Twisted Hobbys - Veloxity/Edge 540XL - Build & Maiden Flight
ฝัง
- เผยแพร่เมื่อ 28 ก.ย. 2024
- Build process for Twisted Hobbys Veloxity/Edge 540XL. A great how to assembly with tips and tricks! Any suggestions for what you'd like see with these build videos, let us know!
Get your Veloxity, Power Combo, and Transmitter here! www.twistedhobbys.com
Binding and ESC Calibration Video • Receiver Binding and E...
Building Supplies and Materials Video • Tools and Building Mat...
Love these videos!!! Keep them coming please!!!
More to come!
Another awesome build video from our team member Jim Goodwin. Both the Veloxity and Edge XL are very easy to put together by even the novice builders. Such an awesome model! We are wishing everyone an enjoyable build with hundreds of amazing flights to follow, enjoy!
Thanks for the video... It re-ignited my excitement for this plane as mine was just sitting in the garage... Just did 2 successful flights and love it. What prop are you running? I'm running 3S 2200mah so far... Thanks!
Jim most likely us using the stock provided prop in the pc which is APC's 12x4.6MR
Really helpful for my laser xl build. Thank you! Could I ask, how did you do the battery strap to stop it from damaging the foam?
I usually start with a double sided velcro about where I think I will place a permanently cut slot. I attach the velcro by cutting two horizontal slots through the vertical fuselage and feed it through. This allows me some time to adjust the CG until I settle on exactly where I will have a permanent cutout for the battery.
Nice one! Good to see the build process
Glad you enjoyed it
A great video
Great video. What is your timer set for with that 2200.
It's at about 6 mins with pushing it pretty hard.
hi, quick question., for my edge 540, do i need to do the balance CG inveterted or normal position? thanks guys
You can. Wings are symmetrical and no dihedral so you can check cg upright or inverted.
Thanks, very helpful information
@@TwistedHobbysIncChannel
Can't seem to get the CG right ton mine.
could be something small like you thrust angle off a little causing a different angle of attach depending on the speed. Would do a downward decent with out power to see what why she pulls. Give a look at our CG blog for reference. twistedhobbys.com/blog/how-to-set-center-of-gravity-on-twisted-hobbys-rc-airplanes/