The long way: th-cam.com/video/iSZz0SfuARw/w-d-xo.htmlsi=FkDTROPPk0FS2LS4 First order bonus: s.click.aliexpress.com/e/_EH0TnXO X3Pro Turbo Jet: s.click.aliexpress.com/e/_EyWP0ZO 160000 RPM Turbo Fan: s.click.aliexpress.com/e/_Ew4r88G Become a channel member: th-cam.com/channels/YXUe7VF9KN-ASABNHN0pCw.htmljoin
If you can in your new video, can you talk the power limit curves? I set my upper limit to 30A, but the scooter still pulls 50A per phase wire. Don’t know if the power curve is bugged, or if it is better to use the speed limit curves
@@easybeart i think thats normal. Ac current has a peak current and rhe effective current. Like when you look at the 230V~ that we have in europe. It is in reality 320V peak but effective voltage is 230V.. just ask in the telegram channel. Best chances to get an answer is there.
@@McKuc Danke dir :) dann werde ich wahrscheinlich noch ein weile warten bis hoffentlich bald eine return to stock option von XD angeboten wird, dann erspart man sich den Ausbau. Aktuell stört mich bei XD das der Einschaltton nicht funktioniert und div. andere Software Bugs, hoffe diese verschwinden dann wieder beim Wechseln zu SHU, Danke für deine Mühe.
@@McKuc Das Lichtverhalten und das Problem mit dem Einschaltton ist leider bekannt und wurde auch öfters von Usern angesprochen, allerdings wurde bislang seitens XD nicht drauf eingegangen und habe nicht den Eindruck das dies in naher Zukunft mit einem Update gefixt wird, ist jetzt schon fast ein Jahr her ohne das dies behoben wurde.
Thank you! What settings are you using on the G2? Someone suggested these settings: Throttle • Set a 33A DPC Curve. • 100% acceleration boost. • Overmodulation ON Brake • Set a 55A Curve. • Set Brake boost between 20-60% depending on your weight. Motor start speed Set any value you want here. Field Weakening • Start speed: 20kmh • Initial field current: 0A • Variable field current: 1500mA/km/h • Iq: 65A • Id: 30A Motor settings Wheel size: 9.7 inches for accurate dash speed. Do you think these are safe / good?
My bro was not able to testdrive it because it was raining the whole day. Looks like this weekend it will rain 200l/m² on one day. We will finetune it next week and i will upload a video with the settings. He wants to reach around 40km/h topspeed because that is enough. Currently it is sth like this. Not sure what the topspeed is now.. I always set a speed limit. If you want to drive downhill over 60, set it higher. I set it to 50. ◇profile 2 S mode only 30A speedbased (1000mA steps) (its smoother and he does not want the scooter to jump when starting haha) Maybe we will switch to 28 - 30A DPC. ◇Have to test what Overmodulation does and read about it before i can say anything about it. This is new for me tbh. ◇i set a custom brake curve that jumps quicker. Like on my g30 videos. ◇We have to test if he needs a Brake boost. ◇2km/h start speed Field weakening. Start speed 22km/h (better for battery then 20km/h) Initial currently 0. Have to see if i need to increase it to 2A or so. Variable 1200-1500 Iq 60 Id 30 ◇Wheel size. Have to test with gps if 9.8 inches or maybe 9.9 is more accurate. Of course there are more settings and they depend on your goal of max speed and range and also factors like tire pressure, weight, terrain, max speed are often individual. You can try diffrrent values and see what you prefer. I can not and will not say that the values are safe to use. I am not responsible for any damage or harm that can happen by using this settings. I made a xiaodash max g2 video wigh settings. Maybe this can also help you..th-cam.com/video/gymMPEMn0rw/w-d-xo.htmlsi=WqEUpPhYvhA8ibcg Edit: i always ctivate firmware spoofiing for BMS and BLE.
