+Dave's woodworks Thanks Dave. I appreciate the compliment! Checked out your channel. You've got mad skills on the scroll saw, Brother! Saw you are in No Cal. I'm gonna be at Maker Faire this week in San Fran. Look me up if you are there!
Feddie, loved the project. But the push sticks should be sold in a set of 4. Cause you know there would be the progression from "teaser" on. Count me in for a couple when they're up.
That looks flipping great,,, cut in half, add some holes and you could have some nice stands for the back deck/patio also for momma's plants,,, Again great job.
Sweet job....very nice way to display a big Buck....a lot better than the way my wife displays one, on the front of her new cars, and I bet you good money its a lot less expensive!
It came out very nice! The only thing I would have done different is not to have the big flat bottom. To great of a chance it would rock on a uneven floor. I would have mounted the mdf a couple inches high so the pedestal was siting on the edge.
Really nice job! Clearly been a hot minute since you posted this video but I'm curious if/what did you use to weight the base to prevent it being top heavy? I have a P&Y Shoulder Elk mount I would like to put on a pedestal instead of wall but can't afford to pay a thousand (+) dollars. Since it's considerably larger than a deer, I'm wondering if this could be adapted to accommodate.
So sorry I am just now replying. I thought I did.... Yes, I have some in stock and could have one to you by Christmas. Just go to my website to order. That link is on my channel. Thanks for watching!
Hi Feddie, thanks again for another entertaining and well produced video. It really shows you put a lot of time and energy into both the project and the video itself. I started my channel a few months ago and only now realize how much time and energy go into producing quality content. Thanks again for everything you share and if you find the time, please visit my small but growing channel and maybe even consider subscribing... :-) Regards from the Netherlands.
Thanks George. Three things. 1). Had a good $ year and had to spend some for tax purposes. 2). Dust collection! 3) the Festool can be placed against a wall and still operate normally.
I have not offered them for sell but I am getting a lot of requests now. :-) I have to be gone for a few days but I will try to put up a pre-order page on the site and try to get about 20-25 pre-orders and just batch them out as requested. I'll post something on the Facebook page when I do.
Incredible workmanship ! Great buck !
Pretty sweet, man! Your pushsticks were crackin' me up!
+Carter Wilson Workshop Haha. Thanks for watching, Carter....
You're right Feddie. I've nevertheless seen a mount like that before but the deer sure is nice. And the pedestal turned out great, man. Nice job! Troy
+secondwind75 Thanks for the kind words, Troy. I really appreciate it!
Looks great Freddie! Some tall grass and brush around the deer and you would swear its alive! Cool build!
+WoodenCreationz Yeah, it was kinda creepy having that thing in the shop. Felt like he was looking at me everywhere I moved... Ha!
Exactly what I was looking for. Great work!
Awesome way to display a deer. I'll have to borrow that one.
+Terry Lyons Let's make one in your shop and veneer it in copper!
ohhhh that push stick is AWESOME
+Dave's woodworks Thanks Dave. I appreciate the compliment! Checked out your channel. You've got mad skills on the scroll saw, Brother! Saw you are in No Cal. I'm gonna be at Maker Faire this week in San Fran. Look me up if you are there!
+blazingnailgun thanks man,sadly I'm not gonna make it.
Great build Feddie, the frame approach was a unique way to solve that problem. I was supposed to mail you a 9 volt for that smoke alarm.
Great project Feddie! Awesome push stick!!
+RetroWeld Hahaha. Thanks for checking it out Doug!
who would thumbs down this? this is awesome!
Perfection!! Man i could use a few more of these myself .
Feddie, loved the project. But the push sticks should be sold in a set of 4. Cause you know there would be the progression from "teaser" on. Count me in for a couple when they're up.
thank you feddie i absolutley love to deer hunt and this will be my next project,keep the videos coming your a good teacher
Is there anyway to get the board measurements for this project? Looking at giving it a go but dont know what size boards are being used here
That turned out beautiful!!! Your push sticks are AWSOME by the way Hahaha. Keep up the good work!!
+Kevin Riddle Thanks!
That looks flipping great,,, cut in half, add some holes and you could have some nice stands for the back deck/patio also for momma's plants,,, Again great job.
Cool project Feddie!
Sweet job....very nice way to display a big Buck....a lot better than the way my wife displays one, on the front of her new cars, and I bet you good money its a lot less expensive!
