hehe , this engine is not for my scooter , im building a new roost 100cc engine which should make 40+ hp , this 200cc engine is from swedishracingteam and will be putt in to a dragraceframe , check out there instagram ( link under the video )
Looks like there is no air going through your variomatic housing, bruh. There is no fan. Be careful... Maybe thats why all the stuff broke (clutch, pulley etc.) Nice work, tho.
yeah they will try that next , it will handle it polini has the best cvt stuff ... i have it in my zip 2 , the 3g clutch has the most grip material off all clutches on the market
I'm surprised that you are not having issues with flooding due to the steep angle that those Lectrons are mounted at. I run one of these carbs on a KTM 300, they are not bad as carbs go.
they are still in the process off setting it up , bore = 52mm stroke = 47mm , when i get new footage ... ill try to add a full setup list , with all the parts off the engine
Its good that your engine didnt brake in half because of the power you need to put all of the screws on the bloock cover when testing its suport but crazy engine
What are your thoughts about polini ceramic speed drive evolution 3 pulleys? Probably the ceramic coating could help the belt from not losing grip under such an amount of hp
We never hade any problems with the belt slipping and causing heat, we just burned the reveno clutch, i figure a heavy duty one with more discs would be a nice evolution. This with my heavy roller in dyno, it is heavier to accelerate then the complete chassi is later when testing on the strip. And we will try Polini Ceramic, LMR is a bad design, there is no splines in the pulley.
@@Patricks_Projects what do you mean with splines? Nice job by the way, 2stroke twin cylinders are crazy, but as an italian i wonder why you decided to use roost cylinders over 2fast 100cc FL( just kidding im just trying to be patriottic lol)
hehe yeah these twin are awesome , if you wonna see these bikes in action , there's a french youtuber ==> th-cam.com/users/TeamRpc83 who just set a new record in the twin class 6.25sec/200meter , check out his last video
I was thinking that, looks like it's got reed valves on the intake so it shouldn't do that. You only get that with no reeds or rotary valves but the carbs aren't on the ends of the crank, feel free to correct me, I know a bit about 2 strokes having owned a few but it doesn't mean I'm right 😀.
I wonder how much total cost to make this twin 2 stroke engine with CVT.. this looks way more interesting than my tuned up 150cc 4 stroke honda scooter :o
Cc, ça existe, il me semble que c est cristofolini qui l'a fait, regarde sur you tube, tu trouvera sûrement... J avait vue ça il y a un petit bout de temps, ça avait l'air très violent !!! 😉 💨 💨 💨
@@christobal1055 oui, j avait vue aussi la mob à 4 cylindres en ligne, mais ce que j avait vue aussi c était un scoot à 4 cylindre en v...ça avait l'air d envoyé sévère ! 😉 ! Et il me semble que c était cristofolini qui avait fait ça, je t invite à chercher la vidéo sur TH-cam, dsl, je ne me souviens plus du titre de la vidéo, si tu aime le multi-cylindres ça devrait te faire déliré ! 😉 💨 💨 💨
they keep it secret for now , the engine only had a couple off runs and they still have allot off tuning to do to make it perfect ... butt it sounds powerfull already
@@zipstunter lol. "sounds" and "is" are 2 very different things. my old CR250 sounded a lot more boss at 10.5k than your 12 or 13k 200cc here. I'm guessing the peak is really narrow the way it climbed. but props for the time I know you have in it. it still aint close to 40hp tho but I'd give it 25-30
Make more videos,about worlds worst moped.I got the V-Clic 2014 evp2 45km\h,only 900$.If you been older,you had knew about widows,families,nerds,car mechanics etc.Better with moped faster than ferrari fxx,wich you should look up for engine sound.
What is a good bore kit for a 2 stroke 2007 rx8 EUROSTRADA you guys can see it on my channel I want to do at least 55 top speed right know is doing 45 top speed what are your recommendations please
scootfast now sells them , and they ship international www.scootfast.net/catalogsearch/result/?q=roost , or you can try directly via the fb page off roost
cus these engines are very powerfull , the record by fab rpc is 6.25sec / 200 meter ... check out a video off some of the twins that race in france ==> th-cam.com/video/XHAUR_ANdb8/w-d-xo.html
Zip stunter Why dont they use dr pulley clutch i mean more torque becouse of weight on the bell and the clutch has a mechanism that in most cases dosent slip😂
over here in europe dr pulley is not really know , and nobody uses it ... its maybe worth a try ... i dunno , but i think a normal polini clutch will be able to handle it , many twins use just the normal style clutches , the new problem they have now is that they spin the outgoing axle in the gears , or break the gears ... its just so much power
zip stunter yeah i know i live in Europe sweden and i know not so many use it polini is the casual way to go becouse it usually hold the power but i think its worth i try the do premium clutches
you have to build it from , many parts ... from different brands , and involves allot of tuning and milling ... cateno miano makes the special center section needed to make it twin
hello , i know he also uploaded videos , butt he asked for permission , this 200cc engine is not mine , i'm posting it for swedishracingteam , the nos video he made off my scooter carlos asked for permission , so no problem , butt thx for reporting it
Those lectron carbs are so sick, what a beautiful engine!