I have a ninebot g65. The scooter has a g30 controller, it the possible to st-link the controller and flash it as a g30? Or is there a method fo install SHU via bluetooth?
do you know how overmodulation works? I didn't pay attention to the improved parameters but I noticed that the battery consumption is definitely higher. It's probably not worth it
@@pablogdansk according to rollerplausch shfw thread under point 3.1: The principle is similar to field weakening, which ultimately allows a higher maximum speed because the voltage or speed. of the engine is thereby increased. The waves of the three phases of the motor are modulated via the controller so that it runs over the usual 0-100% duty cycle. In short, the waves are distorted so that a higher voltage results in a higher maximum speed. The disadvantages can be compared to field weakening rollerplausch.com/threads/shfw-anleitung-2024-scooterhacking-utility-ninebot-xiaomi-e-scooter-tuning.3753/
Men i bought everything a second controller, st link vs i also linked the cables and connected to my linux ... I startet my st link cube and then *tschoooonng* how tf i can reflash it shu and all others reflashers with g2 support only works in windows????? Pls help me how i can find a software to reflash it oO
@@jekjekkes3295 use a windows machine. Win 10 or 11 can be instslled for free. Google win media creation tool. Not sure if scooterflasher works on linux. github.com/Encryptize/scooterflasher
Yes. This scooter was also updated. You can see the firmwares it was on in the video. Before flashing with shu, i connected it to the segway app and there were some new updates available. I did not check what exactly and i had not installed all the latest ones (12.09.2024) because i was not sure if segway maybe just released them to fix this somehow. As far as i know it is possible with the latest firmware. to be sure ask in the scooterhacking telegram channel and tell them the firmware numbers for DRV, BLE, and BMS (probably not needed)
@@ChoJun69 currently pinned message: All valid requests sent have been processed. Please do not send more requests for now. I will let you know when it will be possible again. Just be patient or open it. Its also not a problem, just takes more time.
Sorry but this is a video about segway max g2 and not xiaomi. Visit scooterhacking telegram and ask there with more informations like the region of the scooter and the DRV and BLE FW Versions. If you ask like here, i would not be surprised if nobody answers you my friend
Gutes Video. Sehr informativ 👍 Klappt diese Methode auch heute noch mit einem fabrikneuem, deutschen Modell. Hast du dazu mal was gehört? ……. Ist Charles wieder aktiv? Wenn ich es richtig verstanden habe, dann wurde es ihm zum Erscheinungsdatum des Videos ganz schnell zu viel wegen der vielen Anfragen. Liebe Grüße aus dem Kölner Norden 👋
@@fatbatman510 ich würd mich nicht auf Charles verlassen. Vl hat Segway schon die Lücke geschlossen. Über ST-Link gehts: th-cam.com/video/iSZz0SfuARw/w-d-xo.htmlsi=FkDTROPPk0FS2LS4
@@dursinaalexandru6348th-cam.com/video/gymMPEMn0rw/w-d-xo.html depends on weight and so on. I was able to reach 45km/h with xiaodash and shfw should be the same. It is raining here all day and i did not drove it so far. Will probably upload a video with my settings and compare xiaodash vs shfw
The long way: th-cam.com/video/iSZz0SfuARw/w-d-xo.htmlsi=FkDTROPPk0FS2LS4
First order bonus: s.click.aliexpress.com/e/_EH0TnXO
X3Pro Turbo Jet: s.click.aliexpress.com/e/_EyWP0ZO
160000 RPM Turbo Fan: s.click.aliexpress.com/e/_Ew4r88G
Become a channel member: th-cam.com/channels/YXUe7VF9KN-ASABNHN0pCw.htmljoin
Would be cool to see a full detailed video about the SHFW settings. There is not much reliable information about that in video format. Good work.
Edit Update: th-cam.com/video/iSZz0SfuARw/w-d-xo.htmlsi=FkDTROPPk0FS2LS4
...
th-cam.com/video/TRh_jxnO4sE/w-d-xo.htmlsi=RrgEgeCWAUqwOgI_
And
th-cam.com/video/rfXen8yiTOo/w-d-xo.htmlsi=64p7Md1dhXD3nrZF
@@McKucBut these are old, app got lots of updates
@@fabiostanila6448 90% is the same and this information is still important to know for shfw users. I will upload a new video soon.
If you can in your new video, can you talk the power limit curves? I set my upper limit to 30A, but the scooter still pulls 50A per phase wire. Don’t know if the power curve is bugged, or if it is better to use the speed limit curves
@@easybeart i think thats normal. Ac current has a peak current and rhe effective current.
Like when you look at the 230V~ that we have in europe. It is in reality 320V peak but effective voltage is 230V.. just ask in the telegram channel. Best chances to get an answer is there.
Moin! Danke für das detaillierte Video, weißt du ob diese Vorgehensweise auch möglich ist, wenn man bereit XD auf seinem G2 installiert hat?
