Deus Abençoe.18/05/2023- Acabei de Arrumar meu fone que tem microfone tambem, mais eu não estva acertando a sequencia de cores e esse video ajudou bastante.
Thank you sir , i have exactly this problem and the headphones blong to my brother , and he is angry to me , he thinkes i was the one who destroyed it but he used it to... now i will repair it..
What is 'one hit solder?' I notice you just melted the insulation off the wires and tinned them at the same time. I try to burn the insulation off and always seem to fail.
Friend could help me, I have a Skarkoon SHG1 Headset where the connection is the same as this headset that you repaired, but when finalizing and connecting to the PS4 control it works normally, only when I connect it to another NACON REVOLUTION 2 Custom Control he is not recognizing the microphone would have any idea what it could be? Please help me !!!
Hello friend, I have a headset that I tried to fix, but when connecting it to a PS4 custom control, it does not recognize the microphone, but connecting to the cell phone or other control works normally ... could you tell me if there is or type of connection in the plug for it to work?
is it okay to use an IEM with mic (4 PIN) on a 3 PIN extension cable that goes in mixer(until my new 3 pin IEMs arrrive)? or will i damage the cable or the headphone.... i need to pull the headphones jack out a bit so that the sound is ok, cause obviously with 4 pin if i plug it in all the way it will sound like shit
Why do the wires pass through the cable, not short-circuit when touching each other? Shouldn't there be an extra plastic barrier inside so they don't touch each other?
Thank you for this tutorial, now I decided to buy a new one.
Dude 😂😂😂😂
Take the challenge 💪.
😂😂😂
🤣
totally agree with you (saying this after all gone wrong)
Great tutorial!!!
I sometimes put one inner heat shrink sleeve and one outer one to make it stiffer.
Thanks you.
Thanks a lot bro for the tutorial
You really really help me out for fix my earphone ❤❤❤❤
Thanks a lot bro! Helped me. Was able to fix my earphones thanks to you.
Thanks for your Thumbnail ❤️❤️❤️
It's Helpful for me
I actually tried it out and it worked💯..
Thanks for the video...
Bhai apka video dekh Kar banaya success Raha..ty
Süper video olmuş. Ellerine sağlık adamım iyi iş çıkardın teşekkürler. Thanks
Thank you bro you just saved my best friend, MY EARPHONES
It helped me on finding the right order of the colours to solder. It was useful. Thank You, friend!
Does the order actually matter ?
Thank you very much brother. Now my akg earphone is fixed.
Good job bhai jiii fantastic osmm🤘🤘👌👌💪💪🤘🤘
Thank you so much bro for saving my 3000rs headphones God bless you,❤️❤️❤️❤️❤️❤️❤️
Deus Abençoe.18/05/2023- Acabei de Arrumar meu fone que tem microfone tambem, mais eu não estva acertando a sequencia de cores e esse video ajudou bastante.
Lo hice justo como se muestra en el video y esto fue un exito total.
Gracias❤
You save my earphone thanks🙏🙏
Thank you dost ho gya theek abhi wahi earphone laga ke check rha hu
I was struggling with that copper/blue and copper. No one seemed to have its cables as here. Thanks a lot!
Grazie mille per la aiuta.. Questo video mi ha aiutato a riparare il mio apparecchio acustico samsung
Muxas gracias pensé que los avía cargado😭 viendo otros tutoriales y me choque con el tuyo gracias nuebo sub y nuevo like 👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏
Bhai zebronix headphone ka mic box connection beta o na please 😢😢😢
.lo hice lo mismo..pero como tiene en el auicular +- y contestar....no da ni un boton...despues el sonido si funciona
Good repair... No fake. 👍
Clear concept to under standing without any language, 👍👍
Bro you the best
Nuevo suscriptor, me funciono al 100% crack
Thank you sir , i have exactly this problem and the headphones blong to my brother , and he is angry to me , he thinkes i was the one who destroyed it but he used it to... now i will repair it..
Thank you for uploading this video
Vai sach mei dill se thanks 😊 left and right is working in my headphones very nice video 👌
What is 'one hit solder?' I notice you just melted the insulation off the wires and tinned them at the same time. I try to burn the insulation off and always seem to fail.
Me sirvió perfectamente gracias y no se por q le ponen pulgar abajo si esta bien comprendido yo le doy 👍🏻
Funciono se ganó mí suscripción 👍👍👍👍👍👍👍
Oye amigo una. Pregunta y el micrófono sirve?
Thank you for this tutorial.