Zip stunter ”im not ready to die ”
•NEXT DAY •
Builds 200 cc twostroke moped🤣🤣
hehe , this engine is not for my scooter , im building a new roost 100cc engine which should make 40+ hp , this 200cc engine is from swedishracingteam and will be putt in to a dragraceframe , check out there instagram ( link under the video )
zip stunter could you in theory put that motor on a normal scooter frame?
you could with some heavy mods , custom subrame , ...
zip stunter thanks for the answer. 🙂
@@zipstunter and relocation of the top shockabsorber mount.
keep them coming bro!
can’t wait too see that beast in a frame 😯
Looks like there is no air going through your variomatic housing, bruh. There is no fan. Be careful... Maybe thats why all the stuff broke (clutch, pulley etc.)
Nice work, tho.
I think exactly the same
True work bugs good call
"COOLBEANZ"
I think these who build this is aware of everything and is knowledgeable of this monster😂 You can see a red Intake for air at the variator.
man. in italia now is the 03.36. please public the video during the day hahahah. Good engine ;)
hehe , sry i woke you up mate , il try to release next time during the day
Sounds like a bee on steroids lol
Can´t wait to see this beast in action :)
If it's a 180° twin parallel engine, you can share one resonance chamber.
Per provarlo ci vorrà un parafango o un filtro aria altrimenti sai quanti sassolini si aspira! Ahah...opera d'arte respect
🎶So i've come to the conclu-BRBRBRBRBRBRBRBR!!!
Isak Johansson irk
They can try polini 3g clutch or doppler its good too, also im pretty sure polini vario and pulley are going to handle it, polini is high quality.
yeah they will try that next , it will handle it polini has the best cvt stuff ... i have it in my zip 2 , the 3g clutch has the most grip material off all clutches on the market
zip stunter more than a Malossi Delta clutch?
yeah almost double , delta clutch has not been updated in a long time , polini 3g is much better and easyer to adjust 2
@@zipstunter kunnen ze daar niet aan een reveno komen?
oh nvm too soon
I'm surprised that you are not having issues with flooding due to the steep angle that those Lectrons are mounted at. I run one of these carbs on a KTM 300, they are not bad as carbs go.
the carbs or a special version ( downdraft version ) 34mm
@@zipstunter LOL, that makes sense, cheers for replying.
Big
We need a video with all the specifications of this engine: Maximum RPM, cylinders internal measures, HP graphic, torque graphic, etc etc...
they are still in the process off setting it up , bore = 52mm stroke = 47mm , when i get new footage ... ill try to add a full setup list , with all the parts off the engine
zip stunter Grazie 🙏
Very compact motor two stroke fuckin perfect
We waited for this😁
Floatting level look awesome.
No problems, Lectron designed them for this angle, quite a smart little mod inside actually, easy and smart.
poor little CVT, you better get something off a snowmobile or even combine :)
Louder than your gf good work mate keep up
I dont know bro, you're girlfriend gets pretty damn loud on Thursday nights.... Friday, she's probably louder bcuz mandingo's in town.....
Its good that your engine didnt brake in half because of the power you need to put all of the screws on the bloock cover when testing its suport but crazy engine
What's the point without numbers
don't mess with this angry chain shaw
What are your thoughts about polini ceramic speed drive evolution 3 pulleys? Probably the ceramic coating could help the belt from not losing grip under such an amount of hp
We never hade any problems with the belt slipping and causing heat, we just burned the reveno clutch, i figure a heavy duty one with more discs would be a nice evolution.
This with my heavy roller in dyno, it is heavier to accelerate then the complete chassi is later when testing on the strip.
And we will try Polini Ceramic, LMR is a bad design, there is no splines in the pulley.
@@Patricks_Projects what do you mean with splines? Nice job by the way, 2stroke twin cylinders are crazy, but as an italian i wonder why you decided to use roost cylinders over 2fast 100cc FL( just kidding im just trying to be patriottic lol)
just make a 1200cc inline6 with those and put it in a Trabant
200cc x 3 = 600cc
2 cylinders x 3 = 6 cylinder
@@rem362
Oh wow sum1 knows and does good maffs home works! :)))) yay!!
