I'm very thankful with you.the way you explain very detailed step by step I already replaced the whole motor mounts on my wife's 2008 altima following your instructions. again.....THANK YOU. GOD BLESS YOU.
TechForce360, thank you so much for this tutorial. Took my car in for an oil change and "whalaa" the mechanic notice my Torque Motor Mount needs to be replaced. When I asked for the cost he stated $380 including labor.
Thanks for your awesome Video on changing the Altima Motor Mounts! Saved me time from figuring out the best way to change these mounts. Straight forward!
You can get a quality Beck/Arnley Torque mount from Rock Auto for $44 including shipping. There are lesser quality ones also available for $20 plus shipping. But by the quality one.
Hello I think I may be having this problem I check my mount passenger side n rubber is all broken when I’m driving I’m hearing a clicking noise like something rubbing I already check my from axles cause they were bad leaking. So I’m guessing the noise is coming from bad motor mounts if you don’t mind telling me which motor mounts you bought from amazon an how long did they last you since you put them on. Thanks in advance
Great video man! I have 2011 Altima 2.5 SL with 82,500 miles. Car wobbles/shimmy/shakes on acceleration especially under load like on and incline. Once up to speed clears up. Steering and suspension components feel and looks fine. Steering wheel doesn’t shake. Feels like shaking from engine. Possible this mount or all these months you did would fix my issue? CV axles look good and don’t have bunch of play in them. So I was thinking engine mount of some kind. It’s been happening since about 60,000 miles. I take very good care of my car. I also make how to videos I including CVT fluid change video. Also how many miles was on your Altima when you did these mounts? Thanks!
Would you recommend OEM parts or do you think it is okay to use aftermarket parts? I was told to use OEM parts if I was gonna keep the vehicle but any possible savings would be great. Thanks.
Bruno Rojas doesn’t really matter as long as it’s a quality and new part. Tbh Nissan puts cheap parts in their cars that don’t last the motor mounts are one of the parts and the crank/camshaft sensors are another
I have replaced this mount three times already... it just keeps on going bad. Now is shot again and my Altima 08 2.5 is pulling to the left when I accelerate and then pulls to the right when I stop pressing the gas pedal. I already replaced inner and outer tie rods, CV axles, 2 alignments and it still pulls. I'm currently reading about pulls coming from torque-steer issues and it can only be the arm controls which only have 20K miles or all the mounts.
I'm very thankful with you.the way you explain very detailed step by step
I already replaced the whole motor mounts on my wife's 2008 altima following your instructions.
again.....THANK YOU.
GOD BLESS YOU.
Excellent instructions! Thanks!!
Just saved 267$ by watching this Thank you!
This was such a great, informative video thank you so much!!
Changed this mount today. It was easy to replace. Saved me some $$$
TechForce360, thank you so much for this tutorial. Took my car in for an oil change and "whalaa" the mechanic notice my Torque Motor Mount needs to be replaced. When I asked for the cost he stated $380 including labor.
Thanks for your awesome Video on changing the Altima Motor Mounts! Saved me time from figuring out the best way to change these mounts. Straight forward!
Thank you man you save me a lot of money. Thanks
Just did this job. It was a breeze with this video!
Well done. Ty
This is really helpful. Thanks!
Thank you
Would you recommend changing all of them ? My car only shakes bad wen i put in reverse after being off a long time and i notice that mount is bad
No need for engine support?
Thank you solid video really helped ifollowed clearly 🤙
What are the torque specs for the bolts?
could you make a video on doing this for a 2016 an also how to check the rear lower one?
Did you have to jack the engine up? if so where was the jacking point.
A wood block under oil pan so it doesnt damage doing one tomorrow
And jack up just till theres pressure
A block of wood under oil pan just enough not to much
You can get a quality Beck/Arnley Torque mount from Rock Auto for $44 including shipping. There are lesser quality ones also available for $20 plus shipping. But by the quality one.
Hello I think I may be having this problem I check my mount passenger side n rubber is all broken when I’m driving I’m hearing a clicking noise like something rubbing I already check my from axles cause they were bad leaking. So I’m guessing the noise is coming from bad motor mounts if you don’t mind telling me which motor mounts you bought from amazon an how long did they last you since you put them on. Thanks in advance
Replace all four
My 2013 Altima SV 2.5 has it in the same place!
Did you jack the car up?
Great video man! I have 2011 Altima 2.5 SL with 82,500 miles. Car wobbles/shimmy/shakes on acceleration especially under load like on and incline. Once up to speed clears up. Steering and suspension components feel and looks fine. Steering wheel doesn’t shake. Feels like shaking from engine. Possible this mount or all these months you did would fix my issue? CV axles look good and don’t have bunch of play in them. So I was thinking engine mount of some kind. It’s been happening since about 60,000 miles. I take very good care of my car. I also make how to videos I including CVT fluid change video. Also how many miles was on your Altima when you did these mounts? Thanks!
One thing people should know
Oil leaks destroy motor mounts
If your car drips oil on the motor mounts
Before replacing motor mounts fix those leaks.
What about the fluid you supposed to add to the motor mount
Anyone know how to change this is the later generation 2013-17 Nissan Sentra
Does all the mounts apply to the 2007 3.5 model?
You have 3 wrenches laying on the engine what is the third size wrench ?
My dealer quoted me $450 LOL for my 2011 Maxima. I bought the part for $40 lol
$14 at rockauto... same brand
Whats the torque specs for the bolts
Would you recommend OEM parts or do you think it is okay to use aftermarket parts? I was told to use OEM parts if I was gonna keep the vehicle but any possible savings would be great. Thanks.
Bruno Rojas doesn’t really matter as long as it’s a quality and new part. Tbh Nissan puts cheap parts in their cars that don’t last the motor mounts are one of the parts and the crank/camshaft sensors are another
Hey do you know anything about the when you turn the steering wheel and you hear a clicking sound
That's the tell tell sign your Cv axles are going bad and need to be replaced
What's the torque spec
where was the jack placed under the car during this process?
rich porter no need to put a jack. As there are 2 other mounts that hold the engine weight.
Does the same apply to the 3.5 engine?
Today my dealer quoted 260 for this mount.
a shop near me charged 500 for that repair. they lost their mind and im never going back
Quoted not charged cuz ill be a fool to accept that 🤣
Ok
i need to change professions if people are paying 120-300 bucks for this in labor.
DrPepperJunior try 800
Ill do everyone for 60 bucks just get the parts
How to fix it if thread strip already ?
Hi, did you fix your stripped thread, I have the same problem.
I bought all 4 brand new motor mounts from eBay for $60
Wasted video when no torque specs given.
So no torque spec
Ill do everyones for 60
2:18
I have replaced this mount three times already... it just keeps on going bad. Now is shot again and my Altima 08 2.5 is pulling to the left when I accelerate and then pulls to the right when I stop pressing the gas pedal. I already replaced inner and outer tie rods, CV axles, 2 alignments and it still pulls. I'm currently reading about pulls coming from torque-steer issues and it can only be the arm controls which only have 20K miles or all the mounts.
Luis Zelaya that’s sucks man, maybe using a more quality part?
thank you
Do you know the torque settings for the bolts?
63 ft lbs