Thank you. I remember seeing a set of these as a kid, but had no idea as to what they were used for. Watching this solves the mystery. Quality workmanship too, so thanks again !
Because its a very specific tool. Its used to trim Cow and bull hoofs. Cows and Bulls need their hoofs treamed just like Horses. Because if you dont trim them they get longer and deformed like nails. The animal can also develop infections due to high pressure in certain spots and it can end up real bad. They are used along side Battery powered wheel Grinders and very sharp knifes.
Very well done. However, thought the general accepted practice after restoring a tool was showing it is used. In keeping with that shouldn't you go find a cow?
@@MAKAR_3.14 Я таким обрезал копыта, хороший когтерез а потом отдал. Мне он просто не нужен стал. Есть немного другие послабее а этот вечный со сьемными лезвиями
👏👏👏 great job 🥰
thanks :)
amazing work. Congratulations my friend.
Thank you. I remember seeing a set of these as a kid, but had no idea as to what they were used for. Watching this solves the mystery. Quality workmanship too, so thanks again !
I apologize for not having time to test it, my country is facing a wave of refugees from Ukraine, I volunteered to help :)
If only you had a cow! Nice work!
Very good job as always. First time I have ever seen cow hoof pincers.
It was the same for me :))
Nice video mate
Thanks 🤝
Fantastic restoration. Nice color too. You do great work. Thanks for sharing. I enjoy watching your videos.
Please be safe
Thank you, I hope the war does not pass in my country as well :)
@@GarageRestoration I hope that it doesn't either
Just be safe
Nice Job !
Mükemmel bir çalışma oldu.tebrikler dostum.
teşekkür ederim
Great. It’s a perfect restoration. It’s the first time I’ve seen this tool. Congratulation.
thanks :)
Good 8dea replacing the bolts anyway. If it didn't break on the restore, it probably would have in use. Great restoration job
thanks
Excellent!
Thanks 😇
Interesting project. I have never seen one of these before. Cleaned up great. Love the colour choice. Well done.
Because its a very specific tool. Its used to trim Cow and bull hoofs. Cows and Bulls need their hoofs treamed just like Horses. Because if you dont trim them they get longer and deformed like nails. The animal can also develop infections due to high pressure in certain spots and it can end up real bad. They are used along side Battery powered wheel Grinders and very sharp knifes.
I needed a test, but I didn't have time, I volunteer for refugees from the neighboring country Uracina :(
Thanks Bro
Great job, keep your ideas, you are the Best 👍
Thanks mr petre :)
Excellent 👌👌👌
Thanks 🙏
Good Restoration brother 👍🏻👍🏻
thanks :)
I would have restored that just for fun too! Frikkin badass! Wow. 💯 👌
Thanks :))
Great stuff 👍🏻🙏🏻
Thanks you 😇
It looks great and you did a wonderful job restoring it as well!!!!
Enjoyed your video so I gave it a Thumbs Up for support
Thank you, my loyal subscriber :)
Foarte bine Maestre.
Mulțumesc părinte 😇
Excellent restoration as always! You are one of the best restoration channels on TH-cam in my opinion!
I have a lot of work to do until I get there, but thank you for your encouragement :)
It doesn't need a final test! It look too good so for sure it works💯 Great job👌
Ar fii fost ok un test de final , dar destul de greu sa prind o vaca sa ii tai din copita :))
The cutters themselves can be replaced or unscrewed and sharpened comfortably 😎 👍stuff!
These were not , to be broken
well done goro 🖖🏽🖖🏽🤜🤛
Thank mr 🦴
Fabulous. New subscriber
Thanks
JUST PERFECT
Thanks :)
That's cool :)
Thanks 😇
Nice Job :)
Супер мастер❤️
Thanks
Excelente trabalho. 👏👏🇧🇷
obrigado my frend latino
👏👏👏
Nice 👍🏻
thanks bro :)
I love Romania 🇷🇴
faltou escovar a parte interna dos furos da peça.
Excelente muito bom gostei demais !
thanks :)
Nice job, but I'm curious why you did not remove and sharpen the blades
they were very stuck, I didn't have time at that time :)
Awesome resto!!...what made you decide to not remove the blades and sharpen them?
they were very stuck and I didn't have time, my country borders Ukraine, I volunteer for refugees
@@GarageRestoration they turned out better than new!....please stay safe...
That stripper worked amazingly!...best results I've seen in a long time..
Thank 😇
top 👏👏👏
Super tare
Pacat ca nu am gasit o vacuta sa fac test :))
Very well done. However, thought the general accepted practice after restoring a tool was showing it is used. In keeping with that shouldn't you go find a cow?
I'm sorry, I really didn't have time, my country is close to Ukraine, I volunteer for refugees :(
@@GarageRestoration Do your best for them, they need it
Можно было сразу отпескоструить, смывку только переводить.!?
я не понимаю что ты имеешь в виду ?
Вы сперва смывкой растворяете в ванночке, а потом пескоструете. Можно наверное сразу отпесочить
👍
Show how does it work, practically.
similar to the one in the clip, for both cattle and horses th-cam.com/video/GVtdD_XBJas/w-d-xo.html
Muito bom ,fiz um vídeo muito parecido!!
Goood
U could show cutting something practically. Thanks.
Вэдешкой попшикал и как давай болты рвать...сила!
What you have no cow in you're shop for testing it out? bummer 😂😂😂😂👍👍👍👍
The cow is not on the corner, I decided that helping Ukrainian refugees is a priority over the test :)
And the cow??
I didn't have time to test any farms available :(
@@GarageRestoration thanks for the good time! 😁
Test?
No test :(
where is the final test?? 😡
I'm sorry, I really didn't have time to look for a farm, I'm a volunteer for refugees from Urcaina, my country is neighboring :(
@@GarageRestoration I apologize to you brother.. God help you for your good work ❤❤
Thank you for understanding the situation of Ukrainians taking refuge in Romania for fear of war 🙏
Лезвия не заточил, как следует.
Considering where that was used... all that rust may not be, um, rust.
🐄 💩 😳🤣🤣🤣
As much as possible, I didn't think of that :))
Осталось лошадь или корову найти и копыта обрезать
Да
Вот именно, логичным завершением ролика была бы проба на натуре, проверка качества не только покраски, но и работы этого гаджета.
@@MAKAR_3.14 Я таким обрезал копыта, хороший когтерез а потом отдал. Мне он просто не нужен стал. Есть немного другие послабее а этот вечный со сьемными лезвиями
Wäre es nicht cleverer gewesen gleich auf Edelstahlschrauben zu setzen? Die Brünierung reibt sich doch zwangsläufig ab
Die Idee war, es so original wie möglich zu halten, es war einfach, alle Schrauben zu ersetzen