TRUE Bridge Mode? Your ISP keeps this a secret. (Gateway Router Setup)
ฝัง
- เผยแพร่เมื่อ 23 ก.ค. 2024
- True bridge mode, the best bridge mode router setup on your ISP gateway modem router. Here's how I did it...There are several ways to set up "Bridge Mode" on your ISP gateway - but very few people know this method... This Bridge Mode essentially turns your ISP internet router gateway into an enterprise-like modem
the context of this video is for educational purposes and how changing certain settings on your internet provider gateway can help you use your own router with less issues! - วิทยาศาสตร์และเทคโนโลยี
You should open an ISP and serve the whole world with true honest fiber broadband.
Billionaire goals
Be perfect for those live in Rural or Farm Areas cause my isp Bravado Wireless is ok but my xbox shows 5mbps download june 8 2020
I recently got a TPLINK archer AX1500 Router hooked up to my main LTE modem bec 6300nel Ridgewave R15 it wifi gotten worse over time
Does this allow you to change your Ips incase of a ddos attack i recently switched from spectrum to ATT and spectrum allowed me to change my ip with problem
"Glasscock Network"
@@FrenzyBoi I can't believe my comment got 90+ likes.Why I have not been notified??
There are many "bridge mode" router setups that i've tested and this is by far the best and closest you can get to true bridge mode. Unfortunately, it is not free. But, it turns your ISP gateway into an enterprise modem capable of assigning more than just one public IP - which is awesome. I'm very happy with this setup.
(edit) P.S. This video did not hit sub boxes
i got it weird but great video :)
glorious
@@barneyfife7208 where's your video then?
What do you mean when you say that the video does not "hit sub boxes"? Thanks.
Hey jhon and viewers. I have a question, my internet is 400mpbs download and 40upload, but on my PS4 pro it sets to 50mpbs download and 4.5 upload... How can I fix this?
I work for an ISP like that and I love that, cause i feel confident about it, i love tech support and IP work even though I learned it how i went other ITs and Engineers and L2 and L3s a lot of them dont want to learn something new
If I'm still using a wired connection for my pc, would I still plug that directly into the gateway?
Has there been an update on att configuration/settings because I don’t see the same things that you describe in your video. I have a BSW210.
Good to see you got it working perfectly. As I know this was a bit of a hassle for you previously.
yeah that's because all the other options are not good, too many issues
Appreciate the knowledge, i got my Static ip block but can i use that static ip i paid for 2 weeks from now when i get my xr700 even tho Frontier is comin tomor to install my internet...?
This is cool, I think since you’re having success with your setup it would be cool to see how you have your Pace configured as far as all of the settings are concerned internally. Not just specially the “modem only” mode. I have issues with ATT dropping my signal completely at times, I have a Nighthawk AX12 sitting behind my Pace 5286 and the WiFi improvement is 1000% better but my fiber 1Gb connection is still wonky at times even though any time I do a true Speedtest from the modem I’m getting around 980-995Mbps at all times ...
Thank you so much for this video. I will be using it a lot this week as a guide (just scheduled an install date for Gigapower thru AT&T on Thursday). I will attempt to use this setup -- please wish me luck! 😄
Welcome to the bittersweet world of fiber. Good luck!
John Glasscock Thank you.
This is all super helpful! Would all of these this to be done if I bought my own standalone modem without the router combined?
Question is, does this method provide an IPv6 connection? Does IPv6 tunnel through the IPv4 static IP from ATT?
Used this when I first installed eero with AT&T Fiber. Wondering if this is the same if I move to Google Fiber? Thanks much.
John, do you think there are hidden settings that get activated/turned off on the att backend when you get a static ip vs the dynamic one? From what I see, the static is very similar to the dmz+ mode, but I’ve tried that and some devices go through and others like my tv and ring alarm do not, I finally set it up as just two separate network ranges and limited the att router to 1 address range and seems to be working for me, but was just curious if everything that wasn’t working for you on the dmz method is working for you on this way of doing it? Just debating to opt for the 15$ to find out it still works flaky, no guarantee, just looking for your experience with both methods. I’ve watched your other videos so I take it this way is actually working for you...
Good evening John!
Will this work with my att BGW210? I recently purchased the nighthawk xr500, I would like to set it up. I have att fiber 1000mbps and I would like to utilize it how is suppose to.
