Brilliant thanks for that. I tried turning it off and on at the electrical switched spur and that didnt work. I tried holding the power/reset button and it solved it immediately on new years day. Thanks once again! :)
Exactly same with me - and turning off the power meant the wireless thermostat needed re-setting - had to do that too - all because some prat writing the instruction manual - who just says 'press the power button" has never actually done it...
hey we're currently trying to grow our Facebook group and would love you to join Tony and the team using this link, Tony will be available to answer all your questions directly there's also updates on new trainings we just released too. facebook.com/groups/167070231326174
I've had mine just over 2 years and its doing this. Its not cold enough outside and the working pressure is fine. Could it be a faulty Ignition And Sensing Electrode?
Thanks ... Instruction manual says "Press power button." It doesn't say HOLD THE DAMNED THING IN! (Condensate pipe had frozen, thawed it out but couldn't get it to reset.) Fine Now 👍
Hi mate, I've accidentally snapped off the little lever on the timer that we use (was told to use) to switch the central heating on and off with, while we are waiting for a replacement is there a way to switch my central heating on and off without using that timer lever, its currently in the off position on that timer, cheers pal
hey we're currently trying to grow our Facebook group and would love you to join Tony and the team using this link, Tony will be available to answer all your questions directly there's also updates on new trainings we just released too. facebook.com/groups/167070231326174
hey we're currently trying to grow our Facebook group and would love you to join Tony and the team using this link, Tony will be available to answer all your questions directly there's also updates on new trainings we just released too. facebook.com/groups/167070231326174
hey we're currently trying to grow our Facebook group and would love you to join Tony and the team using this link, Tony will be available to answer all your questions directly there's also updates on new trainings we just released too. facebook.com/groups/167070231326174
hey we're currently trying to grow our Facebook group and would love you to join Tony and the team using this link, Tony will be available to answer all your questions directly there's also updates on new trainings we just released too. facebook.com/groups/167070231326174
Thank you very much. Fixed the boiler for free! 10 mins and working again.
Thanks luckilly i had this fault only and your advice saved my disabled wife from freezing .
Thanks for the comments. Could you please subscribe to our channel
Thank you. You are a life saver. Poured hot water down the condenser pipe then restarted the boiler great job
Thank you for your comments. And may I ask if you would subscribe to our channel?
Brilliant thanks for that. I tried turning it off and on at the electrical switched spur and that didnt work. I tried holding the power/reset button and it solved it immediately on new years day. Thanks once again! :)
Thanks for your comments it great to know I’m helping someone 😀
Exactly same with me - and turning off the power meant the wireless thermostat needed re-setting - had to do that too - all because some prat writing the instruction manual - who just says 'press the power button" has never actually done it...
Thanks for this.... that was so helpful when my boiler went off and I was on my own! 🥰
Many thanks for the info,was able to power up boiler after following instructions.
Thank you for your. Fix. Boiler is now up and running
Hi could you please subscribe to our channel?
Thank you for this, much appreciated. Very glad I didn't call someone out 😂
Thank you for your comments and can you please subscribe to our channel
thank you so much ,i was stack for one hour.
If your boiler is showing 3.2 bar you need to lower the system pressure by venting a radiator. Also can subscribe to our channel
Thank you very much!!!✌️✌️✌️
Hello my boiler is showing 32 bar flashing can you advise me how to fixed please 🙏 thanks
thank you so much,its very helpfull
Works great, thank you!
Thank you for your comments could you subscribe to our channel
Hi guys how would you recommend clearing/unfreezing the condenser pipe? Restarting just brought it back
hey we're currently trying to grow our Facebook group and would love you to join Tony and the team using this link, Tony will be available to answer all your questions directly there's also updates on new trainings we just released too. facebook.com/groups/167070231326174
Thank you, much appreciated
I've had mine just over 2 years and its doing this. Its not cold enough outside and the working pressure is fine. Could it be a faulty Ignition And Sensing Electrode?
It could be and it could be a pcb too
Thank you for your comments and can you please subscribe to our channel please 🙏🏽
What temperature should my heating be on and water thanks
Set the heating to 75 and the hot water to 50
Thanks ... Instruction manual says "Press power button." It doesn't say HOLD THE DAMNED THING IN! (Condensate pipe had frozen, thawed it out but couldn't get it to reset.) Fine Now 👍
Hi mate, I've accidentally snapped off the little lever on the timer that we use (was told to use) to switch the central heating on and off with, while we are waiting for a replacement is there a way to switch my central heating on and off without using that timer lever, its currently in the off position on that timer, cheers pal
Try using a little screw driver to level it up. Or take the front cover and try it again. Also can you subscribe to our channel 😊
Thanks, very useful
Thank you for your comments and can you please subscribe to our channel
Its working now thanks
Thank you so much, boiler up and running again, let there be heat😂
Thank you for your comments would be greatly appreciate if you could subscribe to our channel
Thank you very y.
Really? I have got this problem today in July and is very warm outside 😂
You might have a blocked condense trap, or you have an ignition fault
Done the job, thanks!
hey we're currently trying to grow our Facebook group and would love you to join Tony and the team using this link, Tony will be available to answer all your questions directly there's also updates on new trainings we just released too. facebook.com/groups/167070231326174
Great man
What if the code comes back up???
Then call a engineer
Emma Jones take the water out the boiler and reset worked for me
Worked like a magic, thanks a tone!!
hey we're currently trying to grow our Facebook group and would love you to join Tony and the team using this link, Tony will be available to answer all your questions directly there's also updates on new trainings we just released too. facebook.com/groups/167070231326174
Thank you your comments and can you please subscribe to our channel
Thanks, Godbless,
hey we're currently trying to grow our Facebook group and would love you to join Tony and the team using this link, Tony will be available to answer all your questions directly there's also updates on new trainings we just released too. facebook.com/groups/167070231326174
Thank you for your feedback. Also can you subscribe to our channel please
First it worked but after sometime again showing f28 error...
Your condense pipe may of frozen or frozen again
thx man
hey we're currently trying to grow our Facebook group and would love you to join Tony and the team using this link, Tony will be available to answer all your questions directly there's also updates on new trainings we just released too. facebook.com/groups/167070231326174
👍🏻👍🏻👍🏻👍🏻👍🏻
I did this and this just went back to fault code
You need a Engineer
Legend
Thank you for your comments and can you please subscribe to our channel