More Mods For My SUPER RARE 2004 Mustang Cobra!
ฝัง
- เผยแพร่เมื่อ 12 ก.ค. 2023
- The cobra has been an absolute ripper since the dyno tune a few weeks ago and I've been driving it everywhere! But we all know I couldn't resist adding a few simple mods to the interior and also some minor cosmetic touches! Stay tuned as I wrap this awesome cobra project up!
I was just thinking about my boy Chris yesterday, about how his vids are so good, informative and not typical like other TH-camrs with that weird “TH-cam voice”, cringe intros and the constant “begging” of the viewers to subscribe and like the video. This dude is a beast at everything
Appreciate it man!
Damn, so true @DavidGavinETC
Hi! Im Holden Hiscock and I can hold yours if you'd like 👌
@ChrisSullivan69 spot on about the council/console thing! Almost as bad as people who think they “brought a new car’ ITS BOUGHT 😡
@@rossbright1123 prostrate and Prostate also......
Thank you for not painting the calipers red! Black turned out great!🙏🏻
I have received council
to not cancel
the watching of this video on how to remove the console. ;)
Almost done with watching this series straight to come home after a hard day and watch an uplifting series like I said, with my new Mach 1 I’m getting inspired
Phenomenal job filming and editing... In case nobody else said anything. 😊👍Car is looking so clean, even the door jambs are mint. 😊🙌
Great channel. Pretty much just need to keep doing what you’re doing… will be a steady upward trajectory. For sure.
It is all about the attention to the details. Nicely done. Beautiful car.
Love 03/04 cobras. Good job on bringing this one up, and doing all the little necessary things. This cobra is in good hands for sure.
Carroll: I did that.
Chris: Hold my Miller Lite.
“Center console not center council”. 😂. I couldn’t agree more.
You astonish viewers with your meticulous details
I really enjoy your videos and always look forward to the next one. Your attention to detail is undefeated!!
I didn't know the Easy Off trick 👍
wow a minty fresh SVT cobra that isn't trashed.
Great work man. This makes me miss my Ingot silver 04 cobra I bought back in 08 when I was 18. Definitely a more raw car to drive and fun as hell.
Unpopular opinion(maybe): Terminator Cobras are the best sounding cars on the road. Obviously, they sound great on a pull. But, I just love how they sound at idle and very light acceleration. Such a presence. Anyway, beautiful car. I'm glad I'm not the only one that enjoys your content.
They do sound awesome
You got it looking like a Barrett Jackson show in there. Great work on the rides man, workmanship is impeccable to say the least.
Awesome Chris, great mods! Looking so ever sweet, just love this beast.
Been waiting on more content. Thanks man 👊🏽👊🏽👊🏽👊🏽👊🏽
Maybe a steering wheel upgrade? That stock one is narly. Great job Chris always!
Would love to see a project Mopar on the channel Chris! I think it would do very well
My OCD has me needing valve stem caps on! Great job love your work!
As always great content. Keep it coming Chris. Eagerly waiting for the next drop!
Another great video! My favorite TH-camr on the platform rn no doubt 👍
Chris I’m waiting for you to blow up my man. Keep doing you !
Thanks man!
Looking good Chris!!
Chris, that garage is legendary!
Simple mods make a big difference! Looks great!
Awesome video!
I really enjoy your channel! Keep up the good work!
Man some of the cleanest cars on you tube by far especially the Camaro……one day 😢one day
Another great one, love the car, love the work👍
I hope you keep this one....I can't get enough of these terminator cobras.
Love the cobra content!
favorite channel
You're the 🐐 man, every time I see one of your videos you always got some cool shit going on lol. Keep up the good work brother, my favorite car youtuber by far!
I only just recently found your channel due to the Cobra. I am loving the content, and I have learned some things from your videos.
Awesome, thank you!
Chris the Cobra is a keeper great info and work as always outside needs some ghost stripes or something keep making these great videos thank you
It’s refreshing to see that I’m not the only one that has a OCD problem with the little things on a car! I sold a boat the other day that I restored a wile back and the guy paid me extra just because he knew I had did the work and I wouldn’t let anything slide when it came to the little things! 😎🤙🏼
If your tired of that rain just send it down to Texas, we'll take all you got, it was 102 at 6:30pm
"Friends don't let Friends drive stock". Unknown
- George Washington
😂😂😂 best comment and reply
Dude I can’t get enough of the cobra content 🤘!!! My dad has a bone stock black 2003 10th anniversary edition he ordered new from the factory. Still has it to this day. Only has 14000km on her.
