Thank you so much! I was able to fix our printer. I had to check if something got stuck inside and I was able to disassemble our printer with your video
Maybe by this time you have realized that before removing the clips of the cover of the ink tanks, you didn't have to remove the ink tank caps. Only after the clips are released, then you may remove the caps with the printer flat on the floor. Then, right after removing the cover of the ink tanks, you should have replaced the caps or covered again the ink tanks to prevent spillage. Then, you may continue with the removing or cleaning of the other parts. BTW, there is a waste ink pad just under the printer head. It has a casing removable by removing the screw at the back. Anyway, thanks for sharing.
Thank you so much! I was able to fix our printer. I had to check if something got stuck inside and I was able to disassemble our printer with your video
Thankyou na ayos ko Yung printer ko
Nakita ko lahat Ng problem may mga nakabara lng pala kaya nag jammed :)
Maybe by this time you have realized that before removing the clips of the cover of the ink tanks, you didn't have to remove the ink tank caps. Only after the clips are released, then you may remove the caps with the printer flat on the floor. Then, right after removing the cover of the ink tanks, you should have replaced the caps or covered again the ink tanks to prevent spillage. Then, you may continue with the removing or cleaning of the other parts.
BTW, there is a waste ink pad just under the printer head. It has a casing removable by removing the screw at the back.
Anyway, thanks for sharing.
...chambeas en el suelo, que loco (en buen plan), Tnx for sharing!, me há sido muy útil...👍
thank you so much! this video has been very helpful.
thank you a lot , you help me. God Bless!
Thanks for sharing Bro! subscribe done! more power s channel mo! Godbless!
Thank you.
Thank you ginaya ko to. Ngaun d na umaandar printer 😥
Cut the ink link cap so no need to remove it. 😊
ang gling
Tagal magtangal ng cover ng ink
Thank you. Nag-clog ang L120 ko kc matagal hindi nagamit. Nangyari rin b yon sayo? Pano tanggalin ang clog sa printer head?
시키는대로했는데 프린트헤드청소중이라고계속뜨는데 어떡하죠?
Thanks for sharing tutorial
Tagal😂
Thanks
hindi naman to disassemble eh. how to remove cover lang naman. sinayang mo oras ko. sorry po pro hindi po tugma sa discription mo.
Он сам то понял зачем разбирал?
Видео на тему: инструменты не завезли
Весь пол засрал пока снимал крышку
Muito bom o conteúdo me foi muito útil para resolver o problema da minha impressora.
obrigado.
Bb
Balda deskasrte mo noy
NL"mlm
WALA HINDI NAMAN DISAASBLE YAN EH DPA T LAHAT NA PIYESA CASING LANG ANG KINALAS MO EH DPAT PAT I SMALL PARTS AND INK PAG HIWALAYIN MO LOL