As long as the "IP Passthrough" function that is available on some of the ATT Gateways shows successful trace routing over IPv4 and IPv6, wouldn't that method be sufficient? I know the "DMZ" mode on your model doesn't actually allow IPv6 passthrough, just want to know if the "IP Passthrough" function works better than "DMZ"...thanks
Yes most efficient. That’s what I use, ip pass through and disable all filters and security options on att gateway disabled
Thanks. I also have ATT and just ordered the 8 (5 usable) static IPs for an additional $15. I have their fiber 1,000 connection. Does this mean each wan port gets 1,000/1,000 or are they split up? five one-gigabit connections--that would be too good for +$15
ATT has scheduled a tech to come out. I assume the reasoning is to swap my gateway from bgw200 to the Pace 526AC. Maybe not.
Great video. Thanks for this!
Hi,
I just purchased the block of addresses from AT&T , i got my ASUS router working with one of the addresses. Now my challenge is getting open NAT on both my xboxes. one is hard wired and the other is in a room on 5ghz wifi. i was wondering if it was possible to keep one xbox on the asus routers network and place the wired xbox behind the ATT R/G, and if so whats the proper way to set this up. ( i tried and kept getting a teredo error on the wired xbox). Thanks
Hello I know this's a bit old video, but I have a question, why don't you just disable DHCP on the Gateway and assign a static Wan IP on the 2nd Router?! Won't that work?
Do I need one for the router or one for each device connected to it? Also what do I ask my ISP for?
@John Glasscock so this is only relevant if you have a modem/router combo from the isp? My current setup is modem tp-link tc-7610 (i purchased) netduma R1 with netfear R7000 bridged off netduma. I have spectrum 200 down 10 up. My base ping from ping plotter is 17ms. I'm interested in this buying a block of static ip's. But I'm guessing that it won't help me cause its for bridge mode. Just want to make my connection better for gaming cod blackout if at all possible!
Can you have the full features of the third party modem? I just bought an XR500 and is super hard for me to get it work properly. I have it now as AP mode which does not allow me to use GEO filter. Please, help! My ISP is Bell.
Got a question John. Wanting to know if this will solve my problem. Sounds like it will. Great video and thank you.
Quick summary: purchased an asus router that would allow me to connect my vpn service on it. Trouble now is that I have a double nat on Xbox. ISP router doesn’t have bridge mode. I have tried passthrough but that doesn’t fix it either. Aftermarket modems cannot be used with the isp and the isp does not offer any simple modems without router capabilities. So if I call them back and am able to purchase another static ip from them (or five 🙄) should that solve my issue as far as you know?
Hey got a question with AT&T's fixed wireless internet, your IP is constantly changing which makes your NAT type strict and does not allow you to play online games effectively at all. This is because your internet is being pinged off a cellular tower. Would something like this allow me to keep a static IP address for my gaming PC so that I can have a better experience gaming?
If have the xr500 and att 1000. My speeds are cut in half. Will this process get me closer to those speeds?
I need help. I have CenturyLink fiber internet. I have the C3000Z, and I am trying to set up PPPOE. It's not working I got the login credentials tried doing transparent bridging and tried going straight to the Fiber ONT. Any suggestions? Do I need static IP's to do this?
I purchased a block of static IP addresses through ATT and I don't have that option on my router settings for public routed network.
I haven't done this (I may in the future), so you'll need to read the Help text off to the right side:
1) Look under "Home Network", "Subnets & DHCP", 1/2 way down, "Public Subnet".
2) Then also check "Firewall", IP Passthrough", 1st option "Allocation Mode"=Off. Change it to "Passthrough". Change other settings on the page as required.
3) Under "Firewall", check "Public Subnet Hosts". This will not display options until "Public Subnet" is turned ON, so I can't tell what this will do.
This is all more complicated than in this video, but looks a lot more robust - more feature rich. Good luck. If you get it working, please document for the rest of us.
Please help idk how to bridge mode with regular att i dont have u-verse
As always, great video... Is there away around AT&T pace gateway....Does anyone offer a seperate router and modem for fiber ?
I have a xr500 but I have to use my internet provider gateway, they can manually shut off the wifi and I can use it but I get a moderate nat.. any ideas
John, I guess this is the solution I am looking for, I have a consumer grade modem, I wanna setup my cisco soho router. If I setup bridge mode, would It bypass NAT to my Cisco Router in order I could configure my routing capability? Thank you so much
hello glasscock i need your help with not being able to select use public dhcp pool in lan dhcp , new device dhcp pool because when click the drop down its not there . also in lan settings advanced configurqation there is not outbound protocol config there to be seen on the page. how do i get to those things . HOPE THAT YOU REPLY I NEED YOU BRO!
hey john does it improve your connection? for online gaming?
i have rogers ignite arris xb6 modem with asus gt-ax11000. We pay for gigabit internet and would really love to use my own router. Will this method work? I feel the options in my modem settings are very limited.
