Fusion 360 - CAM Engrave on Dome Surface - Ask LarsLive

CAM Engrave on Dome Surface is a snippet of Sunday's Ask LarsLive. You Can watch the full episode here:
• Ask LarsLive Fusion 36...
(The advice in my videos are my own and are not intended to represent the views of my wife, children or employer)
My email:
[e-mail]
Want to learn more about Fusion 360? Check out this link:
autode.sk/2rXApL2
Free CNC Handbook:
www.larschrist...
LET'S CONNECT:
/ lars_cadcam
/ mrlarschristensen
/ cadcamstuff
MY SITE:
www.larschrist...

[@joetke]

Pretty good pedagogy Lars. Thank you! Instructive as helpful.

[@InfiniteCraftsman]

I would kill for a video on adding text to a multi curved surface. I saw one that used the sheet metal tool to create each curve and projected through eat one. Basically, wrap text evenly on the top half edge of a donut. 🍩 the video I watched was a little over my head, would love your voice on the subject!

[@Fauncebrothers]

I will not be beaten! very funny. Keep up the good work!

[@petepayne4177]

Good info as always!

[@markwebster8489]

Hi, Lars.....Good video. What is the benefit of using trace rather than the 3Dmachine “profile” operation??

[@StephenBoyd21]

Hi Lars. I can’t work out why you needed to do the surface thing? Why couldn’t you simple roll back the timeline and use the body to generate the spiral. Why did you need the surface?

[@cadcamstuff]

You are right! You could! Back in my shop days my preference was to pull surfaces from the model for CAM and machine to those. This way, when the customer call 6 months later, you have the surfaces as a reminder what you did. If you just drag the timeline you might not remember or worse, if you have to replace the model with a new revision with a different built timeline you could be lost.