@mistacdawg if so many of you all are having the same problem and it's not a install problem. You may need to email the manufacturer it could be the module.
I don't script anything so whatever dumb stuff goes through my head is what comes out. I thought it was a little funny though. I appreciate your comments thanks for watching.
@@Harleypoor what and that's what makes it so good in genuine I got a question with the yellow blinker lights do you have to just attach that to the blinker fuse in the bike and I might do that
Oh okay. I end up not doing that. You would have to find the blinker wires and splice in to them also they go to specific lights so you would have to place them zone specific side to side. It was going to be kind of a pain so I just did the brake light. You have to splice it in also but much simpler no zones. I wanted to but it wouldn't work with where I wanted the lights.
Have you thought about putting a strip on the inside of the fork legs... will light that wheel... and you can control the wiring away from the wheel..... also did you set it up for flow lighting?
I feel the same way, but like I said in the video. I couldn't figure out a good way to attach them without worrying about it coming loose and getting in the wheel. Also, in most states, including mine. You can not have underglow lights visible, just the glow. So I opted away from it. Thanks for watching.
In the rear wiring harness that goes to the tail light and blinkers you wire into them for the brake light and the blinkers. It can be a pain to figure out some times.
Id recommended replacing that switch with something better. I had the same set-up, and due to that switch "sticking" it was killing my battery. Even though the system was off.
I’m not a big fan of that style of motorcycle. I’m old school biker till I die. I either ride customized bikes or Sportster and Road Kings. But I have to say your bike is very nice and I don’t say that much.
Well done, looks great. From Adelaide, Australia.
Thank you and thanks for watching.
Nice install! And lights look really good.
Thanks I appreciate it.
WOW that looks really good 👍🏾
Thank you sir. Looking forward to your video tonight.
How did you tap into the turn signals. I’m having a problem with mine not flashing. I don’t know if I’m doing something wrong
I tapped into the signals and brake on the wiring harness for the rear lights. It's a bit of a pain to sort it out.
Same here, brake lights work but not turn signals
@mistacdawg if so many of you all are having the same problem and it's not a install problem. You may need to email the manufacturer it could be the module.
You almost went there with that Disco reference you did bounce a little bit so I'll take that as you went there LOLOLOL
I don't script anything so whatever dumb stuff goes through my head is what comes out. I thought it was a little funny though. I appreciate your comments thanks for watching.
@@Harleypoor what and that's what makes it so good in genuine I got a question with the yellow blinker lights do you have to just attach that to the blinker fuse in the bike and I might do that
I'm not sure what yellow blinker lights you meant. Can you tell me more
@@Harleypoor the yellow wire to hook up the lights to your blinkers so they work when you hit your blinker
Oh okay. I end up not doing that. You would have to find the blinker wires and splice in to them also they go to specific lights so you would have to place them zone specific side to side. It was going to be kind of a pain so I just did the brake light. You have to splice it in also but much simpler no zones. I wanted to but it wouldn't work with where I wanted the lights.
Have you thought about putting a strip on the inside of the fork legs... will light that wheel... and you can control the wiring away from the wheel..... also did you set it up for flow lighting?
I did, but I have a lot of lights up there already.
Looks great. It needs a little something up around the front wheel?
I feel the same way, but like I said in the video. I couldn't figure out a good way to attach them without worrying about it coming loose and getting in the wheel. Also, in most states, including mine. You can not have underglow lights visible, just the glow. So I opted away from it. Thanks for watching.
There are two yellow turn signal wires, and one blue brake wire. How do they work in the install?
In the rear wiring harness that goes to the tail light and blinkers you wire into them for the brake light and the blinkers. It can be a pain to figure out some times.
i see you put a couple under your tour pack , how you go about having to take the trunk off ? just disconnect the lights ?
I put them under the mounting plate. The tourpack comes off and lights stay unless the hardware comes off to and they stay on it.
What software did you use for your phone?
The app is led lamp. And the option in the app led ble.
I have a set on my bike but didn’t get the app info before throwing away the packaging… what app run the lights?
It's called Led Lamp in the app store. Thanks for watching.
@@Harleypoorwhat does the app recognize the name of the Bluetooth as? I’m having issues connecting
Sorry I've been very busy .
It's led ble
What app are you using for them?
Led lamp, it's the rgb option in the app.
Or the led ble option in the app.
how have they held up? looking at this kit for my Indian Challenger
They have done very well so far. I'm pretty happy with them. No issues.
Id recommended replacing that switch with something better. I had the same set-up, and due to that switch "sticking" it was killing my battery. Even though the system was off.
It's been a year and haven't had any problems yet. I appreciate the info.
I can't get it to work it says there is a bug in it
I’m not a big fan of that style of motorcycle. I’m old school biker till I die. I either ride customized bikes or Sportster and Road Kings. But I have to say your bike is very nice and I don’t say that much.
Thank you, sir. I appreciate it.