I loved this design so much that I have now used the method to create my own styles, some with pretty seed bead picots, some with tear drop beads, and others with various types of beads - like small rectangular Gemstones, longer Sterling Silver Tube beads or Trapezoid beads in place of the bicones - but I still have yet to use Pearls. My go-to favourite is one that I kept for myself, done with round and rectangular beads in Azurite and tiny Stirling Silver beads - I wear it with everything! No two are the same, they work up quite quickly, and they've all been well-received as gifts. It's such a versatile design that works every time so long as the two sizes of beads at top and bottom are used to produce that curve. Thanks so much for kindly sharing this design with us! I'm eternally grateful, as are my friends and family who've received them as gifts. THANK YOU! EDIT: I'm right in the middle of making another one with the two sizes of round Turquoise beads (3mm & 6mm), Red Coral and Brass seed beads, and gorgeous handcrafted 15mm-long tubular Brass beads inlaid with Turquoise and Red Coral in place of the bicones, and with 3mm Hand-Engraved Brass beads for the nacklace section on either side which is sprinkled with a few matching 8mm round handcrafted Turquoise/Coral inlaid Brass beads - IT'S SPECTACULAR!!
אני אוהבת אותך מאוד מאוד. ועל היצירה שלך המקסימה הזאת. מהממת עדינה ומושלמת. ואני עושה אותה! הרבה והמון הצלחה בהמשך. ולא לשכוח שיש כאן מישהיא שאוהבת אותך ואת כל היצירות שלך...רק חסר משהוא כאן...מדוע אין אפשרות להעלות לכם תמונה שתוכלו גם לראות, איך אנחנו עושות זאת...מלאה אהבה. ❤❤❤❤❤❤❤❤❤
This is beautiful. Please could to do a little section again. Your hands are too low on the screen. I can understand what your doing as I've done a very simple one. But would be nice to see full screen. Ghana you.
Thank you for your tutorials. Made many of your patterns. One thing would be useful is to add the length of wire we need. Couple of times I had to attach new threads and it is not always look good when you attach a new thread in the middle. So it would be nice to have the approximate length we need
Hi Sweetheart, I hope that I can help you... I cut 6 metres/yards off my spool of 'Nymo D' thread, which would obviously be ridiculously too long to work with if I tried to start at one end and get to the other! So I almost always slide my first 'unit' of beads to the middle of the the 6m/y thread (with a stopper bead FIRST) and begin weaving from the middle of the necklace, as I then only have 3 metres/yards of thread to work with which is much easier than having to finish and start new thread. When I get to the end of my piece I weave my clasp into a circle or drop shape (so I don't need to use jump rings to attach it later and reinforce it several times), then I turn the whole piece around and weave the other side of the piece from the middle again (but remember to remove the stop bead!), and then I do the same thing with the other end of the clasp. I usually have a good bit of thread left to weave back in to each end rather than just tying a knot and cutting at my 'clasp circles' - and then there's often some left over - but better too long than too short. I do the same with bracelets and any pieces where a lot of thread is needed. I hope I've been clear enough and it makes sense. Good luck with your project! PS: Nymo D Is a specialised beading thread and should be available at any good beading store or on Ebay. It comes in a wide range of colours but I've found that I mostly use 'Smoke' because it disappears into the beadwork but if I'm doing a black or white piece then I use black or white accordingly. BUT.. I heard that when doing multiple passes through the same beads you must be careful not to pierce the previous thread/s, but I've never had any problems with that. It's my go-to thread for everything, and comes in little bobbin size rolls (of 64 metres/yardsl and in very large spools. I keep a range of colours in the the bobbin sizes, and buy Smoke, Black, and White in the huge spools.. I think they're 1000 metres and last for YEARS - and I do a LOT of bead-weaving! Best wishes.
hi...this is a necklace. pls watch the tutorial ..I dont know how much thread do you need, I always add more thread by making a knot because it wont be seen -it will get hidden through the beads, I dont like to work with long thread.