So the business below my apartment allows me to use their internet. So they have a modem/router in the basement which is wired to a router on the 1st floor. I have a wifi extender in my living room to boost the signal. Would it be ideal to have them set up bridge mode. I’m getting 60mbps per second one day then the next it was hitting 320mbps. I reset the modem for them and it was working fine but I think I was getting double NAT. Any help would be greatly appreciated. Once the Comcast guy came my mbps dropped to 8 mbps.
att wants me to get business account inorder to get static IP.. im using a lte module in a wireless lte router for my internet.. i live in rural area...
i want to bridge / dumb modem mode, the LTE wireless router so that my Synology router does all the work.
any help?
My router isn’t popping up on the gateway it’s a NETGEAR nighthawk ac2300, connected it via Ethernet cord from the Ethernet cord on the modem router to the new routers internet port. I disabled the WiFi on att router and changed the DHCP and it didn’t pop up on the firewall tab any suggestions
Hi I was just wondering if bridge mode is absolutely necessary when getting a third-party router?
After researching routers to "bridge" with the NVG510, I've got a Motorola AC2600 and have been trying to find a video that will tell me how to connect them and disable the NVG510. I can only get as far as the IP address, which is the same as what you and everyone else says it is, BUT I see a very different interface. After trying to find the same screens and buttons, I give up! Any idea why the interface I am seeing is totally different (and way more complicated) than what you get when going to that IP address? Or any idea where else to look for instructions (please don't say "call ATT!) haha. Thanks in advance for any help!
Would you be able to provide a step by step on how to do the same set up on a NVG599
how can you access ISP's router throw pc connecting to netgear router with WAN IP?
Hey John I don’t understand when I put public network and I hit save thinking it’ll send the static ip straight to my xr500 it didn’t work it sent it straight to my computer I don’t understand why is it sending the static ip to my computer but not to my nighthawk
on my Gateway under firewall (advanced configuration) it only has the (enhanced security) section not the (outbound protocol control) section can you help me with finding it or show another way to get to the section. someone , anybody? thanks
Hey between cox and att? Is att the better route in terms of privacy, etc seems like it.. good video bro
nice explanation John
Hey John,
I have AT&T BGW 320-500 modem I want to add ASUS ZenWiFi AX6600 Tri-Band Mesh WiFi 6, I want to put the AT&T router in bridge mode. Can this be done so I can use the ASUS?
Hi, I would like to know how would I do this with Xfinity? I've tried everything and just want to know the best way of getting to this
my ISP has ZTE F668A modem/router. it only has the option to create a new WAN connection in Bridge mode to use my own router... My ISP does say that their customers can use their own router as main.
Can someone please help me I got a 50 feet cat 6 Ethernet cable for my ps4 the first week it worked fine no lag at all now I’m getting lag spikes any fixes or help
so all i gotta ask from isp is for a static ip?
All i wanna do is have the xfinity router/modem combo to work out in the living room and to use our new router we just bought in our bedroom.. we have the new router connected to the xfinity router/modem combo... we do not have a bridge mode.. the 2nd xfinity turns on bridge mode.. it shuts down all the internet.. we don't want to bridge it.. we want to use the one in our room for us 2 and the 3 people that use the xfinity combo router to run off of that with no troubles.... we keep getting disconnected from our server a lot.. especially when trying to play online games. Is there a way to keep these seperate without bridging? because as i said before.. bridging shuts down all internet and we can't access it until we call xfinity and have them turn off bridge mode.
How do I purchase the block of IP’s?
I have some questions about this type of thing an have been unable to get or find answers.
Wish there was a way to send emails with questions for this guy. I've watched so many of his videos that my mind is over filled at the moment. Lol
Thanks for Sharing
My business email is on my channel description and is only available on desktop view to cutdown on spam. You can send questions there if you have any
I have the same router with att and just bought a netgear nighthawk r7000. So you’re saying I have to call att and buy something? Please help
What are the pros and cons between this method and the IP Passthrough method?
