HELP ! 2000 Honda Accord EX 3.0. That's an xln't tutorial. I just can't praise you enough. One of the most clear and concise on youtube. Thank you. However, my car wouldn't start when the engine was warm but started and ran fine just fine after it cooled down. I did as you instructed by unclogging the ports in the plenum, etc. But now it idles rough then dies. (seem to run fine at higher RPM's) Maybe I have a bad ERG valve ? A vacuum leak ? Cracked or warped plenum ? Leaky gaskets ? Hole in fresh air intake rubber boot ? Stuck throttle body ? Do you have a video how to reset my warning lights on the SRS, and ABS ?
I’ve done everything accept check the voltage,I’ve cleaned everything & also changed the egr valve & the check engine light is still coming on.what else could be the problem??
DIY-HAVEN thank you. I would say it’s definitely essential for fixing cars and I’ll days to have information such as Alldata. There are quite a few services out there now such as Mitchell and a few others.
How to Automotive btw I've heard that the Autel Beats Snap-on when it comes to foreign cars. Im still learning to use the ms906bt. It's quite an amazing tool for the cost
Not hating. But just for future reference. There’s 9 bolts to remove the intake, and it takes a sequence to remove the bolts in order to prevent something going wrong.
That is a clean engine!!!! Regards.
HELP ! 2000 Honda Accord EX 3.0. That's an xln't tutorial. I just can't praise you enough. One of the most clear and concise on youtube. Thank you. However, my car wouldn't start when the engine was warm but started and ran fine just fine after it cooled down. I did as you instructed by unclogging the ports in the plenum, etc. But now it idles rough then dies. (seem to run fine at higher RPM's) Maybe I have a bad ERG valve ? A vacuum leak ? Cracked or warped plenum ? Leaky gaskets ? Hole in fresh air intake rubber boot ? Stuck throttle body ? Do you have a video how to reset my warning lights on the SRS, and ABS ?
This is marvelous. Thank you
Great video Brian & good tips on all your videos!
Hayward's Automotive thank you!
Excellent Video. Great Job!!!
Outstanding Video Great Commentary.
I’ve done everything accept check the voltage,I’ve cleaned everything & also changed the egr valve & the check engine light is still coming on.what else could be the problem??
Other than that, great video and great job.
what is the diameter of the speedometer cable?
Beautiful demonstration! Would you say that alldata is essential in today's automotive world? Where else to find flow charts?
DIY-HAVEN thank you. I would say it’s definitely essential for fixing cars and I’ll days to have information such as Alldata. There are quite a few services out there now such as Mitchell and a few others.
How to Automotive btw I've heard that the Autel Beats Snap-on when it comes to foreign cars. Im still learning to use the ms906bt. It's quite an amazing tool for the cost
DIY-HAVEN I would agree with you there the snap on is not very good for European cars. I,m getting familiar with the Autel 908
How to Automotive yeah that was very appealing but above my budget. I'm still very young in the field
DIY-HAVEN I can understand that got to be smart when it comes to buying tools.
Not hating. But just for future reference. There’s 9 bolts to remove the intake, and it takes a sequence to remove the bolts in order to prevent something going wrong.
damn thats some good work!
Joachim Johan thank you. Did the video help you with repair your car?
no i dont drive junk with egr HAHA ;)
Great video. BUT how do you PREVENT that carbon buildup from happening again? Do you know what is causing that? 😶
Einstein Casino you there’s no much you can do.
Use CataClean ..cleans everything
Use about every 6 months
@@estelleschneider9033 Okay. Cool! Thanks!!