I keep one shin pressed against the top edge at almost all times on my Begode RS 19 HS. Keeping three points of contact does a lot to stabilize an otherwise wobbly ride. The big puffy pads the wheel came with are just right for this.
I imagine manufacturers could implement something in the firmware that could sense a speed wobble and be able to self correct by making slight corrections upon it happening. This would be a game changer. I don’t see why they can’t look into this and make it happen.
Doesn't seem possible. EUCs can only self balance backwords and forwards. The side to side wobbles can only be controlled by the rider. It's more of a physical issue rather than a software fix
@ Think of it like a cars traction control. Slight quick breaking and acceleration in accordance to the occilation during a wobble to off set it. I think some testing needs to be done in order to see if it’s possible.
Well done rider! Yes, like you did, change your posture(foot positions)... move to find what dampens and what amplifies... and zero in on damping. Usually leaning one side but not always... and change speed... faster/slower.
I'd like to try it this way but usually if I have a wobble event happening it's because I'm btakjng real hard. In that moment I'm on trafficked road and cant exactly carve without immediate concern for getting hit. Simply turning your head on a pivot-point EUC is asking for trouble especially at high speeds
ABC - Always Be Carving, never go in a straight line at speed I tested my V11Y top speed in a straight line and I almost wobbled at 50, really scary experience
Try switching up your stance, place your dominant leg closer to the wheel pretty much up against the wheel. Check your tire pressure!!! Could be too much or too little. Factor out the small things first & u should be good 👍🏼
My experience is the exact opposite. Moving my legs and feet away from the wheel significantly improve stability. If I am wobbling I can pull my knees away from the wheel and feel it stabilize almost instantly.
I don't have alot of experience but after crashing from a wobble and getting hurt I have come to the conclusion emergency braking to stop a wobble a nono lol ethier go faster/carve also carve while braking
@@alexutlang yeah, I've noticed my first 30 minutes riding is kind of like warming up my body for my rides.. I'm also 34 yrs old and start my rides around 3am... but by the time I'm off work around 9am.. I'm ripping down the road home at 45-50mph no issues... but those first few minutes can be sketch as I'm warming my legs back up. Looking forward to more video's for sure!
@@LukeUtigard Good to know. I'm 40 already so it's a must to do some warm ups and stretching before hitting some top speeds. I did hit 56mph before this wobbles. I should have rested (seated). Lesson learned. Just glad nothing bad happened
Standing up straight I find to be a bad idea. Imagine you go over a bump mid wobble with perfectly straight legs at high speed. Sounds like a great way to make the situation worse
Okay so here is the truth! Wobbles are made by us and controlled by us. The wheel is not making those wobbles you are! You are 100% responsible for those. I learned this the hard way too, but you need to work with your stance and foot position. Just by looking at you riding I know you're uncomfortable and your stance look actually scary to me. No doubt you will get wobble not just on this but on any wheel you ride. Try holding the wheel between your legs, squeeze it when you feel it's getting out of control/wobbly. The foot position should be even and straight on both sides at least on high speed, try to keep them in close to the body of the wheel. There is no hate in this comment but just concern for your safety.
@@alexutlang bro I have been riding from last 3 years I don't even know how many kms on my wheels till now probably over 50k but thats why I said I learned it the hard way!! Just for your own safety and the other people riding on the street 🙏🏻🙏🏻 If your ride still get wobbles your doing it wrong 🙏🏻🙏🏻
@@MeediaGuyRolls if you watched the whole video I did not crash or fall. My goal is to show how to control the wobble especially on high speed! 80kph plus. Thanks for your advice but I'm happy with my stance. This is how I ride and hit 90kph every ride. It has nothing to do with my stance
@@MeediaGuyRolls I think you worry too much about wobbles. I've had far worse wobbles on my Sherman going fast over speed bumps. You gotta know how to deal with wobbles and Alexutlang dealt with them perfectly. I bet he wasn't even scared. Once you can control them like that they become irrelevant. I think his stance is okay. Each stance has it's own pros and cons so it's wrong to say that his stance is bad.