I was enjoying wifi 6 via my Nighthawk router AX50 and all devices were flying too. Then, a couple of weeks later, nobody was able to connect to it anymore. A Cox representative bragged about something called "Beacon"; built into the newer Panoramic wifi modem/router. She said it eventually detects your 3rd party router and blocks it on your network. Is there a way to disable something like that; so we are able to still use gigablast internet? Even when I had their 300 mbps service, my router surpassed 300mbps on speed tests. Now. I am hitting 800+ out of 1000mbps (I'm not complaining about that speed. But I miss using the MU MIMO protocol for our household's barrage of devices.
damn thats fucked up, fuck cox
Disclaimer, not real tech proficient! I currently have a BGW210 with Orbi router and 1 satellite. I have an automated home with multiple hubs (Smartthings, Hue, Hubitat etc.) that have assigned fixed IP addresses that I want/must keep as is. The ATT gateway is 5+ years old and they have sent me a replacement 2Wire 5268AC. I really need this changeout to go as smoothly as possible so will this process be the preferred method of changing out the gateway? One more thing; I have a Synology NAS that when attempting to set up Open VPN, the NAS sees 2 routers and won't complete setup. Will this method take care of that issue as well? The VPN is of secondary importance but would be nice if I could get everything up and going during this change out. Any suggestions are appreciated!
Any ping or bandwidth improvement? Jitter and noise improvement??
I have a very nice Asus router I want to use, but my new ISP only offers a modem/ wifi combo. How can I still use my router with this until I get around to buying my own modem? I've searched around and have found little information on the subject. Also... what modem do you recommend for gaming... that isn't netgear bc I can't stand their customer service. Arris?
Is it possible to take a gateway wireless router and connect it to an ICS (Internet Connection Sharing) computer (192.168.137.1) to distribute wireless access??
Can a paid static ip be assigned to ps4 pro to forward ports . If so do a video on it. Thanks
Will I get charged more if I do this though? I’ve never seen anyone complain that they get charged more on their bill so I assume they don’t?
@john glasscock do i need a nighthawk s8000 to get a True Bridge if i already have a xr500 router?
No
Thanks! I didn't think so since the xr500 already have QOS in it.
John, I have a question for you. Could I just go into the settings and configure this after the installer leaves? Or do I need to call the ISP and ask for some kind of authorization to use a static IP? I'm aware that there is a fee.
Recoil Disruptor any answer? I’m getting fiber Monday and I have no idea how I’m going to set up my XR500
Hey John,
I have a question. I play with my Netduma R1 (which is to the Netgear S8000 connected) my multiplayer games - COD mostly... The Netgear S8000 is connected to my Modem (Fritzbox 7490 or whatever is it called). My first 2 to 3 games are fine, hit registration great, no problems. The Point is after those 2 to 3 games I have the feeling being always behind my enemies. Dying to quickly, getting barely kills, my aim seems to be completely off etc. This should not happen in my opinion. I have a gaming router after all which was not that cheap. Ok, I have no XR500 but still. My question is, how about buying a gaming Modem? Like Netgear CM600, Netgear Nighthawk X4S Modem/Router Combo, ASUS AC2600 Modem/Router Combo etc... Would this reduce my "bad online Experience" (lag compensation, getting always a first shot and then simply die...) ? By the way my Internet is not that bad. I have 100 down and 12 up.
Thanks in advance and keep up the good work man!
Peace!
Depends on your speeds. If you have fast internet I always recommend the CM1000 docsis 3.1 - with that type of setup you will not need the s8000 because there is no gateway only a modem and a router. Just make sure you call your ISP first to make sure they support that modem
Hey John, I jut cam across your channel and it is all very helpful information. I found your other video that says to use a network swtich nighthawk s800 for gaming purposes. What is a better option using your own router in bridge mode as you describe here or the network switch as detailed in your other video?
If you don't mind spending the extra money per month, the static IPs are better
@@JohnGlasscock I will check with my provider to see how much extra it would be for that. If I end up going the switch route, I'll be sure to use your Amazon link in the other video. Does one method have less latency than the other?
Can you do this on a wireless router. Do I need a modem and my virgin router?
Whats the difference between bridge mode and true bridge mode? I have bridge mode enabled on my PON and use my Asus router for DHCP and my ISP issues dynamic IP's. I dont need a static IP to set up bridge mode.