Bonjour, je viens juste de terminer ce magnifique collier. Il est superbe !!! Je remercie la personne qui m'a donné la chance de faire ce tuto. On en veut d'autres :)
It’s so beautiful I love it but there is only one thing to make your videos even better it to show us all the beads you will use at first so we know exactly what you will use and so we could buy them and try to make your beautiful necklace
I had being trying your necklaces but something happen to me ,when I tryed to kneat all the pieces with the thread got me loose ,perhap is cause the thread that I use is too thin,I use # 15 miyuki .my question is, it can be used nylon thread instead of miyuki's.
beautiful necklace,but the bicone is not very visible in the background job, and so cool , I wanted to make this necklace but it is not clear if repeat with bicone, thank you
Ciao molto bellaaaaaa. Nn avendo bicono in casa, in alternativa posso usare i cipollotti?? Grazie se mi risponderai. Un bacione grande ❤️ ❤️ ❤️ ❤️ ❤️ bgiornata
Are you using regular sewing thread for this? I want to make this this weekend but, I’m scared it would fall apart after wearing it a few times using thread alone
Then the wire shows. Wire is metal. I will try fishing line again. That is invisible but with 2 needles it is difficult to work with. It curls. I'll try my plastic pliers and try to straighten it out.
I use 'Nymo D' for EVERYTHING. It's available at any good bead store or on Ebay. It's a specialised beading thread that doesn't need conditioner (but sometimes for necklaces I pull it over a bar of waxy-type homemade style soap made with natural oils, like lemon myrtle or orange oil, (because I live in a hot and humid region and it protects my finished pieces from sweat) but don't use too much or it will clog up the bead holes. It also helps to keep knots to a minimum and is much cheaper than buying a thread conditioner!) It comes in a wide range of colours and two roll sizes: bobbin size which are 64 yards or big spools which are 1000 yds. I only buy the big ones in Smoke, black, and White, and always keep a range of colours in the bobbin size, because I find that the Smoke generally blends into almost any colours of my beadwork except when using black or white beads. I rarely have used anything else!
length=15.5 inch (40 CM)-without clasps 46 pearl beads (6mm) 56 gold beads (4mm) 28 bicone beads (4mm)-black 29 pearl beads (4mm) If you have any question please feel free and ask !!!
If you wish to watch these tutorials ,you must pay close attention and write down the directions all of them or you will keep coming back to watch them Anyway the tutorials are just above where it says ( DIY jewelry projects ) click on the part that says beading tutorials and it will take you there good luck !
I loved this design so much that I have now used the method to create my own styles, some with pretty seed bead picots, some with tear drop beads, and others with various types of beads - like small rectangular Gemstones, longer Sterling Silver Tube beads or Trapezoid beads in place of the bicones - but I still have yet to use Pearls. My go-to favourite is one that I kept for myself, done with round and rectangular beads in Azurite and tiny Stirling Silver beads - I wear it with everything! No two are the same, they work up quite quickly, and they've all been well-received as gifts. It's such a versatile design that works every time so long as the two sizes of beads at top and bottom are used to produce that curve.
Thanks so much for kindly sharing this design with us! I'm eternally grateful, as are my friends and family who've received them as gifts. THANK YOU!
EDIT: I'm right in the middle of making another one with the two sizes of round Turquoise beads (3mm & 6mm), Red Coral and Brass seed beads, and gorgeous handcrafted 15mm-long tubular Brass beads inlaid with Turquoise and Red Coral in place of the bicones, and with 3mm Hand-Engraved Brass beads for the nacklace section on either side which is sprinkled with a few matching 8mm round handcrafted Turquoise/Coral inlaid Brass beads - IT'S SPECTACULAR!!
Would love to see your designs!