@@tom9506 nein. Man muss den Controller per ST-Link am pc mit reflasher flashen. Davor noch in der xd app die flashsperre entfernen (Debug settings)
@@McKuc Danke dir :) dann werde ich wahrscheinlich noch ein weile warten bis hoffentlich bald eine return to stock option von XD angeboten wird, dann erspart man sich den Ausbau. Aktuell stört mich bei XD das der Einschaltton nicht funktioniert und div. andere Software Bugs, hoffe diese verschwinden dann wieder beim Wechseln zu SHU, Danke für deine Mühe.
@@tom9506 am besten du fragst nochmal im xiaodash telegram channel nach. Sicher ist sicher. ;)
@@McKuc Das Lichtverhalten und das Problem mit dem Einschaltton ist leider bekannt und wurde auch öfters von Usern angesprochen, allerdings wurde bislang seitens XD nicht drauf eingegangen und habe nicht den Eindruck das dies in naher Zukunft mit einem Update gefixt wird, ist jetzt schon fast ein Jahr her ohne das dies behoben wurde.
Thank you! What settings are you using on the G2? Someone suggested these settings:
Throttle
• Set a 33A DPC Curve.
• 100% acceleration boost.
• Overmodulation ON
Brake
• Set a 55A Curve.
• Set Brake boost between 20-60% depending on your weight.
Motor start speed
Set any value you want here.
Field Weakening
• Start speed: 20kmh
• Initial field current: 0A
• Variable field current: 1500mA/km/h
• Iq: 65A
• Id: 30A
Motor settings
Wheel size: 9.7 inches for accurate dash speed.
Do you think these are safe / good?
My bro was not able to testdrive it because it was raining the whole day. Looks like this weekend it will rain 200l/m² on one day. We will finetune it next week and i will upload a video with the settings. He wants to reach around 40km/h topspeed because that is enough. Currently it is sth like this. Not sure what the topspeed is now..
I always set a speed limit. If you want to drive downhill over 60, set it higher. I set it to 50.
◇profile 2
S mode only
30A speedbased (1000mA steps) (its smoother and he does not want the scooter to jump when starting haha)
Maybe we will switch to 28 - 30A DPC.
◇Have to test what Overmodulation does and read about it before i can say anything about it. This is new for me tbh.
◇i set a custom brake curve that jumps quicker. Like on my g30 videos.
◇We have to test if he needs a Brake boost.
◇2km/h start speed
Field weakening.
Start speed 22km/h (better for battery then 20km/h)
Initial currently 0. Have to see if i need to increase it to 2A or so.
Variable 1200-1500
Iq 60
Id 30
◇Wheel size. Have to test with gps if 9.8 inches or maybe 9.9 is more accurate.
Of course there are more settings and they depend on your goal of max speed and range and also factors like tire pressure, weight, terrain, max speed are often individual. You can try diffrrent values and see what you prefer. I can not and will not say that the values are safe to use. I am not responsible for any damage or harm that can happen by using this settings.
I made a xiaodash max g2 video wigh settings. Maybe this can also help you..th-cam.com/video/gymMPEMn0rw/w-d-xo.htmlsi=WqEUpPhYvhA8ibcg
Edit: i always ctivate firmware spoofiing for BMS and BLE.
My settings: th-cam.com/video/iSZz0SfuARw/w-d-xo.htmlsi=FkDTROPPk0FS2LS4
Works on e2 pro?
I have a ninebot g65. The scooter has a g30 controller, it the possible to st-link the controller and flash it as a g30? Or is there a method fo install SHU via bluetooth?
G30 controllers can be flashed with ST-Link: th-cam.com/video/rfXen8yiTOo/w-d-xo.htmlsi=nXKBtCYP3VsjjuHx
do you know how overmodulation works? I didn't pay attention to the improved parameters but I noticed that the battery consumption is definitely higher. It's probably not worth it
@@pablogdansk according to rollerplausch shfw thread under point 3.1:
The principle is similar to field weakening, which ultimately allows a higher maximum speed because the voltage or speed. of the engine is thereby increased.
The waves of the three phases of the motor are modulated via the controller so that it runs over the usual 0-100% duty cycle.
In short, the waves are distorted so that a higher voltage results in a higher maximum speed.
The disadvantages can be compared to field weakening
rollerplausch.com/threads/shfw-anleitung-2024-scooterhacking-utility-ninebot-xiaomi-e-scooter-tuning.3753/
Men i bought everything a second controller, st link vs i also linked the cables and connected to my linux ... I startet my st link cube and then *tschoooonng* how tf i can reflash it shu and all others reflashers with g2 support only works in windows?????