It's hot where I live now (Dubai). This is my average temp when riding. The most I reached was 81C and it tilt back. Maybe because of my riding style. I like to ride fast
When I sat the wobbles stop right away. Clarkpads were obstructing my legs at first. If you noticed speeding a little bit stop the wobbles then braking starts again
I watched for the crash 🤦🏽 You’ll figure it out. I can’t say it will work for you , but when I siliconed all the seems on my wheel and used foam to fill in the gaps around the battery pack and between the wheel and the center piece. Essentially I took all vibration out of the wheel and turned the 5 - 7 plastic parts that were screwed together and fused them. I have to use a razor to open up the wheel, but … this thing rides like a completely different wheel.
Funny I did the same. I glued the two plastic over the wheel. This is my first time to wobble on Mpro. I believed it's because of 2 factors. It's too windy and I've been fighting against the wind for 30 mins and we started our ride at 5am without any leg stretching
Watch the speed. If I speed up wobbles stop then you can sit and break gently. if I stop suddenly because of panicking like most newbie rider then you'll fall
Shouldn't be getting wobbles like at all unless under heavy braking. Do free spin IMMEDIATELY! GARENTEED the tire is not spinning true. Reseat that tire bead.
My technique is to just fall off and break all my bones.
I keep one shin pressed against the top edge at almost all times on my Begode RS 19 HS. Keeping three points of contact does a lot to stabilize an otherwise wobbly ride. The big puffy pads the wheel came with are just right for this.
I imagine manufacturers could implement something in the firmware that could sense a speed wobble and be able to self correct by making slight corrections upon it happening. This would be a game changer. I don’t see why they can’t look into this and make it happen.
問題は、Electric-UniCycleを開発している中華メーカーの多くが、ジャニベコフ効果＝tennis racket theoremを理解しておらず、wobbleを積極的に抑える制御に必要なプログラムを組めていないことです。
大陸間弾道弾や人工衛星の制御に使われてきた古い技術が民間にフィードバックされていません。
ジャイロロボットのwobbleを抑制する技術は、現代のロボット制御の技術から見ればさほど高度なものではありません。
しかし軍事機密に属します。遊具扱いされてきたElectric-UniCycleにそのまま搭載して輸出するわけにはいかないようです。
私が設計した四脚乗馬型移動支援ロボットには、wobbleを抑止するプログラムを組み込んであります。しかし、軍事技術なので市販されていません。
Doesn't seem possible. EUCs can only self balance backwords and forwards. The side to side wobbles can only be controlled by the rider. It's more of a physical issue rather than a software fix
@ Think of it like a cars traction control. Slight quick breaking and acceleration in accordance to the occilation during a wobble to off set it. I think some testing needs to be done in order to see if it’s possible.
Well done rider! Yes, like you did, change your posture(foot positions)... move to find what dampens and what amplifies... and zero in on damping. Usually leaning one side but not always... and change speed... faster/slower.
Thanks
nicely done! not letting them get out of control.
If that happens I usually make a series of 3-4 hard carves. That always sorts it out for me
I usually do that as well but I'm just too tired on this ride.
I'd like to try it this way but usually if I have a wobble event happening it's because I'm btakjng real hard. In that moment I'm on trafficked road and cant exactly carve without immediate concern for getting hit. Simply turning your head on a pivot-point EUC is asking for trouble especially at high speeds
ABC - Always Be Carving, never go in a straight line at speed
I tested my V11Y top speed in a straight line and I almost wobbled at 50, really scary experience
Try switching up your stance, place your dominant leg closer to the wheel pretty much up against the wheel. Check your tire pressure!!! Could be too much or too little. Factor out the small things first & u should be good 👍🏼
Thanks. It was early morning ride and after 30 mins of fast ride without stretching my legs were tired. Just glad I was able to control it.
This ain't no Joke it requires lot of courage than skills on a Single wheel.
Offset stance usually gets the wobble out
you shouldn't be standing on the pedals like a frog. it is necessary to firmly press the toes and heels against the wheel body for maximum control.
