Did you guys see his video yesterday? Any interest in working that location? You guys seem to be clever and focused enough to figure out how to safely and efficiently access that 17oz/t ore he found
@@krakhedd I did. Incredible ore grade. I want to get eyes on it to see how to engineer that beast. Let's see what Jason says. If so, you know we'll be filming 🎥 that!
@@mineoperator I'm curious about the lower sections he couldn't safely access too, something drew the old timers deeper! I wonder if that vein shows elsewhere, maybe even find a spot where it swells in size Safety above all though!! The last thing any healthy person wants to see, is somebody getting hurt or killed in a mining incident Good luck!! Very much looking forward to more of you guys' videos!
They have a really nice operation, and like how economically minded the set up for recovery is done. Judging from the dust layer on the sofa and stuff, it doesn't look like they take many breaks. They definitely could use some tweaking on the equipment. 😂 Thanks Jason... 👍🏻
Did some bronze casting in the past using a #10 crucible and when pouring out the molten charge it took complete inversion and a minute or two to allow all the contents to drain out. That was bronze and hope gold pours out more readily otherwise you may be accumulating some metal in the rough interior surface. Just a thought.
Jason, Please help me with a answer. Im confused about the term mineralization. When you have a hydrothermic quarts vane in the host rock and it has minerals in it, is it mineralized? What is the term for it before its oxidized? I mostly hear it called mineralization when it's been heavily oxidized and looks like heavy rust. I was sitting on the beach at Deception pass looking at rocks when that thought went bouncing through my head.🤔
@58:25 "... for a 100 pounds it´s not gigantic but..." looking at that 0.25g minuscule gold bead, I assume that you are always a very optimistic person !
0.25 grams per 100 pounds is 5 grams per ton. Assuming 80% gold in the metal and 80% recovery after mining and processing leaves 3 grams times $65 or so per gram or approximately $200 per ton. Mining and equipment costs will eat all that up. They need to find better grade ore...They're missing something somewhere for all the work that was done in the old days at this site. Probably need 10 grams per ton or more with all the labor shown in this video to have a discovery / mine.
Nice, i called 0.3g. you're extraction was pretty close to theirs, but working with small samples like your 100lbs makes the test much more sensetive to errors. Which means you did a pretty damn good job getting that 0.257 out of 100lbs.
You ought to put these guys onto your mine from yesterday's video.....they'd prolly not only leap at 17oz/t ore, but, they'd also quickly figure out how to do it safely too I'm sure
I love your work but I’m gonna be a little critical. I’ve watched all of your excursion gathering videos, even the ones with Dan, reluctantly, and would really like to watch your new videos without all the replay. Link to your old vids for those who didn’t see them. Thanks Jason 🙏
Thanks Jason, I just got a new 32" 4K monitor, so it's the closest thing to being there with you. I'm sorry I never had a chance to meet you, I'm only 10 minutes away from your Bellingham operation, but after seeing how hard you work at all your endeavors, you don't need any PIA 'S bugging you:) Cheers, Rik Spector
Jason baby! How often do you dredge out that catch basin from which you recycle all the water? How do you dispose of that waste? It's gotta mostly be sand, yes?
When I first started watching your videos, you would dry the cons before smelting, Why don't you do that anymore before you add your amendments for smelting, instead of guessing how much water is in it?
39:30 I don't understand this point of the process??? where do those roughly over 1/2" crushed rocks go?? there is still all gold in them. .. If they go UP the conveyer?? Where does the power go??
For those curious gold today (06/25/2023) is worth $62/gram at the high price. Given 4 guys extracting we will say a ton a day to get 3-5 grams of gold doesn’t seem profitable considering your running costs alone consume the value of the gold extracted. I love the show but man it’s got to be worth the time unless it’s just a hobby and you are looking for a tax write off.
@@njd4291Yeah, that's what I said... the channel makes good videos and people can watch as they like. Skip ahead if that is what you want. Don't tell creators that they are bad in the comments. He's doing great and who are we to criticize? His videos are a fun watch even if you have to skip forward. Others appreciate it. Don't be selfish.
3 grams per ton?! It’ll cost more than the gold is worth to extract it! How are these guys planning on not going bankrupt?!! Did you warn them Jason? Their life savings are going to get burned up and they’ll all be destitute!!
@@darrenbooker8144 Agreed. I operate a mechanized mine and wouldn't be particularly interested in 0.1opt Au unless it also came with 5-10opt silver. Bear in mind we can drill, blast, and muck 25-50 tons in a day if I've got all the necessary equipment running smoothly. These guys need to figure out how to mechanize their haulage. My recommendation would be a small slusher and revising the station geometry slightly to allow slushing directly into the skip. If they're willing to deal with the added complication and overhead of explosives, going to drill-and-blast with a jackleg and sinker drill could get them into the realm of profitability.
