How do you know if this part is the issue? I'm having problems with cold water leaking even when not in use. I can hear water inside the drum until i turn of the valve. Would this part cause that kind of leak?
Could these be the problem if the error code is F08 E03? I’ve cleaned all hoses and drains.. When running diagnostics the washer gets plenty of water.. but running a cycle the water just barely trickles down the door.
this looks pretty easy...so I did my yearly cleaning out of the hoses, as my house is on a well and I get a little sand/sediment. When I put the hoses back on, turned the water on, started the machine, the motor was running but no water was coming out at all. Could I have possibly pushed sediment into the valve instead of getting it clear? don't want to replace the part if that isn't the issue.
2:00 I ended up having to get a utility Knife and cutting a small slit in the hose to get it to pull off even with a screwdriver assisting, heard the plastic nub cracking at first and freaked out! Since You toss the old part, no biggie from cutting it
Washer overfills only on hot water setting. Stops filling properly on warm and cold water Temps. Could it be the hot water valve? Ruled out pressure switch based on proper fill with warm and cold.
Thanks for the step by step and mentioning the tools T20 Torx. Worked perfectly!
Excellent demonstration. Love it.
You're welcome!
If you would like to give us a review, here is our link: g.page/r/CcVUrahZNozMEBM/review
Have a great day!
How do you know if this part is the issue? I'm having problems with cold water leaking even when not in use. I can hear water inside the drum until i turn of the valve. Would this part cause that kind of leak?
does this assembly have inlet filters, if so could they be changed without changing the whole assembly?
This totally worked! Thanks
Could these be the problem if the error code is F08 E03? I’ve cleaned all hoses and drains.. When running diagnostics the washer gets plenty of water.. but running a cycle the water just barely trickles down the door.
this looks pretty easy...so I did my yearly cleaning out of the hoses, as my house is on a well and I get a little sand/sediment. When I put the hoses back on, turned the water on, started the machine, the motor was running but no water was coming out at all. Could I have possibly pushed sediment into the valve instead of getting it clear? don't want to replace the part if that isn't the issue.
2:00 I ended up having to get a utility Knife and cutting a small slit in the hose to get it to pull off even with a screwdriver assisting, heard the plastic nub cracking at first and freaked out! Since You toss the old part, no biggie from cutting it
Washer overfills only on hot water setting. Stops filling properly on warm and cold water Temps. Could it be the hot water valve? Ruled out pressure switch based on proper fill with warm and cold.
@@repairclinic Thanks. Looking at that first.
My Whirlpool( AWO/C 70081) washing machine control board is not working , how can I buy new board l am living in Ethiopia?
What is the part number of this exact inlet valve? thanks
Why is there so many models of whirlpool and I can't even find mine ,could I have a counterfeit ????
Whirlpool sucks so hard that nobody in their right mind would make a dupe.