Pls help me how i can find a software to reflash it oO
@@jekjekkes3295 use a windows machine. Win 10 or 11 can be instslled for free. Google win media creation tool.
Not sure if scooterflasher works on linux. github.com/Encryptize/scooterflasher
How do you make the speedometer to 0 again instead of 96
Idle dash data = speed
Hi! Do you know is this still working with 1.7.6 firmware version?
@@hondaman9424 probably yes. Ask in the telegram channel
do you know if it iss posible to st link 1.8.11 to downgrade on g30 max?
@@6vxcci yes
@@McKuc thanks
i tried to st link g30 max and. it sparked when i put gnd in and now it wont turn on is it broke?
@@6vxcci probably yes
Works if a had updated my firmware vía Segway app?
Yes. This scooter was also updated. You can see the firmwares it was on in the video. Before flashing with shu, i connected it to the segway app and there were some new updates available. I did not check what exactly and i had not installed all the latest ones (12.09.2024) because i was not sure if segway maybe just released them to fix this somehow. As far as i know it is possible with the latest firmware. to be sure ask in the scooterhacking telegram channel and tell them the firmware numbers for DRV, BLE, and BMS (probably not needed)
Hi, wird dies auch mal für die F-Serie, wie den F30, möglich sein?
@@Sichel-HB am besten im telegram channel nachfragen.
Für f Serie gibt es shfw aber das ist sehr buggy
@@canmann4485 Danke für die Antwort. Das wissen wir schon. Die Frage war ob man die SHFW wie im Video ohne ST-Link installieren kann.
@@McKuc nein
I found a Bird ES4 do you know how I can hack it só I can ride it ?
Zap zarap 🤣
But why i will do that after myscooter still going 25km/h for speed ??
@@DJSAWOFFICIEL 40km/h
@@McKuc he dont answer me on telegram
@DJSAWOFFICIEL option 2: th-cam.com/video/iSZz0SfuARw/w-d-xo.htmlsi=FkDTROPPk0FS2LS4
Funktioniert die segway ninebot app weiterhin? Z.b code sperre und Alarmanlage?
Nein!
Gute Frage
well, rip. Charles isnt doing this anymore, so good luck dismantling your scooter to get to controller now. damn
@@ChoJun69 currently pinned message: All valid requests sent have been processed. Please do not send more requests for now. I will let you know when it will be possible again.
Just be patient or open it. Its also not a problem, just takes more time.
Is this work with the G2E
@@RealmRain yes my friend. I hope that he will create the custom drvs again soon. Write him your UID
@@McKuc thanks man
Works also woth augment scooter?
Anyone know when this will be available again
I will let you know in the community tab when i find out something.
How to change serial number xiaomi electric scooter 4
Sorry but this is a video about segway max g2 and not xiaomi. Visit scooterhacking telegram and ask there with more informations like the region of the scooter and the DRV and BLE FW Versions. If you ask like here, i would not be surprised if nobody answers you my friend
Gutes Video. Sehr informativ 👍
Klappt diese Methode auch heute noch mit einem fabrikneuem, deutschen Modell. Hast du dazu mal was gehört?
……. Ist Charles wieder aktiv? Wenn ich es richtig verstanden habe, dann wurde es ihm zum Erscheinungsdatum des Videos ganz schnell zu viel wegen der vielen Anfragen. Liebe Grüße aus dem Kölner Norden 👋
@@fatbatman510 ich würd mich nicht auf Charles verlassen. Vl hat Segway schon die Lücke geschlossen. Über ST-Link gehts: th-cam.com/video/iSZz0SfuARw/w-d-xo.htmlsi=FkDTROPPk0FS2LS4
Ich verstehe. Danke dir!
Too bad I was too late and Charles is not accepting requests anymore. Hopefully I won't miss the next opportunity.
He had a lot of requests and right after i uploaded the video he wrote that it was enough for now. Is there a specified new date for the 2nd round?
@@McKuc Unfortunately I don't think there is a specified new date for the 2nd round
Does he also not accept paid requests?
Спасибо, дружище
@@Сво-брат no problem brat
How fast can you go after you do this?
@@dursinaalexandru6348th-cam.com/video/gymMPEMn0rw/w-d-xo.html depends on weight and so on. I was able to reach 45km/h with xiaodash and shfw should be the same. It is raining here all day and i did not drove it so far. Will probably upload a video with my settings and compare xiaodash vs shfw
link telegram ?
It is in the video, just use the search in telegram.