JS550/750 conversion ski. FIRST RIDE! 7/28/14
ฝัง
- เผยแพร่เมื่อ 7 ก.ย. 2024
- This is the first time on the water after the build.
shot with a gopro HERO3 HD black edition.
MY 1987 JS550/750 CONVERSION SETUP
1. Matrix paint. With custom airbrushed skulls and Kawasaki lettering .
2. Kawasaki 750 ST Engine
3. Jet Craft Engineering Conversion Plate
4. 650 West Coast performance Exhaust Manifold
5. 650 West Coast Performance Pipe
6. Supertrapp Water Box
7. Blowsion Tornado Air Forced Air Filter……... Not installed yet.
8. Single Carb Prim Kit
9. JRE Aluminum Coupler “Long”
10. JRE Drain Block Plate
11. Impros Skat-Track 20* Pitch Impeller
12. JRE Performance Pump Cone
13. PJS Top Loader Intake Grate
14. 550 Pump Bored Out
15. Ocean Pro Ride Plate
16. Heavy Duty Pole Spring
17. Blowsion 0* Handle Bars
18. ODI Lock On Grips
19. Blowsion Anodized Green Finger Throttle
20. Lanyard Kill Switch Upgrade
21. 750 EBOX - ยานยนต์และพาหนะ
How long did this swap take I’m thinking about doing it myself and what other parts would I need
Nice ski! I'm dreaming of the day I'll get to ride one for the first time! I have,two got one working then dad hogged it.......
My brother got 2 550 and a 650 and built a jet. He got a normal hull with the hood and pole off a racing 550 ( different hood ) and put a 650 motor in it with the 550 pump
Jul 28, 2014This is the first time on the water after the build.
shot with a gopro HERO3 HD black edition.
MY 1987 JS550/750 CONVERSION SETUP
1. Matrix paint. With custom airbrushed skulls and Kawasaki lettering .
2. Kawasaki 750 ST Engine
3. Jet Craft Engineering Conversion Plate
4. 650 West Coast performance Exhaust Manifold
5. 650 West Coast Performance Pipe
6. Supertrapp Water Box
7. Blowsion Tornado Air Forced Air Filter……... Not installed yet.
8. Single Carb Prim Kit
9. JRE Aluminum Coupler “Long”
10. JRE Drain Block Plate
11. Impros Skat-Track 20* Pitch Impeller
12. JRE Performance Pump Cone
13. PJS Top Loader Intake Grate
14. 550 Pump Bored Out
15. Ocean Pro Ride Plate
16. Heavy Duty Pole Spring
17. Blowsion 0* Handle Bars
18. ODI Lock On Grips
19. Blowsion Anodized Green Finger Throttle
20. Lanyard Kill Switch Upgrade
21. 750 EBOX
Chris Busutil Hey man sick ski bro I'm currently in the middle of 550 750 build myself. Running into a problem with the pump I'm using a 550 pump. My 550 pump is blowing out. What pitch impeller should I be using?
porpoising on glass flat water
i was running the wrong intake grate at the time!! shes fixed now.
THANKS!
porpoising on glass flat water = the culprit is PJS top loader, it is meant for strictly rough water and that was not rough water at all! Perhaps a stock grate with the center cut out would give you way better performance in/out of tricks as well as holeshot and less porpoising!
Yup shes all fixed and running like a champ! i need to post more videos.
+Chris Busutil - so what did you do? Change out the grate?
Yes stock grate. I had a top loader on it in the video. It was the very first time on the water.
Do you use the top loader anymore? or just for rough water?
+Chris F just sites there. dont use it anymore
are you on any of the pwctoday forms or the X-h20 form ?? if so hit me up Im 88X2RIDER
Get your weight FORWARD!
wrong intake grate at the time! i had a top loader on for very choppy water. shes back to normal now.
Did you upgrade the pump? Any mods to the 750? How is the low end?
I'm not sure why you were porpoising so much on that glass. That water is near-perfect!
You should be able to hold it WOT and have it be perfectly smooth... Maybe try moving your feet forward more?
The paint on your ski looks really good.
Thanks. at the time i was running a top loader intake grate for choppy water. i put the stock grate on and shes no longer hops like that anymore.
Aha, much better on the smooth water I'm sure!
+mbrickner87 way better!!
Nice job
Hey man sick ski bro I'm currently in the middle of 550 750 build myself. Running into a problem with the pump I'm using a 550 pump. Did you go with a 550 pump or do the 750 conversion pump as well? My 550 pump is blowing out. What pitch impeller should I be using?
Collin Robinson whats up man. Yes I'm using the stock 550 pump with a 20*pitch prop. No less thin a 19*pitch prop on a 750 conversion ski. I'm also running a JRE small pump cone. Helps push more water out. Good luck with your build man!
Got a new video with it installed?
thats one hell of a porpoise machine.. might look into truing the bottom of the hull.. it will really help with that
wrong intake grate at the time! shes all fixed no more hopping!!
Hopefully you'll answer but what color is that?
Its Kawasaki green!
Why is it buckin so bad at high speed?
Probably has a top loader grate or some kind of grate meant for rough and choppy water
Man that water is flat
hey is this mitry lake?
yes
sweet man ! I just picked up a 88 550 hull off a buddy and i will be putting my board out 650 motor with 78.mm pistons in it Bad bones head single 44.mm carb and lighted fly wheel .. and need to swap out that 550 pump and put a 140.,mm pump in her ..
Jimmy Pereira this is my other main name that has some of my old x2 build but need an up date video of the ski it has come a long ass ways since 2011 lol
can you post pics of the engine somehow?
i have a walk around video. go to my channel.
i have a walk around video. go to my channel.
That ski is Super Clean looks really good. Have you noticed and stress on the 550 Hull from the bigger mill
+Blinkman24 thank you!! the 550 hull holds up just fine. no problems!
get a gps or radar on that yet?
Not yet. next summer.
the way this pops up and down I would consider this a failed conversion
If you Read the comments you would see that I had the Wrong intake grate on! It was the very First time on the ski. I had a top loader on. ( for very choppy water) after that she was as smooth as butter!