Ur channel is super underrated man. I love all of your builds and videos. Much love ❤
I freaking loved that car I'm glad it has a loving caring home
I know people keep saying this but only 38.2k subscribers.....im hoping more peole will subscribe soon!! Your the only car content channel i primarly look forward to watching !
Thanks for watching!
*You* can easily install a Mr Cool heat pump in the garage heating and cooling price.
You could to it. It will save you so much time buy getting the humidity out of the garage.
(You can say it was your idea)
Good idea!
I can't wait to get my self a nice manual sports car 😍
Just found the channel. Sub’d. Clean, clear videos and you seem chill as hell. Keep up the work! Sweet rides!
Nice car 👍🏻
Another Great Video. Your camera work is awesome..looks like a pro filming 👍 Up
Another great video
That thing sounds amazing 3:07
Man what a beauty. That wide band is essential! Great way to start. I think it would be awesome if you did your own port job on that Eaton. Would make for great content!
Started following Chris around 9K subscribers so cool to see where he's at and where this thing can go. He's the real deal. I'm not a gearhead or really that mechanically inclined but I've learned a lot. Keep em coming Chris, we're riding with you bro! Salutations from Wisconsin.
Appreciate you bro!
The brake calipers came out great. So good, I think I need to do this to mine! 👀
Another great video, Chris. Your work is professional and you make it look easy. Wish it went that way on my wrenching projects. Alas, mine usually involve many choice words and a few trips back & forth to the parts store.
Some of that gets edited out lol. It's not always easy!
wow..the drone!!!!
It's worth it lol
Great content.Thank you
Absolute beaut
Needs some steamroller CCW Classics to make it perfect. I know they are played out on Termis and mkiv Supras, but just a perfect fit 👌
What i love and have continued to love about this channel is he doesn't screen WHAT'S UP GUYS in the beginning of the video. Please never do that 😂 we subconsciously all hate it
Just beautiful amazing
Im here ... I made it back Chris!!!! Great video where is Tuck the pup lol . Love your videos keep it up !!!!
Rained 2 days in last 2 months in mn. Brown here
Beautiful car. I have a '96 that I am turbocharging. I have used both Innovate, Zietronix, and AEM wide bands. They all work well, but the AEM has the fastest response time. This is most important if you are using it for tuning, especially accelerator enrichment. The stock 2004 Cobra fuel tables go up to 22 lbs. boost. With a pulley, chip, and cold air, I have personally seen an otherwise stock 2004 run 6.99 in the 1/8 mile. That's sub 11 sec quarter mile.
Looking great as always.
The cts 4 pot brembo upgrade is a cheap alternative if you wanted a bit more stopping power without replacing the rotors.
Side note, i have a new maximum motorsports strut tower brace for cars with a stock eaton if you are looking. Wink wink nudge nudge.
Ha! I thought I was the only one that used easy off oven cleaner on my wheels! Works good!
Haven't found anything that works as well as oven cleaner lol. That stuff does WORK
NH gang 💪💪💪
Love the videos bro… I have a yellow 2001 cobra and I’m really getting some good tips from your videos… Thanks
Glad to help
fucking love this channel bro, keep up the sick shit.
Once again, you show us all the quality in your work on yet another amazing machine. Maybe have the "COBRA" letters on the calipers be yellow opposed to a metal finish, that way it would make for a nice offset from the COBRA on the rear bumper. Not that it looks bad, just a thought.
Man these videos have me missing my 03 zinc yellow cobra.. although screaming yellow is nicer imo.
Also those rims, you can take lacquer thinner and clean off the back lip and its full chrome underneath. Looks nice all polished up. Great job on this car.. going to be in market for a 04 screaming or comp Orange in near future...love these cars.
I know TH-cam is just a side hustle for you, but still amazed your channel doesn't have more subs. Keep rocking it for us DYI guys.
