EP 16 Onefinity CNC - Let's Break A CNC Machine | Hobby CNC machine CUTS at 1,250 IPM!

แชร์
ฝัง
  • เผยแพร่เมื่อ 31 ธ.ค. 2024

ความคิดเห็น • 100

  • @FishersShop
    @FishersShop ปีที่แล้ว +7

    Un-freakin-believable! I love my OneFinity but have never dared push it like this. It's awesome to know that it can hold up to that kind of load though. Simply amazing! Best CNC "hobby" CNC out there, hands down

    • @OnefinityCNC
      @OnefinityCNC  ปีที่แล้ว

      Beast mode!

    • @bigdogmn73
      @bigdogmn73 4 หลายเดือนก่อน

      You better get some more walnut from your neighbor and get testing

  • @napsknottyworks7203
    @napsknottyworks7203 ปีที่แล้ว +3

    So awesome!!! Thanks for putting the machine and the PWNCnc Spindle to the test!

  • @r7j7t7
    @r7j7t7 ปีที่แล้ว +2

    That's good clean American and Canadian fun!! Amazing. Put my order in yesterday!

  • @steveggca
    @steveggca ปีที่แล้ว +2

    Hi Morgan, not in the market for a cnc router at the moment ,but if I were, it would definately be a onefinity machine (helps that i'm canadian😀)
    Having a background in metalworking cnc machines , speed is great, and it also must make circles and diagnonal lines as well.
    A common test that is done is a circle,diamond,and square test Its very easy and will tell you exactly how well a machine can do circles(x,y) anglular lines(x,y) and straight lines (parrallism)
    The circle will help detect backlash errors and in their correction. the diamond will identify if the x,y axis are moving together correctly .

    • @OnefinityCNC
      @OnefinityCNC  ปีที่แล้ว

      Sure would! But that wasn't what this video was about. Just showing the top speeds it can hit, and it was fast!

  • @onefinity-trainingtipswithMitz
    @onefinity-trainingtipswithMitz ปีที่แล้ว +5

    Awesome video, Morgan!! Even though you may not ever run it that fast(1000ipm+) there are certainly many cases where 350-400 ipm is desirable for proper chip load.

  • @NEWTechCreative
    @NEWTechCreative ปีที่แล้ว +3

    Great to see the limits of machine. I would love to see a shape cut like a circle to test rigidity of x and y axis at the same speed! I did push my MPCNC to 2362ipm, however I had no spindle and belt driven. Fun to see limits 😊😊 thanks for sharing

  • @britneyjohnson9624
    @britneyjohnson9624 ปีที่แล้ว +3

    Great video. Direct and riiiight to the cut of it.😂. Always with the lil jokes😂😂. Thanks for all Team OF does. It doesn’t go unnoticed ❤

    • @MorganHop
      @MorganHop ปีที่แล้ว

      We appreciate you!

    • @OnefinityCNC
      @OnefinityCNC  ปีที่แล้ว

      Thank you Britney! We love you too!

  • @ClintonCaraway-CNC
    @ClintonCaraway-CNC ปีที่แล้ว +9

    Morgan.... you are hilarious. You make not only interesting videos but very entertaining.

  • @douglassmith2055
    @douglassmith2055 ปีที่แล้ว +2

    @ 3min "because it's an industrial grade controller.." it is very nice and appears to be a huge upgrade from 1F "previous industrial grade controller" Excited to see the upgrade path for my "industrial grade " Journeyman.

  • @MitchellsWoodwork
    @MitchellsWoodwork ปีที่แล้ว +2

    Incredible. Can’t wait to get mine in a few months!

  • @gaiustacitus4242
    @gaiustacitus4242 ปีที่แล้ว +1

    When using a 1/4" 2-flute end mill at 24,000 RPM, the maximum recommended feed rate for milling at a 1 x diameter (1 x D) depth of cut is 384 inches per minute (0.008 inches per tooth). The end mill begins to tear the wood instead of cutting it at more aggressive feed rates.
    It is impressive that the Onefinity can tear through the wood at 1250 IPM. As noted, this is dependent upon use of the 2hp spindle which bogged down only slightly.
    Assuming the end mill is not becoming discolored from heat and the edge is not becoming dull from abrasives in the plywood, then roughing could be performed at 1250 IPM and finishing could be performed at around 288 IPM (0.006 inches per tooth) to 384 IPM (0.008 inches per tooth) or 480 IPM (aggressive, lower quality surface finish) after a tool swap to get a better surface finish.
    Using two end mills - one for roughing and one for finishing - generally produces the best results and yields the longest tool life and best quality surface finish.

  • @craighhg
    @craighhg ปีที่แล้ว +2

    This makes me more excited for mine!!!

