Focus MK3 wing mirror replacement

แชร์
ฝัง
  • เผยแพร่เมื่อ 9 ก.ย. 2024
  • In this video, I'll be replacing the wing mirror of my wife's Focus MK3.
    Very simple process, which is very similar to the one for the MK2
    #ford #fordfocus #fordfocus3
    I am also on Instagram and Facebook where you can also contact me:
    Instagram:
    / gentilsgarage
    Facebook:
    / gentilsgarage

ความคิดเห็น • 63

  • @pdebie1982
    @pdebie1982 16 วันที่ผ่านมา +1

    I bought a red Focus last week and wanted to replace the side mirror “caps” (don’t know the exact name since English isn’t my native language) by black ones. This video made it very clear on how to do it! Thanks!

    • @GentilsGarage
      @GentilsGarage  16 วันที่ผ่านมา

      Thanks, glad it helped

  • @matskieden511
    @matskieden511 10 หลายเดือนก่อน +2

    Thank you fthe video. Some idiot smashed into my wing mirror this evening and I've just ordered a replacement from ebay for £45. This video exemplifies excellently the procedure of removal and replacement. Thanks.

    • @GentilsGarage
      @GentilsGarage  10 หลายเดือนก่อน

      You’re welcome, glad it helped!

  • @josse4201
    @josse4201 ปีที่แล้ว +1

    The perfect tutorial ! I've done easily all the steps you did on my wing mirror. Many thanks for this video !

  • @bikerjock2654
    @bikerjock2654 ปีที่แล้ว +1

    Excellent video! I’ve just replaced the smashed wing mirror on my Mk3 Focus, and it was as simple as you made it seem. And it works (the remote adjustment, that is). Many thanks.

  • @ednash45
    @ednash45 9 หลายเดือนก่อน +1

    Thank you for this video. I have just changed my wing mirror and this made it so simple and easy for me.

    • @GentilsGarage
      @GentilsGarage  9 หลายเดือนก่อน

      Thank you, glad it helped

  • @ol.berry01
    @ol.berry01 ปีที่แล้ว +1

    Cracking guide! Exactly what I needed, even took about the same amount of time

  • @RawTopShot
    @RawTopShot 2 ปีที่แล้ว +4

    A local Ford main dealership quoted TWO HOURS LABOUR to do this exact job!

  • @robmillerrally-media7257
    @robmillerrally-media7257 3 ปีที่แล้ว

    Lost mine in the carwash ......... thanks for the very informative vid!

  • @jaycurran3783
    @jaycurran3783 3 ปีที่แล้ว +1

    Brilliant tutorial, worked a treat 👍

  • @harrypotter4309
    @harrypotter4309 3 ปีที่แล้ว +3

    Watch out not to dislodge the foam noise reduction strip when the mirror is removed (at the bottom, in the door) if this gets lost or out of place you end up with a lot of wind noise, and the mirror has to come off again to sort it out !! Ask me how I know !! (See it at 3.53).

    • @GentilsGarage
      @GentilsGarage  3 ปีที่แล้ว +1

      Yes, you raise a good point there.

    • @flo_1604
      @flo_1604 3 ปีที่แล้ว +1

      I had my mirror replaced 1 week ago in a body shop, since that day I have a wind noise as you described it, could you tell me how to fix that issue please?
      Sorry for my English.

    • @harrypotter4309
      @harrypotter4309 3 ปีที่แล้ว +1

      @@flo_1604 There a cellular foam strips around the area where the mirror sits. They appear to not be fixed in any way, and are to easy to dislodge and lose. Mine just fell out on the floor !!. I put them back in (there are gaps that let air in, they just break up the wind noise I guess), and sealed the ends with silicone. It's 90% better !! One day I will go back in with the silicone and see if I missed any gaps. Hope this explains it.

    • @GentilsGarage
      @GentilsGarage  3 ปีที่แล้ว

      @@flo_1604 need the noise reduction strip back in. Look on the other mirror and compare both to see what is missing.