Bridge mode with att is broken
Can it be done by purchasing one static IP?
what i want to do is use my ASUS AX11000-GT as my primary router and my verizon quantum gateway as the secondary but I figure there is some port forwarding I need to do in order to keep my tv function (do not want to use moca adapter) i get tv via tivo with verizon fios media cards in them. One coax going to verizon router which i am sure is coming from ont
Do you have to purchase the static ip or no
Most ISPs will not lease you a static IP anymore unless you have a business account (we kinda ran out of IPv4 addresses a long time ago), FYI for anyone out there looking to do this. I only have a static at home because I got it 15ish years ago.
If I pay for one single static IP instead and manually assign that to the router would that work? Versus buying 5? For AT&T Fiber specifically.
You have to pay for them in blocks. I think the smallest block is 5 or 10
Does this fix/bypass the firmware issue with the 5268ac making any device going into DMZ+ only getting up to 50Mbps?
Yes, 100%. Dont even bring that up, so annoying. Idk why they can't fix that with a firmware update
Update they released a firmware update that fixed the dmz issue
I play video games and someone pulled my ip and ddos me is there a way i can’t change my ip i keep getting ddos
Can you do a new with you because AT&T website exchange appreciate it thanks
So do you use this and your xr500 for gaming or still use the s8000 switch? I have exactly same internet setup just looking to optimize
I currently rock this setup
@@JohnGlasscock do you feel it's any benefit over up passthrough?
I've got 2 xbox one console's and 2 ps4 consoles. I'm from the UK is this method the only way of setting them all up properly?
The statip public address can definitely help with the problem of obtaining open nat on two consoles
Dont you or the ISP provider place the Static range in their modem? That's how I see them generally. I usually place the range in them - then one by one - inside each device I connect directly to the modem- I statically assign them then plug them into the modem to pull the one I assigned.
if my coaxial cable end is rusty can that affect my game play because I'm getting my regular ping but my shots aren't registering on every cod I play
If it's bothering you, then you can always get a tech to your location to replace the cabling. As long as the inside copper isn't damaged it shouldn't be a problem. You can run a line quality test on dslreports if you want
@@JohnGlasscock idk why the line quality test don't work for me and the copper inside the coaxial cable is rusty because I have a spiltter to join the two ends
Hi john can you help me, acutely im from middle east and i always play fortnite at Europe server there is a way to chose ip or roots to lower the ping ?
My regards ♥️
if you play on PC yes, if on console you need a Netduma
John Glasscock console and i have Netduma but I don’t know how to use it
There’s away to connect fiber cable internet to xr500 directly without using two-in-one modem router combo?
Depends on your provider
Hey John Thank you for making this video. I cannot find a single video on the internet taking about this kind of bridge setup. however im still confused I actually want my isp gateway (router and modem combo) to act as a modem and then connect a router to it and assign a static public ip to that router. basically all the routing would be carried out by that router. can anyone guide me and tell me what to do
Did you ever get your answer? I'm looking to do something similar
Exactly right. You are basically replacing the ISP gateway's router function with your own third party router; leaving the gateway to function as a modem only. To do so, you must put the ISP gateway/router into bridge mode. The method outlined in this video is one way to do this. You turn off the WI-FI function on the gateway, eliminating it as a wireless router and making sure it can only be connected to downstream devices through its LAN ethernet ports. Then, connect your 3rd party router into one of the gateway's LAN ports. Make sure that the router is the ONLY DEVICE connected to the gateway (by turning off the gateway's WI-FI and leaving all other LAN ports empty). Thus, the gateway's wireless and wired routing functions are bypassed, having only the single device (the router) to rout to. Then by telling the gateway to assign the public (static) IP's through its DHCP, your router will be the only device assigned a WAN IP which gives the router a direct internet connection and will not conflict with the LAN IP's it, in turn, assigns to all downstream devices. Your 3rd party router is now solely responsible for wireless and wired routing to, from. and among all other devices; after using its own DHCP to assign a LAN IP to each of them (as all other devices are connected to it, the router, NOT the gateway). The router will have it's own firewall and security features so the gateway's firewall should be turned off to avoid conflicts.
I hope this helps and didn't just confuse you more. Good luck.
It probably is not necessary, however it might be a good idea to set the gateway's DHCP Lease Time to infinite, in order to avoid the future possibility that the gateway might reassign the router's WAN IP to one of the other 5 you are leasing from the ISP. This would depend on the brand of gateway and would of course not be necessary if using the second option he mentioned regarding manually assigning the Router's WAN IP.
Will this work with the google Wifi puck?
