When washing my bike I just spray some kerosene or even WD40 on the rear wheel to loosen up the dirt, then I wash it up with an old microfiber cloth. I wash the tire after that using the same shampoo used to wash the bike. It works every time.
This works wonders, not jus on wheels, removes road grim from anywhere u can reach,, i find it leaves a protective barrier if cleaned very well, then wipe it over until paper towels don't get dirty, makes it very easy for the future
too labor intensive, buy any reputable wheel cleaner and spray on before you rinse down the bike. let it sit for 15 minutes while the chemicals do their job. Than wash the bike thoroughly including a mitt for the wheels alone. Rinse off and 90% of your tire wheel be clean. Take a horsehair brush and clean the remaining 10% dirty areas - way less effort and using water/soap eliminates a lot of potential scratching from rock/debris.
THIS WORKED! I kept looking at my wheels and thought the tar and dust and dirt was baked on like a powder coat. I did not know what to do. Saw this video and gave it a try. The hard stuff came right off. I also bought the Megars Tar and Crap Foam remover just in case it did not work. Now I will use the Megars for touch up because the Goo Gone did the hard work with little wax on, wax off.
Actually this is not really a good thing to tell people to do you're not supposed to scratch sand particles into your wheels or paint you should wet the bike spray some glue gun and then maybe use a light toothbrush or something like that
Over time it's beter to buy a microfiber cloth and wash it than using paper towel, which will scratch it due to some stuff inside (don't know the english word, sorry) otherwise the video is good!
OK...... I love these Vids of people who ignore there Mum and Dad........ SUGAR SOAP guy's.....Its as simple as that and it's cheaper and been around for YEARS...
When washing my bike I just spray some kerosene or even WD40 on the rear wheel to loosen up the dirt, then I wash it up with an old microfiber cloth. I wash the tire after that using the same shampoo used to wash the bike. It works every time.
Yep do that won't hurt it 👍
Wd40 takes the paint of though?😮
@@philkearney0577no WD40 is paint safe
I’m glad someone mentioned the Stache. 👌🏻
Turtle Wax bug and tar my man...works like a dream. Made for clear coat...perfectly safe and effective leaves a nice sheen clean as new.
This works wonders, not jus on wheels, removes road grim from anywhere u can reach,, i find it leaves a protective barrier if cleaned very well, then wipe it over until paper towels don't get dirty, makes it very easy for the future
Sick stache bro
too labor intensive, buy any reputable wheel cleaner and spray on before you rinse down the bike. let it sit for 15 minutes while the chemicals do their job. Than wash the bike thoroughly including a mitt for the wheels alone. Rinse off and 90% of your tire wheel be clean. Take a horsehair brush and clean the remaining 10% dirty areas - way less effort and using water/soap eliminates a lot of potential scratching from rock/debris.
Kerosene would be a much safer option for the paint and you can clean your whole bike with it even your chain also without any damage at all .
Goo gone can eat away at the paint. I use it to remove hard stains then I wash it away
Yes I learned then returned to this video to look for this comment lol seriously 😡
Work great thank you ride safe brother 👍
Aww i liked the stealth black look of the dirt! :P
THIS WORKED! I kept looking at my wheels and thought the tar and dust and dirt was baked on like a powder coat. I did not know what to do. Saw this video and gave it a try. The hard stuff came right off. I also bought the Megars Tar and Crap Foam remover just in case it did not work. Now I will use the Megars for touch up because the Goo Gone did the hard work with little wax on, wax off.
Yrider, thank you for the video.
WD-40 works well too! ...If you don't have goo gone.
I have a 2021 XSR 900 and the gold rims really shine until they get dirty...
The Adam LZ of bikes
Actually this is not really a good thing to tell people to do you're not supposed to scratch sand particles into your wheels or paint you should wet the bike spray some glue gun and then maybe use a light toothbrush or something like that
Over time it's beter to buy a microfiber cloth and wash it than using paper towel, which will scratch it due to some stuff inside (don't know the english word, sorry) otherwise the video is good!
U should never spray directly on the rim. Because you don’t want any of that on the tire Tread
Far better to keep them clean in the first place
By not riding the bike?
Why does everyone on TH-cam have to use that crappy music as background noise?
Very annoying
OK...... I love these Vids of people who ignore there Mum and Dad........ SUGAR SOAP guy's.....Its as simple as that and it's cheaper and been around for YEARS...
Mustache! WD-40, then wipe clean with Windex.
Mr sheen and rag... Easy
pss.. Gosh I thought your J. Franco. I was like Franc 0_o!?
Is it very hard for you to wash the whole bike rather use that goo shit?
He said moron 😄
WD-40
So, you use goo. Was it necessary to use 4 minutes of my life just t say that?
Pointless exercise on a black rim