Was looking for a different technique for making bracelets. I just love your bracelet tutorials and its not as complicated as it looks. Thanks
Very nice💞
Thanks 🤗
Вы делаете изумительные вещи! Это шедев!!!❤🎉🎉🎉🎉❤❤❤❤❤❤
Beautiful necklace thank you for sharing
You’re welcome 😊
אני אוהבת אותך מאוד מאוד. ועל היצירה שלך המקסימה הזאת. מהממת עדינה ומושלמת. ואני עושה אותה! הרבה והמון הצלחה בהמשך. ולא לשכוח שיש כאן מישהיא שאוהבת אותך ואת כל היצירות שלך...רק חסר משהוא כאן...מדוע אין אפשרות להעלות לכם תמונה שתוכלו גם לראות, איך אנחנו עושות זאת...מלאה אהבה. ❤❤❤❤❤❤❤❤❤
Hi judith...what picture...what is your FB I can send it to your FB address
Super I will try
Fantastique ❤
Thank you
Çok çok güzel olmuş eline emeğine sağlık👍👍👍👍🌹🌹🌹🌹🌹🧿🧿🧿🧿👏👏👏👏👏⚘⚘🙏🙏😘🤩🥰🙏🙏🙏🙏🤲🤲🤲🤲🤲🧿🧿
V v v niceee dear love from pakistan
thank you Khan!
Good 👍
Хотелось бы с переводом. А так изделия получаются красивыми. Но у каждого свой вкус. Спасибо за ваше мастерство
I always glue the knot before placing the bead tip. The necklace then lasts longer.
you have the most beautiful beading channel, thanks
This is beautiful. Please could to do a little section again. Your hands are too low on the screen. I can understand what your doing as I've done a very simple one. But would be nice to see full screen. Ghana you.
Sooo nice madam.. What type of thread u have used.. Plz let me know.. I don't have any idea about this but I loved your making so I want to try once..
wildfire
Amazing great 👍
This is very beautiful, thanks for the tutorials
Thank you for your tutorials. Made many of your patterns. One thing would be useful is to add the length of wire we need. Couple of times I had to attach new threads and it is not always look good when you attach a new thread in the middle. So it would be nice to have the approximate length we need
i never measure the thread. Im working with regular sewing thread (not wire).
Hi Sweetheart, I hope that I can help you... I cut 6 metres/yards off my spool of 'Nymo D' thread, which would obviously be ridiculously too long to work with if I tried to start at one end and get to the other! So I almost always slide my first 'unit' of beads to the middle of the the 6m/y thread (with a stopper bead FIRST) and begin weaving from the middle of the necklace, as I then only have 3 metres/yards of thread to work with which is much easier than having to finish and start new thread. When I get to the end of my piece I weave my clasp into a circle or drop shape (so I don't need to use jump rings to attach it later and reinforce it several times), then I turn the whole piece around and weave the other side of the piece from the middle again (but remember to remove the stop bead!), and then I do the same thing with the other end of the clasp. I usually have a good bit of thread left to weave back in to each end rather than just tying a knot and cutting at my 'clasp circles' - and then there's often some left over - but better too long than too short.
I do the same with bracelets and any pieces where a lot of thread is needed.
I hope I've been clear enough and it makes sense. Good luck with your project!
PS: Nymo D Is a specialised beading thread and should be available at any good beading store or on Ebay. It comes in a wide range of colours but I've found that I mostly use 'Smoke' because it disappears into the beadwork but if I'm doing a black or white piece then I use black or white accordingly. BUT.. I heard that when doing multiple passes through the same beads you must be careful not to pierce the previous thread/s, but I've never had any problems with that. It's my go-to thread for everything, and comes in little bobbin size rolls (of 64 metres/yardsl and in very large spools. I keep a range of colours in the the bobbin sizes, and buy Smoke, Black, and White in the huge spools.. I think they're 1000 metres and last for YEARS - and I do a LOT of bead-weaving! Best wishes.
Which thread did you use ?
Is it normal.thread or nylon
wildfire, nylon, fireline, cotton thread
Thankyou
For this tutorial how am I supposed to add thread if the thread is almost at then end?
Very beautiful..