Can you give some info real quick on how to go about talking to the ISP and getting this all actually done? Because this would be really useful to me
Wtf??😂 I usually follow you for playstation 5 information, but I found you here as well lol very cool 😎
How would this help portforwarding
You don't need portforwarding in this case if you assign the public IP directly to your computer... the only problem is that your computer would be exposed to the whole internet and that's a big deal !
My speed dropped 5mbps and sometime when I use my pc the speed drop to half unless I restart everything
But I fixed my strict nat in game from strict to moderate
Thanks for the vids. you still using this method? I just got onto att fiber and now dealing with having to reset or restart my router every morning to get it working again.
Yup, I have had zero issues with the public IP. You might want to reach out to att
@@JohnGlasscock I think I'm gonna pull the trigger and try to get my static ip like a BOSS!
Will this increase wifi speeds on my router? I have 1000mbps internet with at&t and I'm only getting 225mbps on my nighthawk ax6000
1000mbs with AT&T ...? They lied about that last Zero xD
@@worldwolf9909 it’s there fiber I I am having the same problem
Hey good sir
Are you still using this setup?
Hope you are well man.
Does this work with mesh wifi?
So should I setup this bridge mode before I start setting up my XR500? What steps would you say to do in order to get it done properly?
I explained it in the video, you need to have public IPs from your internet provider to do this method
So this will dramatically increase my 1000mb fiber? I'm getting 200mbps on 5g wifi.
Yo john, i want to bridge my gateway to my router but the gateway is asking for vlan id. So where can i find it?
You should not need to set up a VLAN like that to use bridge mode
@@JohnGlasscock But i can't enable it unless i enter a vlan id
Does anyone had a video or know how to do this with Arris BGW210?
I have the BG210, I leased a block of public IP addresses, I recommend you hook up your router, go to "Home Network" tab, go to "Subnets & DHCP" and change the "Public subnet mode" to on and "allow inbound traffic" to on under public subnet. Next you need to know your assigned ips along with gateway ip/ Router Gateway or RG ip and the subnet mask address. ATT should provide this info if you bought it, or theyll send a tech just to give you that info. You fill in the dhcp 4 start and end ip addresses and change "Primary DHCP pool" to public and save changes. Next you go to "IP Allocation" tab next to " Subnets and DHCP", hook up your router and look for your router's MAC address and click on the "allocate button under "Action" then you scroll and look for the public ips you plugged in the start and end ranges. select one (doesnt matter which) then save changes. and log into your router and restart the router, if you look under the internet setup (if you got a netgear router) you should see the changes made in the ip address. subnet and gateway addresses.
I dont think you need to do this if you have one console only, this setup is more for people trying to get an open nat type for multiple consoles whose ports require them to be forwarded but cant due to not being able to forward the same ports to two different statically assigned private ip addresses. If you only want to use your third party router then just do an ip passthrough, when you run trace commands it should do so successfully for ipv6 if you've enabled it for the bg210.
So I just call my provider and ask for a bridge and a static public IP? Then port forward my router for PLEX?
Hey John Im sure youve been asked this a lot (big surprise right ahahah..) but how do you get past Sonys 100mbps cap? I got 400mbps internet and it only is averaging to 80-90 on a short 14 foot Cat5e Cable. Is it a gaming router I need?
Oh yeah and Ive manually entered everything. MTU is always default, no proxy.
The cap is a myth, I the throughput just gets bottlenecked by the performance of the console and all the hops between your console and the server
@@JohnGlasscock Damn so there is no fix unfortunately. If i could just get 200mbps id be happy
I don't know why it posted it several times I only did it once I promise I'm not spamming!
Hello John. Could you explain how to do this with a BGW210 ATT router and my XR500 Netgear? I already paid for the Static Ip. Thank you man and happy new year.
It will still NAT and Firewall. It simply opens differently. You can wireshark to see what I mean. Honestly just google EAP proxy ubiquiti. That method gives you a true bypass if you have AT&T fiber.
TCC Thanks brother. I’ll take a look to that method ok? I have real issues trying to play FIFA20 here. Was using Comcast before and never had this kind of lag, delay and disconnections.
@@Fabricio11_81 I've been having same issues. Never had a problem with spectrum. When I switched over to att fiber, my firestick has been buffering. Att fiber is Fast as hell but would drop to 10mbps randomly throughout the day. Not sure if using this method would help solve my issue
MikeysWay I’ve been having the same issue with my connection at home, did this work for you? I’ll have consistent 300-400mbps(sometimes more) then it will suddenly drop to below 50mbps for a couple minutes.