+dwight fry That's funny, Dwight. Thanks for checking in!
What is the total cost to make if you don’t mind me asking
very nice craftsmanship
+Juan Mendez Thanks, Juan.
Looks Great! very nice buck as well!
Looks Great.
BEST PUSH STICKS EVER!!!
Your smoke detector beep was freaking my dogs out, and it had me checking mine for a minute.
Awesome work! I think I am going to try this myself!
Wow, nice work. All those angles, I'm sure I would have built it three times over with all my messed up cuts not fitting right.
Very well done!
Awesome job
That dear looks good in a trucker hat! What happened to the pink and brown?
+Greg's Garage Haha. Thanks for checking it, Greg. The pink and brown one is a signed, limited edition. Way too valuable to actually use.... :-)
Awesome work.
It came out very nice! The only thing I would have done different is not to have the big flat bottom. To great of a chance it would rock on a uneven floor. I would have mounted the mdf a couple inches high so the pedestal was siting on the edge.
nice job Feddie!
Really nice job! Clearly been a hot minute since you posted this video but I'm curious if/what did you use to weight the base to prevent it being top heavy? I have a P&Y Shoulder Elk mount I would like to put on a pedestal instead of wall but can't afford to pay a thousand (+) dollars. Since it's considerably larger than a deer, I'm wondering if this could be adapted to accommodate.
Very cool. Did you have to preserve the log or left out natural?
Excellent video, very detailed and informative, Thanks for sharing. Did you do any kind of topcoat or finish on the pedestal?
Long time no see my friend !!! Welcome back ! P.S. Love the "Shocker Stick" !
that push stick cracks me up haha
+Matt Lane You knew it would make an appearance, huh.... :-)
+blazingnailgun where can I buy one? Lol
that cedar is nice wood is that local wood Feddie ?That is a nice mount but different
I would like to put an order in for those push sticks, how much and can u have them to me by Christmas? The shocker push sticks that is. Best ever.
So sorry I am just now replying. I thought I did.... Yes, I have some in stock and could have one to you by Christmas. Just go to my website to order. That link is on my channel. Thanks for watching!
Hi Feddie, thanks again for another entertaining and well produced video. It really shows you put a lot of time and energy into both the project and the video itself. I started my channel a few months ago and only now realize how much time and energy go into producing quality content. Thanks again for everything you share and if you find the time, please visit my small but growing channel and maybe even consider subscribing... :-) Regards from the Netherlands.
Awesome job!
Thanks brother!
Great job!!
+Missy George Thanks!
Is it possible to get the plans/drawings for this pedestal?
Hey Fred, like the project...question is see you changed from a Dewalt chop saw to a Festool, Why?
Thanks George. Three things. 1). Had a good $ year and had to spend some for tax purposes. 2). Dust collection! 3) the Festool can be placed against a wall and still operate normally.
What kind of wood is that? Whatd you charge for that base?
Someone has upgraded to a bunch of powermatic tools since the last videos
Nice build. What kind of wood did you use
I think I read somewhere in description or on screen text he used cedar.
Nice Job Are You Buying One of everything from Fes Tool.
+Milton Fludgecow I'm drinking the cool aid, Brother. And man, is it expensive... :-)
sweet
+Matt Diresta Thanks for watching, Matt. I appreciate the encouragement!
Wonder what a European mount would look like on a pedestal like that?
Hey Feddie, cool video as always, where can I get a shocker stick??
+wayne creech Thanks for checking in, Wayne. Good to hear from you. I make those push sticks on the CNC machine.
+blazingnailgun do you sell them? I looked on your site but didnt see any..
I have not offered them for sell but I am getting a lot of requests now. :-) I have to be gone for a few days but I will try to put up a pre-order page on the site and try to get about 20-25 pre-orders and just batch them out as requested. I'll post something on the Facebook page when I do.
Did you make that shocker push stick or did you buy it?
very cool!
shocker push stick? ha. did you make it or buy it?
+Anthony Tobias Thanks for checking in, Anthony. I make them on the CNC.
After showing my adult son the video, he said the "teaser" should be made for 1/2 stock or smaller, while the "Shocker" needs to be used only once.
Is that smoke alarm driving you crazy again?
+thermmaloverload YES!!!!!
That did it I Won't be watching you anymore now that you have that machine that's not good working
Don't understand what you mean, Tom.
Anywhere to get plans/drawings?