Would hav been nice to see the Cobra n yellow but either way 😍
I thought about that. But thought it might be tricky to make it look clean. I might give it a shot using a touch up pen🤙
Nice 💪
😂😂😂 Group of people between u & the passenger
I love your automotive sensibilities and sense of aesthetic correctness, trying to maintain much of the factory DNA with tasteful upgrades...like the black calipers etc.
Beautiful car and it fell in the right hands.
All said and maybe just me, but I don't like the A-pillar gauges. I do understand why you installed them...yes understand boost and air/fuel is very important etc, but to me a much more elegant upgrade but a lot more work is...pull the cluster and redo with Autometer gauges or equivalent and keep the A-pillar factory clean. You can install whatever gauges you prefer with a new cluster. Yes a tremendous amount of work...or...leave it stock and if you have connections in the industry, send the cluster out and have the air/fuel gauge recalibrated for more boost and/or just change that particular gauge within the cluster.
This is a special car and you are the right owner until you set it free into the wild.
I don't understand why you don't have a million subscribers!
Man😂😂 i WISH i could clean my wheels off my car i have to get a lift 😂😂
Ditch the shift knob and lower it a little bit and it’ll be 🤌🏻
Great job on sanding the COBRA letters on the caliber but I would have put some type of sealer on the exposed metal because it's going to corrode rather easily now. Just my thoughts.
your videos are very nicely made. Please do not go the route of many others where half the contents are promotional for various products. I understand you spend a lot of time on this channel and want some benefits. The allure of the contents you post are your commentary, openness, personality and project workmanship. thanks for a great channel.
Hearing this is making me giddy..Picking up a 1st gen ctsv with an lsa Monday!
That's sick!
@@ChrisSullivan69 thanks man, can’t pass it up for the price!Pretty sure I seen you’re old one for sale a few months back up in New York. If it wasn’t it it was damn near identical. Enjoying the quality videos you put out!
@coltengottschalk1049 yeah it was for sale in upstate NY a few months ago
This video makes me want to get my fox body going....
Atta boy
I’ve got a Market Basket in my town here in NJ, and there aren’t about saving your dollar! NY strip for $23.99 a pound! Best food you’ll eat, but it’ll cost ya! Lol. Rotor hats are much much better in black!
I hear ya. Meat is usually pricey there but most other items are decent
Dang chris i was hoping for yellow on the calipers 🤦🏽♂️😆
Going to put windshield wipers back on it?
Great video, love the car.
They are in the trunk lol
The center council agrees with your statement on center consoles
Council on Center Consoles concurs
@@ChrisSullivan69 QUITE RIGHT
I think you have a fake lucky winner on here Chris.
👍👍
Chris, do you like that shift knob? I think a pool ball (either 1 or 9 ball) would look so much better in that interior. It would add a splash of color too. I have a 2 ball in my mustang that matches my secondary color blue. I got it from Twistedshifterz. Love the build man 💪🏆
🤘🏻🤘🏻
I have a decal overlay on the factory boost gauge tear shows 15 and 20
Wow
The Cobra is really cool. Need some work on those quads and calves...
Maybe it's just me, but the Cobra sounds like it has a serious exhaust drone at cruising speed? Also, maybe add some valve stem caps? Otherwise, great car presented in an excellent manner, as usual.
Small amount of drone, and yes I need to install the valve stem caps lol
Its amazing the skills and passion you have for working on cars bro! I subbed to your channel man! What did you do to the yellow cobra sell it? Wish I had money id make you a offer.
Yes it is sold. Thanks!
112 in Vegas 115 tomorrow
What's up chris big dog I see you out pushing that stang today😊
Hey Chris, great video! Loving the Cobra content which leads me to my question… Are you going to sell that beast? I really wanted to try & score the Cadillac V1 but when I was ready to reach out it appeared you had already let her go. Anywho, thanks again for the great content and if you do decide to keep the Cobra, I totally get it. Cheers from CT!!
Not sure what the plan is yet. I sure love driving it haha. It won't be cheap if it does go for sale!
Roger that. And it not being cheap I also totally get! Damn I miss my 99’ GT vert’ and 01’ GT coupe. The next step at that time was a Cobra but…. life happened. Cheers again my friend!
I'm in N.E too. Rain rain rain. Toys are sad
Instead of the boost gauge, why not do the boost overlay in the cluster? Looks factory and clean.