היי יצרתי את נשרשרת בדיוק זהה לשלך. ואני אהבתי מאוד עדינה מרשימה ומהממת. יצירה נפלאה. מה שיוצא מהלב נכנס ללב. ❤❤❤❤❤❤❤❤❤❤❤❤❤ המשך הצלחה רבה!!!
Thank you my friend
How much thread do I need this is a pretty bracelet and can be turned into a knecklace
hi...this is a necklace. pls watch the tutorial ..I dont know how much thread do you need, I always add more thread by making a knot because it wont be seen -it will get hidden through the beads, I dont like to work with long thread.
Thank you I did go back feel a little silly I love the knecklace apologies
This is so pretty. I love it
I love your tutorial; you show how to do each step
Nice and easy to make. Thanks for sharing.
Nice😍😍
Thanks 🤗
Bonjour, je viens juste de terminer ce magnifique collier. Il est superbe !!! Je remercie la personne qui m'a donné la chance de faire ce tuto. On en veut d'autres :)
avec pleasure !
Super very easy to learn thank you so much...
Thanks .Nice mala
It’s so beautiful I love it but there is only one thing to make your videos even better it to show us all the beads you will use at first so we know exactly what you will use and so we could buy them and try to make your beautiful necklace
Ok, thank you
I had being trying your necklaces but something happen to me ,when I tryed to kneat all the pieces with the thread got me loose ,perhap is cause the thread that I use is too thin,I use # 15 miyuki .my question is, it can be used nylon thread instead of miyuki's.
wildfire 0.15 mm , or ... maybe nylon thread will be ok
Very beautiful and easy to make. Thanks.
So beautiful and very easy
Beautiful
I will. Make this neck set very beautiful
Lovely design...Ty for the tutorial... I made this too ...a mini version tho and it came out welll ☺
Very nice
So cute nice beautiful Love it !
!Qué diseño tan fino y elegante!😗😙😍Mil gracias!
beautiful necklace,but the bicone is not very visible in the background job, and so cool , I wanted to make this necklace but it is not clear if repeat with bicone, thank you
Beautiful. That you
Thank you so much. This is a beautiful choker.
Too good. Thanks for the tutorial
Thanks for your kindness 🌹
I just made this necklace and it is beautiful. It's so elegant. Do you have any more ? It was fun to make.
1111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111¹111111111111111111111111111111111111111111111111111¹1111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111¹11¹111111111111111111111111111111111¹¹¹11111¹111¹11111111111111111111111111111111111111¹1111¹111111111111111111111111111111111¹1¹1111111111111¹1¹11111111¹1111¹¹¹¹¹¹¹¹¹¹¹¹¹¹111111¹111111111¹¹111¹11¹¹¹¹¹1¹¹¹
Realmente una hermosura!! Muchas gracias por compartir un trabajo tan lindo!!! Le mando un gran saludo desde Argentina
This is sooooo preety 😍😍
Can I know which thread did u use
nymo...or regular sewing thread or any other beading thread
Where can I buy these hooks
online , aliexpres, potomacjewelry beebeebeads, etsy, ebay,
Very lovely beads
Thank you for sharing , beautiful ❤️❤️❤️❤️❤️
Praise p
Beautiful!
Ciao molto bellaaaaaa. Nn avendo bicono in casa, in alternativa posso usare i cipollotti?? Grazie se mi risponderai. Un bacione grande ❤️ ❤️ ❤️ ❤️ ❤️ bgiornata
Ciao Monica , si , puoi usarli cipollotti per questa collana...BACICONE per te !
@@beadingtutorials Grazie milleeee carissima. Sei stata gentilissima. Un abbraccio da molto lontano. From 🇮🇹
How many beads to makes this necklet
Where we have to brought that beads send me the link
aliexpress.com or etsy.com or potomac beads
Are you using regular sewing thread for this? I want to make this this weekend but, I’m scared it would fall apart after wearing it a few times using thread alone
i used regular sewing thread...(doubled it !!!)
