Wow! What a killer tone. I´m currently chasing a petrucci type sound (2000-2004) using the AMT R1 Preamp in the FX loop of a Marshall Valvestate xD Honestly just your Friedman by itself gets you there soo close I think. Do you have the same experience? I´m kind of torn now if I should get a Friedman or stick to the AMT route. Greetings and...stick to that sound, its awesome^^
Thanks! Not really. I really like my tone / sound now. I’d probably use this setup if we’d be as big as Metallica and could afford to travel with lots of gear. And Metallica uses Kemper’s nowadays and not real tube amps anymore. ’Cos you know; why bother if you can get the sound you’re looking for from a rig that fits in your backpack 😊
So none of these are in an "FX loop"? Its all placed in a chain in front of amp, i.e. it plugs straight into an amp. I don't know if i am missing this...
Yes and I actually used this when I played in Shining. I used a clean sound from the amp (usually Marshall JCM2000 TSL or DSL or JCM800 2203) and then my OD / Distorted sound was the BE-OD and boosted with SD-1 or MXR GT-OD 👌.
No amp. As I explain in the video the signal goes from the board to Neunaber Iconoclast speaker emulator and from there to mixer / FOH. Nowadays I have the Iconoclast on my board so my whole rig is just the pedalboard 👌👍
Thanks! This is old video / board but most likely the same what I have nowadays: tuner - whammy - wah - phaser - od - chorus - flanger - preamp (sometimes I have cho & fla after the preamp so could be that also and sometimes just fla ) - boost - gate - dly
I’ve used the MXR from time to time. It has a switch inside that you can toggle between ZW-44 and GT-OD modes and I usually have it on the Zakk Wylde so it’s basically MXR’s version of SD-1 😎👌.
Great board! Love it. I just subscribed to your channel and I'd love it if you did the same and let me know what you think of the demos I've put up! I just finished a couple videos like this one myself.
Wow! What an great explanation in which order pedals work best and how they sound!
Thanks!
Sweet setup man! Thanks for taking us through it. Super practical, love it! 🤘🏻
Thanks!
The Altoids pedal is a must for those dragon breath licks.😜
Exactly 😁🤟.
Cool stuff! Would be interesting to see a comparison video between the Neunaber and Mooer cab sims.
Thanks! It's unfortunately pretty hard since they both are on Cyhra's live rack and not at home :-)
Great tone and demo.
🏴☠
Thanks!
Wow! What a killer tone. I´m currently chasing a petrucci type sound (2000-2004) using the AMT R1 Preamp in the FX loop of a Marshall Valvestate xD Honestly just your Friedman by itself gets you there soo close I think. Do you have the same experience? I´m kind of torn now if I should get a Friedman or stick to the AMT route. Greetings and...stick to that sound, its awesome^^
Thanks! I have no experience of the AMT Preamp but the Friedman is great and I have no plans to remove it from my board :-)
I also pick very hard to get good tone. Do you intonate your guitars a little more flat to compensate for heavy picking going sharp?
Sounds good. Do you miss real tube amps live or does convenience go before all else?
Thanks! Not really. I really like my tone / sound now. I’d probably use this setup if we’d be as big as Metallica and could afford to travel with lots of gear.
And Metallica uses Kemper’s nowadays and not real tube amps anymore. ’Cos you know; why bother if you can get the sound you’re looking for from a rig that fits in your backpack 😊
So none of these are in an "FX loop"? Its all placed in a chain in front of amp, i.e. it plugs straight into an amp. I don't know if i am missing this...
Unfortunately I just found out you left Shining. Will you still do how to play videos of their songs?
We'll see ;-)
Would you use this same setup with an amp instead of the BE-OD? I also have a CE-5 but it taps out if I put in the loop of my amp :(
Yes and I actually used this when I played in Shining. I used a clean sound from the amp (usually Marshall JCM2000 TSL or DSL or JCM800 2203) and then my OD / Distorted sound was the BE-OD and boosted with SD-1 or MXR GT-OD 👌.
@@EugeValovirta230V nice! This setup sounds sick! I'm impressed with the heaviness despite the dialing of gain being so low.
Yeah! And I’ve dialled the trimpot inside the BE-OD lower ’cos it was way too gainy 😊👌
is this direct input of the amp? or on the fxloop?
No amp. As I explain in the video the signal goes from the board to Neunaber Iconoclast speaker emulator and from there to mixer / FOH. Nowadays I have the Iconoclast on my board so my whole rig is just the pedalboard 👌👍
Nice! Thanks for responding
This was awesome! Can I ask the signal order of the pedals if it’s not too much trouble? 🤟
Thanks! This is old video / board but most likely the same what I have nowadays: tuner - whammy - wah - phaser - od - chorus - flanger - preamp (sometimes I have cho & fla after the preamp so could be that also and sometimes just fla ) - boost - gate - dly
@@EugeValovirta230V ah, delay after the boost, of course. Thank you!
Do you run the Friedman BE-OD on 9V or 18V?
9V
Hey Euge! What are you using for power on your board?
Hey! Voodoo Lab Mondo: www.customboards.fi/search?q=mondo
Euge Valovirta awesome!! Me too!
has anything ever failed on you before?
Hi Euge, have you ever used the Radar in a gig? Do you like it?
Hi Andrea, No I haven't. Just the Neunaber which works great and I'm sure the Radar will too :-)
😳 no sd-1
I’ve used the MXR from time to time. It has a switch inside that you can toggle between ZW-44 and GT-OD modes and I usually have it on the Zakk Wylde so it’s basically MXR’s version of SD-1 😎👌.
Great board! Love it. I just subscribed to your channel and I'd love it if you did the same and let me know what you think of the demos I've put up! I just finished a couple videos like this one myself.
Yeah! Me too ;-). Done and will check out your videos next. RAWK.
Euge Valovirta thanks!