At one point you say, press the button on the gyro then power it up and then a little later you say power it up then press the button, which one is it? Or maybe I misunderstood and you didn't say any of that.
I have the same transmitter with the 3gx on a 450 but it won't light up but will if I hook a receiver to it. Is it necessary to have a rece6to do that because in your video I didn't see where you used a receiver?
Hi, i just got a Trex 450 Plus DFC Rc Helicopter BTF off ebay 2nd hand, i have a Spektrum DX6I ( DSMX only ) and a SPM9645 satellite RX, I have watched EVERY how to video and read EVERY post.. but it stll wont bind properly :arggg: I put the bind plug into the thro port on the 3Gx mRS and plug the Throttle plug into the Rudder port as per instructions..( to give it power ) It does what its meant to.. and i get the get is a solid red light on the sat RX.. as it says i should in the instructions But.. thats all i get.. when i plug thing back where they should be take out the bind plug etc.. its STILL a solid red light on the sat RX ?? if i turn my radio off, the sat light goes off, and it i switch my radio back on, the sat light comes on again.. but it should be Green.. its red... and No input to the heli whatsoever... I would REALLLLLLY appreciate some help guys im flummoxed I Know that people have successfully got the DX6I to bind properly with this heli and sat RX ( although some say you need a 7 or 8 ch radio) this cant be true as there's people on youtube etc using this exact setup i have ??? Please help if you can.. im not very clued up on this..and im pulling my hair out.. cheers rob..
It will be good that you can use also the Futaba Fasst System.
At one point you say, press the button on the gyro then power it up and then a little later you say power it up then press the button, which one is it?
Or maybe I misunderstood and you didn't say any of that.
a pleasure jeff
liked
I have the same transmitter with the 3gx on a 450 but it won't light up but will if I hook a receiver to it. Is it necessary to have a rece6to do that because in your video I didn't see where you used a receiver?
Jeff I have the 300x when i spool up my tail wont hold is it a Gain issue more gain or less??
Thanks
To confirm, can you use the values in the T6 manual with flybarless and be good to go?
The MRS is compatible to Futaba Fasst ?
Hi, i just got a Trex 450 Plus DFC Rc Helicopter BTF off ebay 2nd hand,
i have a Spektrum DX6I ( DSMX only ) and a SPM9645 satellite RX,
I have watched EVERY how to video and read EVERY post.. but it stll wont bind properly :arggg:
I put the bind plug into the thro port on the 3Gx mRS and plug the Throttle plug into the Rudder port as per instructions..( to give it power )
It does what its meant to.. and i get the get is a solid red light on the sat RX.. as it says i should in the instructions
But.. thats all i get.. when i plug thing back where they should be take out the bind plug etc.. its STILL a solid red light on the sat RX ??
if i turn my radio off, the sat light goes off, and it i switch my radio back on, the sat light comes on again.. but it should be Green.. its red... and No input to the heli whatsoever...
I would REALLLLLLY appreciate some help guys im flummoxed
I Know that people have successfully got the DX6I to bind properly with this heli and sat RX ( although some say you need a 7 or 8 ch radio) this cant be true as there's people on youtube etc using this exact setup i have ???
Please help if you can.. im not very clued up on this..and im pulling my hair out..
cheers rob..
rob b nevermind got rid of this SHIT and put a mini K-bar in ..
can it be use/bind with futaba fasst system?
What is the h1 swash type spektrum dx6i equivalent ?
Variable pitch
I have futuba 4pl i cant bind it to other reciver.. my other riciver is fhss 4ch. Can i bind it or not
No
can it bind with any s-fuss radio like airtronics
No
What about bind with spektrum dx8?
Trex 150 DFC Setup/ Bind Procedure for Spektrum Radio systems
Jeff Fassbinder yes thanks but i am talking about t-rex 250
I have futuba 4pl i cant bind it to other reciver.. my other riciver is fhss 4ch. Can i bind it or not
6CH