Thanks for this Video. I want to also start making these at home. please help me details on from where to get the beads please. thanks.
aliexpress.com pr pandahall.com
Beautiful necklace. How long did you measure thread?
it doesnt matter the length of the thread . you can add more thread by making a knot , it will get hidden through the beads and you wont see it !
have you tried using silver beads in place of gold beads? I'm real excited about this choker. It's so pretty
no but i can try making it with silver beads
Score Der @
@@beadingtutorials ' s
Wawwww very Nice
ဪဇာသိး
မမ
api sutat bodole rog use kora zave?
AMEI ESTE COLIRIO ESTOU FAZENDO, ELE. OBRIGADA. ELE É ELEGANTE.
Very simple and nice
Can u make earrings matching to the necklace plzzz?
You are the best thanks
Beautifully thank you very much my friend.
класно
Awesome
Nice nice
thank you
Very pretty necklace
Muy bonito.gracias.
Very pretty thank you
I love your projects but I always have thread showing and that makes it look cheap and "homemade". Any suggestions?
+Denise Winant use beading wire
Then the wire shows. Wire is metal. I will try fishing line again. That is invisible but with 2 needles it is difficult to work with. It curls. I'll try my plastic pliers and try to straighten it out.
Thread name plz
Wildfire 0.15mm
Deluxe ♛ 💍 🌼
what kind of thread is used ?
regular sewing thread
I use 'Nymo D' for EVERYTHING. It's available at any good bead store or on Ebay. It's a specialised beading thread that doesn't need conditioner (but sometimes for necklaces I pull it over a bar of waxy-type homemade style soap made with natural oils, like lemon myrtle or orange oil, (because I live in a hot and humid region and it protects my finished pieces from sweat) but don't use too much or it will clog up the bead holes. It also helps to keep knots to a minimum and is much cheaper than buying a thread conditioner!) It comes in a wide range of colours and two roll sizes: bobbin size which are 64 yards or big spools which are 1000 yds. I only buy the big ones in Smoke, black, and White, and always keep a range of colours in the bobbin size, because I find that the Smoke generally blends into almost any colours of my beadwork except when using black or white beads. I rarely have used anything else!
Класс❤❤🎉🎉🎉❤❤❤
Thank you
खुप छान आहे मला खुप आवडले !
Вы нитку доращивали?вначале видит концы нитки были короче,а в конце ещё обрезали.сколько метров надо брать? .спасибо
это не имеет значения, как долго это нить ... вы можете сделать узел, который он не увидит
Super
So beautiful, thks
Wherw do you buy the swarovski ?
aliexpress.com
Su video no tiene sonido el collar esta precioso
ioi bine ca mi-ai spus ca nu stiam ca nu are sunet....tontoneta care esti !
Muy bello amiga tus manos increibles saludos y felicidades!
Beautifull l like that
Holaa ke fino y ke precioso te ke do es muy bonito ,,,,saludos
💖💖💖💖
thx Rachel . LOVE!
AAP thread kon sa use karte h
😄😉😁
OK this begs an obvious question. How many of each bead do you use, and how long is the resulting necklace ?.
length=15.5 inch (40 CM)-without clasps
46 pearl beads (6mm)
56 gold beads (4mm)
28 bicone beads (4mm)-black
29 pearl beads (4mm)
If you have any question please feel free and ask !!!
Onde eu encontro esses matérias
thank you very much for your attention
nyc one but video not clearly visible
Needle size plz
size 12
B R A V O!!!
Very elegant
👍😉
Couldn't watch the assemble properly
If you wish to watch these tutorials ,you must pay close attention and write down the directions all of them or you will keep coming back to watch them Anyway the tutorials are just above where it says ( DIY jewelry projects ) click on the part that says beading tutorials and it will take you there good luck !
Where can we buy these materials plz send it
jewelry stores, online(aliexpress,com, www.potomacbeads.com/, www.pandahall.com/wholesale-jewelry-beads/2.html
any many other sites....google them...
No se ve cuando mete las piedras negras conlas perlitas esta muy bajo su mano
Sema 😎
Esta hermoso pero no se ve cuando se hace el cruce