    • @pierredegaye2141
      @pierredegaye2141 7 หลายเดือนก่อน

      what thickness are the strips? I could buy foam adhesive strips but need to know suitable thickness please?@@GentilsGarage

  • @andrewplummer2088
    @andrewplummer2088 ปีที่แล้ว +1

    Great tutorial! I replaced my mirror in this way but now when it rains the carpets in the driver's footwell and the rear passenger footwell on the driver's side get very wet. The new mirror appears to be mounted correctly. Could the leak be related do you think?

    • @GentilsGarage
      @GentilsGarage  ปีที่แล้ว +1

      Thank you. Check the boot floor where the spare wheel is for water. It’s a common Focus Mk3 issue and it’s the vents behind the rear bumper. I have a video about it and I had exactly the same issue as you.

    • @andrewplummer2088
      @andrewplummer2088 ปีที่แล้ว

      @@GentilsGarage I've checked the boot and spare wheel area, and it's bone dry - it's literally just the footwells that are wet, with no indication as to where the water is getting in. It just seems like an odd coincidence that water starts getting in on the driver's side soon after I replaced the driver's side mirror. It's very odd. I've now booked it in with Ford (it's used but I've only had it a short while) who are going to check it over for me.

    • @GentilsGarage
      @GentilsGarage  ปีที่แล้ว

      @@andrewplummer2088 that’s very odd indeed because of water from the outside drips inside the door and through the drain holes.

    • @andrewplummer2088
      @andrewplummer2088 ปีที่แล้ว

      @@GentilsGarage that’s what I thought. It’s definitely rain related as opposed to something leaking from within as the water always appears after a heavy downpour. I did however notice the wing mirror was slightly loose so have tightened it, so I’ll see if that makes a difference, but as you say, any water from outside should leak into the door and out the drain holes.

  • @user-wq2ms8iv3s
    @user-wq2ms8iv3s 3 ปีที่แล้ว +1

    Thank You!

  • @Breakhoven
    @Breakhoven 6 หลายเดือนก่อน

    Thanks for tutorial. After replacing Mirror shudders when idling. Some idiot smashed my old one and now i have get original but now i got second hand one.The one mirror
    not smashed is not vibrating in only the side where the idiot hit my car.

    • @GentilsGarage
      @GentilsGarage  6 หลายเดือนก่อน

      That’s strange, it should not shudder unless the second hand one was defective

  • @victorbarulis4716
    @victorbarulis4716 ปีที่แล้ว +1

    Always better to check bolt and screw heads Pozzi or Phillips .for tight snug fit ,or tendency to chew up the heads ,Don,t tighten screws fully ..just snugg, then go around again for final tighten ,Cos metal screws and bolts stretch after tightening ..Why don,t they make possible breakables out of the special shatterproof A.B.S. And not those that break easily, Actually we know why don,t we …more money in the till Overall great little car the Focus ..Problem in the estate rear inside lights too low ,even Tesco bags block these little side lights ..Why put on fancy little glow lights on int. door hdles. And footwell area ? Door edge lights that go on as you open door are 100times better and safer. Luff you .

  • @Onkar8080
    @Onkar8080 ปีที่แล้ว

    Do i Have to replace full wing mirror if its not folding but the mirror is ?

    • @GentilsGarage
      @GentilsGarage  ปีที่แล้ว +1

      I don’t think you do, unless you really need the whole casing to fold for when you car the car in a narrow area or something

  • @Lolpower777
    @Lolpower777 2 ปีที่แล้ว

    Can a MK2 side mirror with Light indicator be placed on a MK2 06 with a side view mirror no light indicator ?

    • @GentilsGarage
      @GentilsGarage  2 ปีที่แล้ว

      I’m not sure. It may be possible, but the indicator cable has to be moved from the wing and routed to the door.

  • @pierredegaye2141
    @pierredegaye2141 7 หลายเดือนก่อน

    Will this work for 2017 focus estate ? Also what do you use to remove the speaker and trim , not sure I have a plastic tool like that ?

    • @GentilsGarage
      @GentilsGarage  7 หลายเดือนก่อน

      Not sure, but they are not too different. You can use an old knife and tape the sharp edges with masking tape but it has ti be done more gently in order not to damage the plastic

    • @pierredegaye2141
      @pierredegaye2141 7 หลายเดือนก่อน

      Your guide was great and I replaced mine but like others have said, lots of wind noise. :(
      I will have to remove it again at the weekend and check but if the foam noise strip is not there or lost , where can I get these ? If it is there , is it easy to realign , how best to do it / how should it be ?