@@austinsears1637 i know thanks
Holy God, I gotta suped up 150 and this makes my bike look like a moped. 😨
hehe yeah these twin are awesome , if you wonna see these bikes in action , there's a french youtuber ==> th-cam.com/users/TeamRpc83 who just set a new record in the twin class 6.25sec/200meter , check out his last video
Is it normal to have so much excess fuel blowing out of the ITBs?
What you are seeing is called carb/fuel standoff and is a result of ( in this case ) too much port timing in a 4 stroke it would be the cam timing.
i would say its quite normal in this state of tune (race engine)
@@davidgoodrich4745 thank you for the explanation
I don't play with 2 strokes but hope to do a project one day.
I was thinking that, looks like it's got reed valves on the intake so it shouldn't do that. You only get that with no reeds or rotary valves but the carbs aren't on the ends of the crank, feel free to correct me, I know a bit about 2 strokes having owned a few but it doesn't mean I'm right 😀.
@@dubsydubs5234 i think this has rotaru valves but uses a slide style carb which sprays sometimes
Doesn't look like a very durable and reliable setup tho ;P
I was waiting for the engine to spin up.Where is the stud?
Man that thing wicked.
O YES DADDY.. I WANT MORE.....
More videos!!! Keep up the good work;)
thx , there will be new video's soon , next month my scooter will be ready and then il try to post 1 video per week
I wonder how much total cost to make this twin 2 stroke engine with CVT.. this looks way more interesting than my tuned up 150cc 4 stroke honda scooter :o
Is there the same motor or something similar, only a version for a motorcycle? I just want to put it on my motocross bike.
71,31hp so far... more to come.
Il faudrait faire un 4 cylindre ça serait au top !
Cc, ça existe, il me semble que c est cristofolini qui l'a fait, regarde sur you tube, tu trouvera sûrement... J avait vue ça il y a un petit bout de temps, ça avait l'air très violent !!! 😉 💨 💨 💨
@@Vini-rm2ss dac j'ai vu la mobillette 4 cylindres mais c'est 4 de 50cc tandis que 4 de 100 ça doit ouvrir graaaaaaaave😉😃
@@christobal1055 oui, j avait vue aussi la mob à 4 cylindres en ligne, mais ce que j avait vue aussi c était un scoot à 4 cylindre en v...ça avait l'air d envoyé sévère ! 😉 ! Et il me semble que c était cristofolini qui avait fait ça, je t invite à chercher la vidéo sur TH-cam, dsl, je ne me souviens plus du titre de la vidéo, si tu aime le multi-cylindres ça devrait te faire déliré ! 😉 💨 💨 💨
@@Vini-rm2ss dac merci 😉
@@Vini-rm2ss combien fait il de cheveux ce bolide ?😍
Yo bro u got it on the dyno..... Soooooo whats the HP / TORQUE
they have no recorded runs yet , they just did some setup of the carbs and cvt , stay tuned to the channel for more updates
I wanna see the power curve.... How many HP?
they keep it secret for now , the engine only had a couple off runs and they still have allot off tuning to do to make it perfect ... butt it sounds powerfull already
@@zipstunter whats your estimate?
once it done should make upwards of 70hp
@@zipstunter No secrets, there wasn´t any recorded runs. we just tested vario and made fuelcurve work.
@@zipstunter lol. "sounds" and "is" are 2 very different things. my old CR250 sounded a lot more boss at 10.5k than your 12 or 13k 200cc here. I'm guessing the peak is really narrow the way it climbed. but props for the time I know you have in it. it still aint close to 40hp tho but I'd give it 25-30
I hate videos that say this or that on dyno but don't show the figures, it's like watching a 10,000bhp drag car curb crawling, yeah pointless
ikr.. -1 for oh look it can rev,,
totally
Looks nice.bad some bad engineering.Cure the heat alittle.
"BURN RUBBER,
NOT YOUR SOUL"
Would it be possible to make a twin 172cc version?
Very nice
the carburetors are not too inclined?.....good video !
thx , they or special carbs , made for this angle
👍
Ta dura la pasola
Công nghệ cnc làm thay đổi rất nhiều
badass
Good
👍👌🏼
Surly you ain’t putting that on the piaggio zip
no mate , this is not my engine , it will be putt in to a dragraceframe
Make more videos,about worlds worst moped.I got the V-Clic 2014 evp2 45km\h,only 900$.If you been older,you had knew about widows,families,nerds,car mechanics etc.Better with moped faster than ferrari fxx,wich you should look up for engine sound.
Watch the stand-off under power. Needs air-box/plenum.