😂😂😂😂😂 bro I can’t stop laughing ( standing on the pedals like FROG ) 😂😂😂😂😂
Other people say to do the exact opposite in order to avoid the wobbles.
My experience is the exact opposite. Moving my legs and feet away from the wheel significantly improve stability. If I am wobbling I can pull my knees away from the wheel and feel it stabilize almost instantly.
My technique is not brake or accelerate too hard when it wobbles and keep your weight on one side and lower your center of gravity
I ride seated all the time. So that does help. I don’t get them at all while seated
Agree. I ride seated most of the time now.
Do you also get a surfboard and ride waves while sitting on your board?
How did you get out of the last set of wobbles? Braking and carving to the right?
I just speed up a little to stop the wobbles then sit. Now when I wobble I just sit right away no hesitation. When riding above 80kph i sit😅
Insane wobbles! Very weird specially on MP24!
Agree. Glad nothing bad happened
Seated riding is always wobble-free for me. I guess it is because you have 3 points of contact.
I don't have alot of experience but after crashing from a wobble and getting hurt I have come to the conclusion emergency braking to stop a wobble a nono lol ethier go faster/carve also carve while braking
Yeah but it all depends on your skill level. What works for me is to stay come, go fast , relax then sit
How do you get the euc world overlay on your vids ? What camera are you using?
I'm using insta360 camera and screen recorder on my phone then using kinemaster app for overlay
@@alexutlang thank you so much
0:32 колесо как бы говорит: но но но! хозяин, полегче!
Почему бы не использовать аэродинамическую стабилизацию?
Yeah I'd adjust the stance for sure and keep working them leg muscles nice run though. The last set of wobbles at the end had me sketched out for u
Thanks. Just weird because I never wobble with Mpro. I have over 1k kms on it. My legs cramped after this ride.
@@alexutlang yeah, I've noticed my first 30 minutes riding is kind of like warming up my body for my rides.. I'm also 34 yrs old and start my rides around 3am... but by the time I'm off work around 9am.. I'm ripping down the road home at 45-50mph no issues... but those first few minutes can be sketch as I'm warming my legs back up.
Looking forward to more video's for sure!
@@LukeUtigard Good to know. I'm 40 already so it's a must to do some warm ups and stretching before hitting some top speeds. I did hit 56mph before this wobbles. I should have rested (seated). Lesson learned. Just glad nothing bad happened
@@alexutlang amen to that bro 🙏
Mate trust me, the best solution for wobbling is, don't let your legs bent, stretch them out completely and stand straight up! It'll stop immediately
Thanks. I'll keep that in mind. I usually just speed up a little then brake but good to know what works from others
Standing up straight I find to be a bad idea. Imagine you go over a bump mid wobble with perfectly straight legs at high speed. Sounds like a great way to make the situation worse
Okay so here is the truth! Wobbles are made by us and controlled by us. The wheel is not making those wobbles you are! You are 100% responsible for those. I learned this the hard way too, but you need to work with your stance and foot position. Just by looking at you riding I know you're uncomfortable and your stance look actually scary to me. No doubt you will get wobble not just on this but on any wheel you ride. Try holding the wheel between your legs, squeeze it when you feel it's getting out of control/wobbly. The foot position should be even and straight on both sides at least on high speed, try to keep them in close to the body of the wheel. There is no hate in this comment but just concern for your safety.
Agree but we're different. I have 20,000km mileage on my euc and I'm happy with my riding stance
@@alexutlang bro I have been riding from last 3 years I don't even know how many kms on my wheels till now probably over 50k but thats why I said I learned it the hard way!! Just for your own safety and the other people riding on the street 🙏🏻🙏🏻 If your ride still get wobbles your doing it wrong 🙏🏻🙏🏻
@@MeediaGuyRolls if you watched the whole video I did not crash or fall. My goal is to show how to control the wobble especially on high speed! 80kph plus. Thanks for your advice but I'm happy with my stance. This is how I ride and hit 90kph every ride. It has nothing to do with my stance
@@MeediaGuyRolls I think you worry too much about wobbles. I've had far worse wobbles on my Sherman going fast over speed bumps. You gotta know how to deal with wobbles and Alexutlang dealt with them perfectly. I bet he wasn't even scared. Once you can control them like that they become irrelevant. I think his stance is okay. Each stance has it's own pros and cons so it's wrong to say that his stance is bad.