Sorry Jason but I'm very much a realist.. That was an exercise in mental masturbation.. The payback vs. the cost of getting there from here is not economically sound.. They could make better money working at McDonalds...
Dan Hurd is just one of those people that just irritates me, nothing specific, but everything about him just absolutely annoys me, yall def know what im talking about, like ned flanders,…. dan flanders,…. dan turd,…. idk, but yeah hes the type you just wanna give a swirly to
Your holding out....there is know way it was that small... sorry truth is better.. I'm not an expert but I know one thing you don't need to add all that you did on the fist melt...and the more you melt takes away from the purity...but you can't bull chit a bull chiter😂
Interesting as your content is, it's not that interesting that you need to keep feeding the same stuff to us. The first 46 minutes are a copy of a recent video, which most followers have seen, and those whom are interested but have not could go and find. Your channel is the only one I've seen to date that passes off recycled content as new. The recycled content makes up just over 80% of the video. I've no idea why you think it's a good idea, but I can't think I'm the only one thinking of avoiding your content...
Amazing finale Jason!!! The mineoperator team had an incredible time mining and exploring with you and Dan Hurd. More adventures to come!
Did you guys see his video yesterday? Any interest in working that location? You guys seem to be clever and focused enough to figure out how to safely and efficiently access that 17oz/t ore he found
@@krakhedd I did. Incredible ore grade. I want to get eyes on it to see how to engineer that beast. Let's see what Jason says. If so, you know we'll be filming 🎥 that!
@@mineoperator I'm curious about the lower sections he couldn't safely access too, something drew the old timers deeper! I wonder if that vein shows elsewhere, maybe even find a spot where it swells in size
Safety above all though!! The last thing any healthy person wants to see, is somebody getting hurt or killed in a mining incident
Good luck!! Very much looking forward to more of you guys' videos!
You guys have a very nice operation.
@@nunyabisnass1141 thanks! Years of hard work there. We finally can run some ore.
Love how you replay the original video, so we can refresh our memories before you do the smelting and finish the project.
46:17 to skip over the old video and get to the few minutes of new content 😂
what you guys did for those kids is priceless thank you . the heavy hitters have there back. great job
They have a really nice operation, and like how economically minded the set up for recovery is done. Judging from the dust layer on the sofa and stuff, it doesn't look like they take many breaks. They definitely could use some tweaking on the equipment. 😂 Thanks Jason... 👍🏻
Thank you for getting the buckets under the jaw crusher. I feel better now. LOL. Love your work Jason.
Too much water volume on shaker table for fine gold?
Always a good day when Jason drops a video! 🎉
❤ the adventures! Selling the crush to a refiner is an excellent idea.
Great video Jason!
Cool, the editing just keeps getting better and better.
Great video Jason, I could watch this mining and processing all day.
I remember watching the original video, fun stuff. Thumbs up
Did some bronze casting in the past using a #10 crucible and when pouring out the molten charge it took complete inversion and a minute or two to allow all the contents to drain out. That was bronze and hope gold pours out more readily otherwise you may be accumulating some metal in the rough interior surface. Just a thought.
Jason,
Please help me with a answer. Im confused about the term mineralization. When you have a hydrothermic quarts vane in the host rock and it has minerals in it, is it mineralized? What is the term for it before its oxidized? I mostly hear it called mineralization when it's been heavily oxidized and looks like heavy rust. I was sitting on the beach at Deception pass looking at rocks when that thought went bouncing through my head.🤔
That baffle system water recovery is awesome.
Great video Jason 👍
@58:25 "... for a 100 pounds it´s not gigantic but..." looking at that 0.25g minuscule gold bead, I assume that you are always a very optimistic person !
Well, he is in the business of selling gold recovery systems and all
0.25 grams per 100 pounds is 5 grams per ton. Assuming 80% gold in the metal and 80% recovery after mining and processing leaves 3 grams times $65 or so per gram or approximately $200 per ton. Mining and equipment costs will eat all that up. They need to find better grade ore...They're missing something somewhere for all the work that was done in the old days at this site. Probably need 10 grams per ton or more with all the labor shown in this video to have a discovery / mine.
If you put a piece of cardboard under the crucible it should help keep it from sticking to the firebrick
Jason has the wrist strength of a grizzly bear, he just lifts the brick when he pours.