  • @henryoppermann134
    @henryoppermann134 10 หลายเดือนก่อน

    It’s amazing the bit held up to the pressure

    • @OnefinityCNC
      @OnefinityCNC  9 หลายเดือนก่อน

      Built like a tank!

  • @bgauweiler
    @bgauweiler ปีที่แล้ว +2

    Can't wait to get my Elite!

  • @SuperValidDesigns
    @SuperValidDesigns ปีที่แล้ว +3

    I'd love to see a similar test done on aluminum!

    • @OnefinityCNC
      @OnefinityCNC  ปีที่แล้ว

      it wouldn't be as fast. Wood is much more forgiving.

    • @SuperValidDesigns
      @SuperValidDesigns ปีที่แล้ว +2

      @@OnefinityCNC Oh for sure, I just spent the last week cutting a bunch of aluminum parts and, while I felt I was able to increase the speed a reasonable amount, I'd love to know what the actual capabilities of this machine is with aluminum! At the very least, I know the Onefinity can go faster than the competition ;)

  • @MyLifecraft
    @MyLifecraft 10 หลายเดือนก่อน

    That was a beautiful test. I’m going to buy one of these when my newly found business makes some sales :D

  • @novamaggart3251
    @novamaggart3251 ปีที่แล้ว +1

    I love your videos...way to push it!

  • @russellfay81
    @russellfay81 ปีที่แล้ว

    INCREDIBLE! At what speed did the quality degrade? Is the X-50 that robust?

    • @OnefinityCNC
      @OnefinityCNC  ปีที่แล้ว +1

      Since they share the same mechanical systems, the x-50 is very close to the same robustness!

  • @teaguewhite26
    @teaguewhite26 ปีที่แล้ว

    Chip rate to speed ratio looked like it went south somewhere around 450 IPM. I'm glad you pointed out that although it reached 1250 IPM, the top speed was short-lived on a straight cut somewhere in the center of full length of machine as well. The actual cut rate on that pass is probably average in the 650 range, but nonetheless, you did it without snapping bit or breaking anything. Impressive is an understatement! There is no doubt about the only thing you're going to break on these machines are the bits & router/spindles because their built to last. To bad Onefinity doesn't build spindles as well 😂

  • @AnthonyRose
    @AnthonyRose ปีที่แล้ว +2

    man I gotta get that PWNCNC spindle

    • @OnefinityCNC
      @OnefinityCNC  ปีที่แล้ว

      A spindle is a great upgrade!

  • @banjerlegs3051
    @banjerlegs3051 ปีที่แล้ว +1

    Any word on a trade up program for it yet, from a journeyman X-50?

    • @OnefinityCNC
      @OnefinityCNC  ปีที่แล้ว +1

      Hopefully by the end of the year.

    • @banjerlegs3051
      @banjerlegs3051 ปีที่แล้ว +1

      @@OnefinityCNC thank you for your response! Appreciate it

  • @GregCormier
    @GregCormier ปีที่แล้ว

    Would be nice to see Shapeoko 4 Pro and 5 run the same thing. I have a SO4Pro so I will try to setup the same test. Which single flute upcut did you use? I have a brand new Amana one I'm willing to sacrifice for the test. Is that 3/4" construction grade ply?

    • @OnefinityCNC
      @OnefinityCNC  ปีที่แล้ว

      Would be great to compare! Any single flute would work fine. Yes, 3/4 ply.

  • @roynielsen1911
    @roynielsen1911 ปีที่แล้ว

    Wait, were you using a single-flute/"O"-flute bit?

  • @basilloizou1942
    @basilloizou1942 4 หลายเดือนก่อน

    Really enjoy your videos…..I am a home hobbies from Australia. Can you recommend a controller and spindle for my MASSO One finity Journeyman and which do you think would be best a water cooled or air cooled spindle is a water cooled over kill (

    • @OnefinityCNC
      @OnefinityCNC  3 หลายเดือนก่อน

      the masso is the controller! It's a beast!

  • @jeffdolter5256
    @jeffdolter5256 ปีที่แล้ว

    Is there a file available for that top wasteboard with the integral t-slots?

    • @MorganHop
      @MorganHop ปีที่แล้ว

      Yes there is! I’m working on wrapping up a revised version with a 4x4 file so check back soon!

    • @OnefinityCNC
      @OnefinityCNC  ปีที่แล้ว

      On our forums!

  • @ThoenWorks
    @ThoenWorks ปีที่แล้ว +3

    Just for fun.., high speed cutting a circle please 😄

    • @MorganHop
      @MorganHop ปีที่แล้ว +2

      I’ll add that to that to-do list 👍🏼

    • @OnefinityCNC
      @OnefinityCNC  ปีที่แล้ว +1

      Let's go!