Meanwhile, other people who are extremely competent will give advice that is 100% opposite of yours. 😂
Woobles at straight still okay usually can still recover. I once wobbles at corner😅 there are not much you can counter it 😂
Agree
Hello! Could you please give me a link to this your phone mount?
Just type wrist phone holder in Amazon. It's the cheapest 1
@@alexutlang I see, thanks
Is 63°C not too hot for battery?
It's hot where I live now (Dubai). This is my average temp when riding. The most I reached was 81C and it tilt back. Maybe because of my riding style. I like to ride fast
I just shift my weight to one leg and it works
Great stuff:)
🙏
You knew the limits👍
@@gareth5000 by experience. My 1st big crashed is due to wobbles 😅
Not the second I bet👍
Oh very good^^*
Shit on a stick you hit 91 on that thing? Legend
Yeah. Thanks for watching.
I'm thinking when you sat on it there were few if any wobbles?
When I sat the wobbles stop right away. Clarkpads were obstructing my legs at first. If you noticed speeding a little bit stop the wobbles then braking starts again
Braking can make it worse. Maybe accelerate out of it? Just not if you're already going 90..
Agree. Increasing speed stops the wobbles
Deceleration wobbles are terrifying. Like your escape path has been cut off only way out is to go even faster
@@xvaldez3284 lol true. Best way is to carve out of em
@@xvaldez3284 only way is to emergency break which works 100% of the time and completely and utterly removes all wobble instantly
After 40k km no wobles 😅
I still wobbles until now, but I learned to ignore it
63 degrees Celsius!!!!! OMG!!! 66!! Are you not afraid of a cut?
High temperature will not cause cut out. I've reached 81 degrees C! It will just tilt you back.
@@alexutlang ,Thanks for your answer. From Medellin, Colombia
MP24?
What's EUC is it?
Begode Mpro
I watched for the crash 🤦🏽
You’ll figure it out.
I can’t say it will work for you , but when I siliconed all the seems on my wheel and used foam to fill in the gaps around the battery pack and between the wheel and the center piece. Essentially I took all vibration out of the wheel and turned the 5 - 7 plastic parts that were screwed together and fused them. I have to use a razor to open up the wheel, but … this thing rides like a completely different wheel.
Funny I did the same. I glued the two plastic over the wheel. This is my first time to wobble on Mpro. I believed it's because of 2 factors. It's too windy and I've been fighting against the wind for 30 mins and we started our ride at 5am without any leg stretching
How?
Relax and ignore it
very scary..
Yes
i dont know what kph means why not just use mph
@@shibadoesntcare 7 billion people on earth use kph while only 300 million knows mph
@@alexutlang I have a funny feeling that a majority of those who actually use TH-cam use MPH
@shibadoesntcare maybe you're right, but people can convert if they so desire
Kamikaze 😁
What are electric unicycle riders thinking?
th-cam.com/video/xQOAAem4ZRs/w-d-xo.html
So that didn't tell me anything
Watch the speed. If I speed up wobbles stop then you can sit and break gently. if I stop suddenly because of panicking like most newbie rider then you'll fall
Shouldn't be getting wobbles like at all unless under heavy braking. Do free spin IMMEDIATELY! GARENTEED the tire is not spinning true. Reseat that tire bead.
It's quite hard to seat the tire properly on 2.75-18 so I changed it to 3.00-18. Much better now
Go faster, I’ll smoke ya in a race on my Mten3
I'm sure🤣. I yield!
Жесть
Watching you go through those wobbles, I almost shit in my pants. Then I saw you were all padded up and then I was like, meh...
🤣🤣🤣. It won't be the first if I fall
Жесть