Cardboard inside a 2000 degree furnace? Thanks for your words of wisdom😊
@@woonsockettruthseeker9009 The cardboard turns into a layer of carbon that prevents the sticking.
@@sucheinheityeah, it's just like putting flour on a rolling pin.
Someone's been watching bigstackd
Good effort mate! Thanks for sharing!
Awesome video Jason. I love you're vids, also I'm fascinated with the smelting process. It's interesting stuff.
Love to watch all you guys work
Nice, i called 0.3g. you're extraction was pretty close to theirs, but working with small samples like your 100lbs makes the test much more sensetive to errors. Which means you did a pretty damn good job getting that 0.257 out of 100lbs.
Watching this reminds me of all the early Spanish prospecting which took place in these desert areas. Lots of history.
Hates off to those guys. When i imagine gold miners this is what those people im imagining look like! Proper graft that i hope they hit the jackpot.
ALL THAT FOR 3 GRAMS ? id rather buy paydirt lol.
Thanks for Bringing these videos to us 😊
You ought to put these guys onto your mine from yesterday's video.....they'd prolly not only leap at 17oz/t ore, but, they'd also quickly figure out how to do it safely too I'm sure
I love your work but I’m gonna be a little critical.
I’ve watched all of your excursion gathering videos, even the ones with Dan, reluctantly, and would really like to watch your new videos without all the replay.
Link to your old vids for those who didn’t see them.
Thanks Jason 🙏
Amen.
Thanks Jason,
I just got a new 32" 4K monitor, so it's the closest thing
to being there with you.
I'm sorry I never had a chance to meet you, I'm only 10 minutes away from your Bellingham operation,
but after seeing how hard you work at all your endeavors,
you don't need any PIA 'S bugging you:)
Cheers,
Rik Spector
Another great video. Thanks Jason!
Good stuff guys... the purple line looks good.
I love diggin rocks. Hello from Maine.
That old jaw crusher sounds like it’s working on rice crispies. Those open flywheels are scary
سلام قناتكم جيدة نشكركم ونريد توضيحا اكثر حول الطرق اليدوية السهلة لمعرفة اىخامات هل هي حاملة للمعدن الثمين ام لا
Always enjoy your videos, thank you!
This is oddly satisfying to watch ...I love mining
NOW THAT WAS A GOOD VIDEO,,
I think history channel trained me to watch stuff like this. I love it.
Amazing video! Love it, all the info 👌
Jason your the man. i love watching your videos. i really like your way of story telling and i find you so entertaining. so keep up the good work sir
Excellent Jason I was wondering when you were going to post the results from your visit to that mine six stars
3:55 mine gremlin spotted 😂
What kind of tools you guys use to deal with the bedrock/hard rock ??
How is a couple of grams per day worth all that equipment and a crew of laborers??
Jason baby! How often do you dredge out that catch basin from which you recycle all the water? How do you dispose of that waste? It's gotta mostly be sand, yes?
Now I’m going to have to check out some ore I found😊
Purple quartz is heavy in gold?! There's TONS of purple quarts just all over the ground in spokane.
YOU MUST FIX THE JAW CRUSHERS EYES , FOR GOODNESSES SAKE!
approx how much does a shaker table cost?
I'll send you an email
Thanks for sharing
nice how are you going with the board grind tailings
22:00 Lol anyone else squint when the big dust cloud went by
I look forward to the dust lol
Thank you
Could an operation like that possibly make a profit? This was only the high grade stuff and the final amount of gold seems so insubstantial.
What type of drills are those?
HELICOPTER GOLD!
When I first started watching your videos, you would dry the cons before smelting, Why don't you do that anymore before you add your amendments for smelting, instead of guessing how much water is in it?
36:44 my lungs hurt just watching this.
Add Jet-Dry to the pond where they get to water from in the dirt to fall out of it
39:30 I don't understand this point of the process??? where do those roughly over 1/2" crushed rocks go?? there is still all gold in them. .. If they go UP the conveyer?? Where does the power go??
For those curious gold today (06/25/2023) is worth $62/gram at the high price. Given 4 guys extracting we will say a ton a day to get 3-5 grams of gold doesn’t seem profitable considering your running costs alone consume the value of the gold extracted.
I love the show but man it’s got to be worth the time unless it’s just a hobby and you are looking for a tax write off.
All these guys do it for a hobby. I’m pretty sure the mine operator guys all have day jobs.
@@drewski5730 I would hope they do! I just wanted people to know they aren’t doing this for the money. They are doing it because they love it.
