How to solve the mute light of fp10000q fp20000q amplifier flickers?

if the FP series amplifier turns on, but the mute light flickers off and on.
That's the voltage regulator tubes problem. Just only replace them, the amplifier can work normally.
Please notice that:
1. Some tubes look similar, but they are actually different. (For example, 330K on the left and 390K on the right.) Kindly look carefully, they have different strip colors.
2. Some tubes have different directions.
3. Triode models are different.
4. If one of the tubes is not replaced correctly, the amplifier problem still has.
Email:[e-mail]
Whatsapp:
api.whatsapp.c...
Visit Us:
www.sinbosen.com/

[@elkyperez6898]

Amigo Moisés el amplificador q tengo es el 4 canales fp 20000 q tiene los dos choper en la parte d adelante esta en protección mute le desconecte los conectores d señal d 8 cables q van a cada una d las 4 tarjetas d potencia y siguen protegidos en mute los cuatro canales le agradezco gracias

[@analogaudiorules1724]

How about design the amplifiers correctly in the first place or better yet actually respond to your customers on here. Another thing, those aren't "voltage regulator tubes" They are transistors, diodes and resistors, why not from the factory use higher current handling transistors, larger resistors and larger diodes... To avoid these issues...

[@juninhotecnicodesombacklin6533]

FP 20000 como configuro chave limiter como deve aplicar qual deve usar e gain de entrada qual usar ?

[@eugeniopithan2725]

Isso é só uma parte dos defeitos! Muitas vezes estraga 1 ou até 2 dos foto-acopladores,trilhas que estouram e algumas situações onde ocorre danos em componentes da placa SMPS (plaquinha que fica na posição vertical) da fonte!

[@isaiasjeremy7579]

You probably dont care but if you are stoned like me atm you can watch pretty much all of the latest series on Instaflixxer. I've been watching with my gf for the last few weeks :)

[@eduardoelliott9981]

@Isaias Jeremy yup, I have been watching on InstaFlixxer for since december myself :)

[@playmaicaextravaganza9751]

Hey am from Jamaican I have a FP200000 amp. but have a problem its a 4 channel amp the problem is when I am playing CH. A and then when i turn on CH. B CH.B clip out if am playing CH. C and then turn on CH. D CH D clip out but when am playing CH A and CH C they play OK no clipping out....
All the switch at the back of the amp. Is down how can I fix the problem thank you in advance

[@das-rr7xo]

How to slove temp light on after 10 minutes run amplifier fp14000

[@juanhernadez5031]

Y q valor tiene cada pieza

Hola, quizás puedas contactarnos:
Contacto: [phone]
Correo electrónico: [e-mail]

[@doctortono]

I have this FP22000Q failure. My FP22000Q is a little different because it have TO-3 transistor types; is the same procedure in my FP22000Q like the video in order to solve the failure??
Thanks anticipated

[@analogaudiorules1724]

Did they ever get back to you?

[@NachoBarriga]

De cuantos watt son los Zener?

Puede contactarnos a través de nuestro sitio web oficial: www.sinbosen.com/contact-us.htm

[@Dj_Mik3]

Tengo un amplificador fp10000 y se apaga al subir volumen cual es el problema?