👍👍👍
But the question is: how much power does it make?
no numbers yet , they are still tuning it , they only made a couple runs on the dyno ...
i wonder what site u use to get parts?
www.scootfast.net/ or www.hkstore.de
WHERE DO U PUT DA BULLITz AT *
Sounds like my weed wacker with nos shot
wow. d'as some weed plants you got there bub
@@raymondo162 what
What is a good bore kit for a 2 stroke 2007 rx8 EUROSTRADA you guys can see it on my channel I want to do at least 55 top speed right know is doing 45 top speed what are your recommendations please
stage6 70cc sport, airsal 70cc sport. no 70cc "racing" classed cylinders because your stock crank bearings will not be able to handle them
polini make some good cast iron street cilinder , that last a long time , check out polini corsa
@@zipstunter polini corsa is good yeah
Thank you to both of you and if I get the kit would I need to reject the carburetor or get a bigger one
yeah you would definitly need to upjet or get a bigger carb ,and you would also need a matching exhaust
Wow
Ta kerrompe talvia
Time for liquid cooled clutches 😂 (jk)
Do you know of anyway to get roost parts in the uk? Thanks
scootfast now sells them , and they ship international www.scootfast.net/catalogsearch/result/?q=roost , or you can try directly via the fb page off roost
why so much tire for just 200cc?
cus these engines are very powerfull , the record by fab rpc is 6.25sec / 200 meter ... check out a video off some of the twins that race in france ==> th-cam.com/video/XHAUR_ANdb8/w-d-xo.html
Throw that on a zoomed
Il y a une prise d’aire ??
Zip stunter Why dont they use dr pulley clutch i mean more torque becouse of weight on the bell and the clutch has a mechanism that in most cases dosent slip😂
over here in europe dr pulley is not really know , and nobody uses it ... its maybe worth a try ... i dunno , but i think a normal polini clutch will be able to handle it , many twins use just the normal style clutches , the new problem they have now is that they spin the outgoing axle in the gears , or break the gears ... its just so much power
zip stunter yeah i know i live in Europe sweden and i know not so many use it polini is the casual way to go becouse it usually hold the power but i think its worth i try the do premium clutches
What clutch is that?
the special clutch is called reveno , butt it cant handle the power ... next time they will try the polini 3g
U and jack cecil should do a colab
yeah i like his video's , i saw he also has a nos kit now ... once my bike is back together ill talk to him about it
The one cylinder is not running well that's why its week and blowing out the carb need better sync & timing
Good set of pods filters too
Street Beast ;)
Hmm...Swap this into my Grom ?
Donde consigo ese motor jaja saludos
Soo how much did it put down??
there wasn´t any recorded runs. they just tested vario and made fuelcurve work.
What diameter are those carbs?
they are 34 mm i think
Wich oil do you use 2t?
on my engines i use , elf htx 976+ ... swedishracingteam is using methanol with special oil for the twin engine in the video
exhaust??
nice
Song????
Simbai & Eyemèr - Thunder [NCS Release] == th-cam.com/video/A3nIwjUehS0/w-d-xo.html
Thanks man!!! Awesome video by the way!!😁
so long for the reveno.malossi is the best.
This scooter how much price
Carburator size?
i think 38 mm butt not sure
Backsound nya apa. Plis jawab
where do i buy this engine?
you have to build it from , many parts ... from different brands , and involves allot of tuning and milling ... cateno miano makes the special center section needed to make it twin
@@zipstunter any link to get the center part? this engine is based on?
its a small shop in italie that makes this part , you can talk to them via facebook facebook.com/cateno.miano
Where do you come from?
i'm from belgium ,
the builders off this engine or from sweden
@@zipstunter Ok Thanks
It is a plaser to help him
Ça doit être une galère à régler
olivier lecarpentier de ouf
how many Cv? and Nm?
there wasn´t any recorded runs. they just tested vario and made fuelcurve work.
@@zipstunter to much power💪🏼. Brake the transmission.
Hp?
there wasn´t any recorded runs. they just tested vario and made fuelcurve work.
Hello Zip Stunter
hello juan , thx for checking out the video
Song?
Simbai & Eyemèr - Thunder [NCS Release] == th-cam.com/video/A3nIwjUehS0/w-d-xo.html
Phê vãi
hp ???
no numbers yet , they are still tuning it , they only made a couple runs on the dyno ...
ахах сука в 50лет надо начать заниматься драгстерами)))
hello zip stunter I want to tell you that you are stealing your scooter project wn TH-cam is called carlos mesia already uploaded two videos of yours
hello , i know he also uploaded videos , butt he asked for permission , this 200cc engine is not mine , i'm posting it for swedishracingteam , the nos video he made off my scooter carlos asked for permission , so no problem , butt thx for reporting it
Oh ok I can upload a video of yours with your permission
motor jadi jadian
What the actual fack?!
literally
Motor apa nih namanya
piaggio malossi rc one
@@zipstunter oke bang makasih. Udah makan belum bang hahaha
Sto godendo
Losse the fat back tyre stick a set of dirt bike tryres
report it for stealing yours content from youtube