    • @GentilsGarage
      @GentilsGarage  7 หลายเดือนก่อน

      @@pierredegaye2141 thank you.
      I would just get a normal purse of foam from anywhere you can find and cut to size. The best way to fix it is to use a small dab of glue just to hold in place.

    • @pierredegaye2141
      @pierredegaye2141 7 หลายเดือนก่อน

      what sort of foam would be best? how thick?
      @@GentilsGarage

    • @pierredegaye2141
      @pierredegaye2141 7 หลายเดือนก่อน

      would 10mm be too thick (adhesive foam tape)?
      @@GentilsGarage

  • @santodifresco4817
    @santodifresco4817 3 ปีที่แล้ว

    What is the difference with the powerfold model? In term of installation. Thanks in advance

    • @GentilsGarage
      @GentilsGarage  3 ปีที่แล้ว +1

      I’m afraid I don’t know. Definitely more cabling, but the screws and outer casing should be similar.

  • @kylekessel2330
    @kylekessel2330 2 ปีที่แล้ว

    what are the plug ins for the driver side? are they "mirrored"

    • @GentilsGarage
      @GentilsGarage  2 ปีที่แล้ว

      Maybe just blanks for other mirror upgrades, but I assume they are mirrored

    • @kylekessel2330
      @kylekessel2330 2 ปีที่แล้ว

      @@GentilsGarage I finally figured out that after many videos of other people doing mods with the lights that they are not mirrored, its the same as the passenger with the black wire to the left and red line wire to the right for the driver side. Just to let you or anyone know that is curious, took me a bit to figure it out, I wanted to make sure to not blow a fuse or something but yeah I appreciate your response! :)

    • @GentilsGarage
      @GentilsGarage  2 ปีที่แล้ว

      @@kylekessel2330 thanks, I got confused and thought that it was related to something else😂

    • @kylekessel2330
      @kylekessel2330 2 ปีที่แล้ว

      @@GentilsGarage Yeah I'm sorry im not clear at all, I was talking about the heated mirror wires, I mentioned lights cuz i found them on people doing sequential light mods and saw the driver side wires on one video for the heated mirro and got so excited! lol

    • @RawTopShot
      @RawTopShot 2 ปีที่แล้ว +1

      @@kylekessel2330
      It wouldn't matter because its essentially just forming a loop (the heating/resistance element), so as long as it has the two wires either way round, it's still a loop that will heat up when power is passed through it.

  • @maddog9793
    @maddog9793 ปีที่แล้ว

    I see that the new mirror don't have the climate temperature sensor in it and that's a big problem cause your AC will not work properly

    • @GentilsGarage
      @GentilsGarage  ปีที่แล้ว

      The old mirror didn’t have it either because my car has no climate control, but it does have AC. The new mirror is exactly the same as the old one so everything works as well as before.

  • @cuddygottitv6447
    @cuddygottitv6447 ปีที่แล้ว

    What type of screwdriver is that ?

    • @cuddygottitv6447
      @cuddygottitv6447 ปีที่แล้ว

      What do you have on it ?

    • @GentilsGarage
      @GentilsGarage  ปีที่แล้ว +1

      I had it for many years. It has an internal ratchet and it can extend. Can’t remember the brand!

  • @ChemistRNS
    @ChemistRNS 3 ปีที่แล้ว

    Hi great video, can you please tell me the shop you used on ebay to get the painted version? Thank you

    • @GentilsGarage
      @GentilsGarage  3 ปีที่แล้ว +2

      Thank you. It’s called Focuscity and they are on ebay.

    • @ChemistRNS
      @ChemistRNS 3 ปีที่แล้ว

      @@GentilsGarage thanks so much mate! Really appreciate the reply 😁

    • @GentilsGarage
      @GentilsGarage  3 ปีที่แล้ว

      @@ChemistRNS you’re welcome

  • @rayhowe3102
    @rayhowe3102 ปีที่แล้ว

    not rocket Science

    • @GentilsGarage
      @GentilsGarage  ปีที่แล้ว

      Indeed, but everything becomes easy once we know how to do it.