They'd need to buy a slusher, jackleg, and some powder mags to make it profitable.
@@drewski5730Maybe but if your making enough money from mining who needs a day job...
Life is to short, i want to be a Gold miner.
Hi jason how can I contact you to share gold mining operation in Australia?
Add time stamps, most of us have seen the first part.
You can scroll
@@danonly7 thanks tips 👍
@hippie.matt. A lot haven't seen that part. (Like me) Anyone that has used TH-cam know that they can just ff to the next part. Not brain surgery! 👍
@@GoodForYou4504 no shit captain obvious, but the people that watch his videos keep seeing the same video from the prior. We know how to fast forward.
@@njd4291Yeah, that's what I said... the channel makes good videos and people can watch as they like. Skip ahead if that is what you want. Don't tell creators that they are bad in the comments. He's doing great and who are we to criticize? His videos are a fun watch even if you have to skip forward. Others appreciate it. Don't be selfish.
They should bag up that wet sand and sell it as playground sand. Make a profit off the waste.
Geez. Just imagine doing that for a couple of decades without breathing protection...
❤ mineing good stuff thanks
Skip to 46:16
8.19.23. Chad looks like Chachi from Happy Days! 😂
Great love watching your videos. Keep up the good work. P.S. if you ever need a soon to be retired guy let me know. Alabama Bob S.
44:15 .. Another thing that puzzles me?? .. If there's the same amount of gold in the fines and midligns?? Why bother taking the time to sort fines??
Круто😎 🤟♨️
Purple Stuff--- Specular Hematite or Specularite
3 grams per ton?! It’ll cost more than the gold is worth to extract it! How are these guys planning on not going bankrupt?!! Did you warn them Jason? Their life savings are going to get burned up and they’ll all be destitute!!
I agree, 3/4 grams per ton is horrendous for an operation like that,
@@darrenbooker8144 Agreed. I operate a mechanized mine and wouldn't be particularly interested in 0.1opt Au unless it also came with 5-10opt silver. Bear in mind we can drill, blast, and muck 25-50 tons in a day if I've got all the necessary equipment running smoothly.
These guys need to figure out how to mechanize their haulage. My recommendation would be a small slusher and revising the station geometry slightly to allow slushing directly into the skip. If they're willing to deal with the added complication and overhead of explosives, going to drill-and-blast with a jackleg and sinker drill could get them into the realm of profitability.
Now u know why gold is soooo expensive 🎉
Why is this DeJa'Vu?
عمل جيد
A cloth rake, a polyurethane mop.
If you put cardboard between your crucible and flaw brick they won't stick together.
I think the material is handled way ways to much not worth it
You didn't put cardboard under your crucible so it doesn't stick
Ha did you see that gremlin infested chute ..I'd be careful after midnight ...
It’s a nice setup but the mom part of me is saying “hard hats, goggles, guards on the spinning wheels, etc. otherwise interesting.
Seems to me as somebody who knows nothing about mining there's an awful lot of fiddle farting around with their setup
👍
Why do you always recycle the same videos in your most current videos? Always having to fast forward though 90 percent of your content
Sure hope this trend of re-playing old videos and calling it "new" ends soon. Not subscribed to see the same videos over and over again...
You can just skip ahead, we’re not on cable TV anymore 🤠
I agree 👍 💯
@@TheGayestPersononTH-cam You can also just post an 8 minute video and refer a link to the first one. 😘
'Promo SM' ☀️
Sorry Jason but I'm very much a realist.. That was an exercise in mental masturbation.. The payback vs. the cost of getting there from here is not economically sound.. They could make better money working at McDonalds...
Dan Hurd is just one of those people that just irritates me, nothing specific, but everything about him just absolutely annoys me, yall def know what im talking about, like ned flanders,…. dan flanders,…. dan turd,…. idk, but yeah hes the type you just wanna give a swirly to
Your holding out....there is know way it was that small... sorry truth is better.. I'm not an expert but I know one thing you don't need to add all that you did on the fist melt...and the more you melt takes away from the purity...but you can't bull chit a bull chiter😂
Interesting as your content is, it's not that interesting that you need to keep feeding the same stuff to us. The first 46 minutes are a copy of a recent video, which most followers have seen, and those whom are interested but have not could go and find. Your channel is the only one I've seen to date that passes off recycled content as new. The recycled content makes up just over 80% of the video. I've no idea why you think it's a good idea, but I can't think I'm the only one thinking of avoiding your content...
Are you a bitter old man? Great video, perhaps you need to check yourself or get out in the field and start hard rock mining.😎👍
First
👍