    • @emostorm7
      @emostorm7 11 หลายเดือนก่อน

      I wanna see it

  • @pinebarrenpalletworks
    @pinebarrenpalletworks ปีที่แล้ว +2

    You, my friend, def have a couple of screws loose 😅 hahaha jk. We all do 🤪 crazy speeds on that machine! It’s amazing it’s available for hobbyists 🤯

  • @a91customs
    @a91customs ปีที่แล้ว +1

    Great video Morgan! It had to be done😂

    • @MorganHop
      @MorganHop ปีที่แล้ว

      Can’t wait to see the remix 😏

    • @OnefinityCNC
      @OnefinityCNC  ปีที่แล้ว

      Vroom!

  • @getfastfish5020
    @getfastfish5020 8 หลายเดือนก่อน

    any plans of making a 4x8 model any time soon?

    • @OnefinityCNC
      @OnefinityCNC  7 หลายเดือนก่อน

      4x4 is the biggest we have!

    • @getfastfish5020
      @getfastfish5020 7 หลายเดือนก่อน

      @@OnefinityCNC >_>

  • @PorkChopSammie
    @PorkChopSammie ปีที่แล้ว

    I’m impressed. Though this made me very uncomfortable. Every time that spindle went zooming down the rails my stomach did a backflip. Workshop PTSD.

  • @michaelcostello906
    @michaelcostello906 ปีที่แล้ว +2

    At what point did the cuts start looking bad?

    • @MorganHop
      @MorganHop ปีที่แล้ว

      The cuts starting at 800ipm started looking pretty bad because I was cutting perpendicular to the grain instead of parallel. But I was using an upcut bit and wasn't too concerned about cut quality

    • @OnefinityCNC
      @OnefinityCNC  ปีที่แล้ว

      800ipm

  • @Hattinchannel
    @Hattinchannel 2 หลายเดือนก่อน

    Aluminium test ?

    • @OnefinityCNC
      @OnefinityCNC  2 หลายเดือนก่อน +1

      check our other videos.

    • @Hattinchannel
      @Hattinchannel 2 หลายเดือนก่อน

      @@OnefinityCNC thanks will do one final question can the software decide a default spindle speed and paths speed based on material and thickness selection automatically to avoid tool breakage or do i have to specify on the drawing software.

  • @michaelrobey7602
    @michaelrobey7602 ปีที่แล้ว

    How fast did it go until the quality of the cut was bad?

  • @D-GatDesignsLLC
    @D-GatDesignsLLC ปีที่แล้ว

    Personally I would like to see you do this same test with a machine that has a router as opposed to a spindle

    • @OnefinityCNC
      @OnefinityCNC  ปีที่แล้ว

      @morganhop , can we make this happen?

  • @JasonC75
    @JasonC75 ปีที่แล้ว +1

    I used my safety squints watching this one

  • @MOZOGuitars
    @MOZOGuitars ปีที่แล้ว +1

    Epic!!!

  • @johnread7404
    @johnread7404 ปีที่แล้ว

    Well that's made the Shapeoko 5 look very conservative....

  • @lukeinthegarage
    @lukeinthegarage ปีที่แล้ว +1

    You look like a science experiment haha

  • @vashonejordan
    @vashonejordan ปีที่แล้ว +1

    Insane

    • @OnefinityCNC
      @OnefinityCNC  ปีที่แล้ว +1

      speed!

    • @vashonejordan
      @vashonejordan ปีที่แล้ว

      @@OnefinityCNC when I grow up. I'm gonna be a Onefinity Elite Kid! 😁

  • @grumpywoodchucker
    @grumpywoodchucker ปีที่แล้ว +1

    SCIENCE!!!

  • @RyanKunzman
    @RyanKunzman 8 หลายเดือนก่อน

    That's crazy, lots of cringe watching this video. I've been watching a lot of onefinity content and can't wait to make the switch in the very near future. What kind of bit is that.

  • @JohnColgan.
    @JohnColgan. 10 หลายเดือนก่อน +1

    USELESS INFORMATION: 1250 Ipm looks and sounds incredibly fast, yet it is only 1.183712mph!! I was expecting it to be much faster.
    But converted to metric 31,750 mm/min
    1.905 kmh!
    Ive seen lasers running fast. But they have lightweight heads not hunking heavy VFD spindles.
    Do 1Finity know the absolute Terminal Velocity of these?
    I guess no-one says it needs steppers calibrated ;-)

  • @MrDiJ1980
    @MrDiJ1980 ปีที่แล้ว +1

    Ordered one a week ago. So your telling me I can cut everything at 1250 Ipm with no problems… perfect. Lol

    • @OnefinityCNC
      @OnefinityCNC  ปีที่แล้ว

      Sure lol at your own risk! 😜

  • @Dixsons
    @Dixsons ปีที่แล้ว +1

    kinda scared to watch this

    • @OnefinityCNC
      @OnefinityCNC  ปีที่แล้ว +2

      What's the worst that can happen?!