Makasih banyak bang bro sangat work
is the 2 colored wire and the gold wire in the same line?
Cual es la forma adecuada para soldar las cables de un audífono ya que no son comunes como los demás cables para soldar.
Please give me the name of your soldering lead?
Can it connected to other earphone with intact jack just the wire and no need to solder it directly to the jack pin??
Can u tell us which colour wire for what ??
Thanks for share guys!!!!
Thank you bro thank you very much
sir ji Mera soldering wir chipak nhi rhai hai wir ko change karu ya kuch or problem hai
I can buy a new one, but the challenge is to fix it and understand the process. I love challenges.
Same here bro
That's the spirit
Me too bro
Make it work again.
@@clutchnshift1 YES
Which is second background music
I wasn't sure which order the wires went and this worked perfectly, thank you.
Que buen video gracias amigo 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Thank You ❤️
Nice too see you, friend
my has glue on it can i use hot water to remove it or use something else?
ME GUSTO EL VIDEO Y CON LA MUSICA A BAJO VOLUMEN QUEDA DE GENIAL
Can I convert CTIA to OMTP with this trick?
jis admi ko repair krna ata he, vo naye saman ka sukh lena hi bhool jata he. 🤣😂
Excelente, al fin pude ver como estañar esos cables tan finos.
Thank you so much for this video
Hermano buen video lo logre nuevo suscritor bendiciones gracias x los consejos
bhai take tino me se kahi bhi lga sakte h
Nice so nice useful video
Ubon GS-02A/CHAMP Ke wires kaise lagate hai please help
So... Uh... Which is the ground, left ch, right ch, and mic?
Is wire color need porper seq or can join any??
Its worked thanks broo
Will this also work on the earphones 7?
Great job 😊👍👏
What is the wattage of this soldering iron
Friend could help me, I have a Skarkoon SHG1 Headset where the connection is the same as this headset that you repaired, but when finalizing and connecting to the PS4 control it works normally, only when I connect it to another NACON REVOLUTION 2 Custom Control he is not recognizing the microphone would have any idea what it could be?
Please help me !!!
Thanks you , it's helped me a lot 😇
You fixed that by your own or someone else have done that
Hello friend, I have a headset that I tried to fix, but when connecting it to a PS4 custom control, it does not recognize the microphone, but connecting to the cell phone or other control works normally ...
could you tell me if there is or type of connection in the plug for it to work?
Thank You.
Sir maine boat ka speaker wire change kiya to uska right or left dono ek satha bajta hai ... PUBG khelne bahut problem ho rha sir kya kare
Nice video champion
Thank you for your tutorial
is it okay to use an IEM with mic (4 PIN) on a 3 PIN extension cable that goes in mixer(until my new 3 pin IEMs arrrive)? or will i damage the cable or the headphone.... i need to pull the headphones jack out a bit so that the sound is ok, cause obviously with 4 pin if i plug it in all the way it will sound like shit
Thanks friend
Que color de cable es tierra??
Gracias amigo
Thanks you bro👍
Thanks for the video
can you tell me where can get a pair of steady hands?
Magnífico video 👌👌👌👌👌👌👌
4:38 como se llama eso azul y luego se adhiere al calentarlo
Creo que es tubo termo adherible
Thanks!
Many thanks for your tutorial!!
Cool 💯👌👍🌹
Yes we can listen sound and your earwax in earphones
Thank you so much bhai
Gracias crack🤘
I am trying too make a cord for my car amplifier which it is a telephone jack....coming off to a three wire aux I cut ..what wires go too what wires??
Great information
You are great too, friend
Hit solder wire to nhi h fir kesa kre
आपका धन्यवाद
meu fone tem 8 fios como conectareles
Why do the wires pass through the cable, not short-circuit when touching each other? Shouldn't there be an extra plastic barrier inside so they don't touch each other?
every wire is isolated
Ficou ótimo 👍👈
Love you
Hii bro
Have in 5 wires
1 Red, 1green, 1blue, 1gold, (Gold & Red) combined.
So, who to fix problem,
In 4pole, 3.5mm headphones🎧
Can u help me bro. 🙏
Combined gold with gold and red one
İ have the same have you solved the problem because i don't understand the answer
ขอบคุณครับ
Bhai. Mera year phone ka 5wires. Red+golden, blue, gold, green. How to connect
Bhai mai confused 😕 hoon,,
3 hi wire h,, aur tino dual dual hain,,,
Gracias m sirvió el tutorial
Thank you for that way👉❤️❤️😜