👍 bravo süper👏👏👏
Thanks you Mazimg ❤❤❤❤❤❤
nice havin' a lathe.
Круто!!! Бесподобный самострел!!!😉🙂☺😀😄🙄💪👌👏🖒👍🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺💓💓💓💓💓💓
Спасибо
Nice touch designing it to be broken down/reassembled. Just needs like a poison reservoir to tip your bolts, similar to a patchbox in the stock. Thanks for sharing.
Krásná práce 👍👌👏🍀😉🥂
👍
Are you selling these? I would love to purchase 2
Unfortunately I don't sell anything right now. possibly in the future
interesting take on this tube
👍
선반 천재네요...
magnifique et formidable travail !!
thank you friend
Pas utile d'être un assassin pour réaliser de beaux objets ?
Pour faire du tir et décompresser par exemple.
Merci. j'aime le travail de précision qui fait appel à la patience.
Pour quand la saucisse de Strasbourg qui tue ? 😍👍
Thank you friend for your support
0:06 nice air rifle shot:))
Should just cut the grooves all the way, so you can still have fins on your bolts. No way they're gonna fly straight for more than 3 meters without fins.
Nice work.
thank you friend
Well done.
Nun ja, wenn Jemand das Handwerk des "Feinwerktechnikers, Fachrichtung Feinmechanik" gut umsetzen kann, dann ist es eine sehr schöne Arbeit geworden, das Projekt " Armbrust eines Attentäters".! Nur bitte NIEMALS!! diese kleine, nicht gerade ungefährliche "Assassin Armbrust" gegen Menschen einsetzen!! Jedes Leben ist kostbar!! 🤫🤔... Trotzdem, Respekt, lieber Kollege "Feinmechaniker"!...😊😉
Золотые руки!
Great job 👊😎
Thanks a lot
Cool video bud keep'em coming. Wishing you and yours the best. Stay safe and be well brother. 👊😎🤙🍻
Thanks a lot. I'm very pleased
Genius, love it 🙂💯
Suggestion. For the longevity of your file, use it on the forward stroke only. The backstroke only dulls the file teeth.
Proven wrong.
That’s a myth
That’s the problem with TH-cam. All these alleged experts putting out consistently bad information. 🤔🙄
@@Guitarplayer724 I have been a mechanic all my life. From the time I was able to use tools at the age of 3, in 1963, until last year. I know how to use tools correctly. Files can't cut on a backstroke, the teeth don't face that way. I am no expert but I DO know how to use tools correctly.
@@GVBiggs524 Whether the file cuts on the backstroke was never the question. It’s your claim that it will dull the file, which just isn’t true. On the other hand, it won’t cut either, which is just a waste of energy.
Дуже класна штука😊
👍
I see tons of ads of how to stop the ads. What will they think of next? How to block the add blocker which blocks ads?
Ich wette, wenn wir DAS in unserer Dreher Ausbildung gelernt hätten, wären wir alle viel motivierter gewesen... 😁
Agree
Your craftsmanship gives the feeling of a crackhead in the best way, keep up the good work
Thanks a lot
집에서 만들었다며...
처음부터 내집에는 없는 장비가 등장하는군요.
ㅎㅎㅎ
Sympa ... mais au lieu d'utiliser la fraise avec outil manuel, pourquoi ne pas avoir utilisé la perceuse sensitive qui avait un plateau ?
Le perçage aurait d'ailleurs pu être réalisé avec une fraise - en plusieurs passes - et pas besoin de limer pour la finition ...
Thank you. The thing is, I don't have a milling machine.
i'm the like 9k wuuuuuuuuuuuuuuuuu 🥳🥳🥳🥳
Einfach eine Metallhalterung für den Planschlitten kaufen oder selbst herstellen und den Dremel dort einspannen. Dann ein Loch im Werkstück bohren für den Querschnitt, Fräser in den Dremel und in der Bohrung des Werkstücks anpassen, dann das Drehfutter festhalten und den Planschlitten drehen. Einen geraderen Schnitt bekommt man nicht hin, wie industriell.
Excellent!!!
Thank you
Hi I was wondering if you when to sell it. Or what do I have to to get one
Unfortunately, I'm not selling anything right now. maybe in the future
Lo mas casero que vi en mi vida -.
K, now i wanna make a crossbow.....
You work so good 😍❤️❤🎉
Can I also buy this crossbow. Please send some link to buy this.
Unfortunately I don't sell anything right now. possibly in the future
Hello. Do you sell these? I might be interested in purchasing a quantity.
Thanks
Unfortunately, I'm not selling anything right now. maybe in the future
Genial Very Nice 10😅
Thanks a lot
I just hope your bosses don't ask you to assassinate anyone 😂😂😂!!
7:32 If you had clamped the tool in your lathe and attached this milling tool to the carriage, you could have milled the spot out nicely by moving the carriage.
Good idea
Caseiro? Basta ter um torno em casa.
De que eres un gran experto con metales de eso no hay dudas ,pero ponerlas aqui donde los jovenes lo ven ,no lo veo bien
Thanks a lot
Muy bien terminado
Without a set of drawings, it's about as useful as a hip pocket in a singlet
Wow ! - I learned a lot - Thank you . -- Jim
you're welcome
Would you be interested in making one for me and how much would it cost
Unfortunately I don't sell anything now. Maybe in the future.
which lathe do you have?
TV-6
Do you know the name of machine in 7:15 second?
Dremel
what price do you sell?
Unfortunately, I'm not selling anything right now. maybe in the future
Lepiej niż Słodowy!
thank for you teaching