In my college we have a kuka industrial robots with different different payload which is used for only training fir students under AKGEC SKILL FOUNDATION
Sir can you provide industrial drawings because in colleges they provide very low level of drawings which is not good enough to Crack any interview in design field
Your video title is not true. iACE in Gandhinagar, gujurat has two robots of fanuc, one of which is a 7 axis robot (spot welding robot) and the other which is a 6 axis robot and complete training of these robots including roboguide is provided here.
Hello sir Good afternoon This side Shivam anand Sir actually I m diploma holder And I already work done in yaskawa mig welding robot .and I hve 1year experience about yaswaka robots So can I get job regarding robots With you 🙏
Wow sir I have never seen before like this and after watching this I am feeling proud to be in engineering field
In my college we have a kuka industrial robots with different different payload which is used for only training fir students under AKGEC SKILL FOUNDATION
Maine bhi wahi se sikha hai😂😂😂
Recently I am joining the robotic programming training in Pune. I am operate same robot in Pune.
All the best!
Sir apne kaha se kia
9 years ago i was done robot teaching on Panasonic robot
Sunwell Controls & Automation
PLC PROGRAMMER, ROBOTICS & SCADA SYSTEMS.
Hanzhen harmonic drive gear ,
strain wave reducer, over 30 years experience
Robotic continue video please sir
I want to know if you can help I have a robot and a table to weld... side 1 and side 2 why does my robot not turn and weld the same thing
I seen the yaskawa flex pendant or tech pendant.... Basics
Robot is good for future
Studwelding hhi to hoti hai is set or dress pack iska properly arranged ni hai
Sir esme kon si motor ka use hota hai aur kitne axis hote hai
Sir aap bhut अच्छा सीखा रहे हो लेकिन हर चीज के बारे में बताए sir uska handle kaise चलाए सब कुछ 🙏🏻
okay next time will do
Dear sir please upload touchup video for fanuc robot
not only one we are manufacturing in punjab Ludhiana
This is an old video
Sir can you provide industrial drawings because in colleges they provide very low level of drawings which is not good enough to Crack any interview in design field
Tesla uses kawasaki robots. Not fanuc and how will you set the different configuration of robot
Congrats
Dear sir, pls you have to tell me about reverse position id in robot edit command.
Sir ek video program banane ki vi banao
Your video title is not true. iACE in Gandhinagar, gujurat has two robots of fanuc, one of which is a 7 axis robot (spot welding robot) and the other which is a 6 axis robot and complete training of these robots including roboguide is provided here.
This video is old. And ours is a private institute. There is no private skill development centre which teaches at our level.
th-cam.com/video/NMzy63T4404/w-d-xo.html we have been doing this for more than a decade at Bangalore and at our customer location.
I also want to learn.... Fanuc robot
Why people will learn Fanuc programming if there's no robot in India?
Fanuc given all training its all all products..
Sir how can I learn robot programming??
Sir isko sikhne ke baad placement milta hai our salary kitna tk milta hai sir
sir design are possible in solid works software and also i want to learn robotics design
Or course kitne dino ka hai
Sir ,apka training institute ,where r
Robot milling setup training..?
CTTC BHUBANESWAR MAY hy Sir
Who many programs your centre
Sir mujhe offline dekhna hai robotics
Ye Trainig K liye kiya qualification chahiye plz bstaaye
make the robot write on that whiteboard with a pen. (without springloading)
Sir a se z tak chane ke bare me
Sir mere ko robot ki puri jankari Leni hai kya aap mera help kar sakte hai
Sir hamar instute m hai lekin abb irb 2600 model number ka h
Chalane to nahi dete par kisi ko baaki institute mei
Sir do you have any other branches in different cities
Kya robotices engineer fanuc me ja skta hai ?
Wher is the Training center? Please send location..
Hello sir fees kitne hai or traning centres kaha pe hai
this robot is in my college
Hello sir I want to fanuc ROBOT training and after job
Sir pune me branch hai kya
Modal number Kya Hai sir iska
👌
I'm Jr Robotic Operator and programmer
I need Job
Sir. If I learn CNC VMC and this Robot 100% is it good for my future. I am confused please help me Sir.........🙏🙏🙏🙏🙏
yes it will be so beneficial for counselling contact Akshit Makhija 7722047855
Dear sir kha hai aapka tranning centre
Faridabad, Delhi, Gurgaon and Bangalore
Sir please bataiye n fee kitna hai sikhne ke liye
what are the course fees,And time
Mahindra me h. Me Sikh rha hu
Tata IIS ke pass hai
Wow! Sir how much does this cost? 😮
65L to 75L
Location kha hai apki
Sir kya iski programming seekhne k baad koi placement hoga , or agar hoga to kitna tak ka expected package mil sakta h
Haha ghnata job lagegi isse programming free hai sikni but job hai hi nahi isme
You're right bro.....if there's no fanuc robot in Use in India, then why and who'll waste money on training
Hello we are gold medalist in state skill Compitation for robotics system integration skill now we are participating in India skill can you train us.
Sure
@@RVMCAD_Innovate share your contact details
@@RVMCAD_Innovate please share your cont details
As soon as possible
Hello sir
Good afternoon
This side Shivam anand
Sir actually I m diploma holder
And I already work done in yaskawa mig welding robot .and I hve 1year experience about yaswaka robots
So can I get job regarding robots
With you 🙏
Sir yaskwa robot ka Kahi training center hai
Your address and full information in robotics
क्वालिफिकेशन क्या होनी चाहिए इसको सीखने के लिए 🤔
CAD Design - 12th Pass and above
CNC VMC Programming - Same
Robotics - Diploma or engineering
@@RVMCAD_Innovatebca mscit?
Mechanical engineering diploma/bitech
Konsa Engineer inski program krta hai
Sar AAP ke fes keya hai sar padai ketnehona sar
Call at 7722047855
Fee kya hai
🎉🎉❤❤❤
Sir m 12th pass hu kiya m ye Trainig kar skata hu
Is this build in India?or just programmed here
Build in germany I guess.
the assembly will be done in India , but the parts manufacturing is done in Japan
Fee kitna hai sir robot sikhne ke liye
Sir fee kitni h
Hamare collage me. Hai
Great!!
pune me branch hai sir
not now, soon
Kuka wala robot lao 1-3 crore ka paregi
Sir offline class kab se shuru hongi
As soon as we get permission
@@RVMCAD_Innovateok dear sir I'm waiting
What are the Course fees????
Depends on which course. Call at 9999931777 for details.
Course Fee is Rs. 25000/- for MIG welding, Spot Welding , Handling tools and PLC programming.
15000 /- chakan Pune Maharashtra
It is pronounced as Fa-ni-c, not Fa-nu-c.
But sir this technology increase unemployment.
And increase accuracy
Sir
Aap chalana sikhaya ga
Aap na number send Karo
Sir mera 10 or 12 pass ho Gaya hu iti kar raha hu koi help kariye sir muje sikhana hai sir plese
Name Manoj Kumar
Sir message kijeye
Sir offline training deta hm