Hi Pink. after I tried several times to set the Date and i found out that you should set the year. if we are in 2024 make sure the year is 2024. just keep hitting the set button till the year pups out
Same clock here as well. Mounting pins seem backwards? They dont fit as packaged and they dont list any instructions or images on how to use them other than the mounting template, but that doesn't help with these pins. Nice clock though.
The digital night wall clock I have isn't syncing the date and day properly; it's showing the previous day's date. I've tried several times to correct it, but it keeps displaying the wrong day. How can I fix this so the date and day align correctly?
I bought one of these to compare it to something I could make myself. Is it any better? Well, the one I bought gains about 20 seconds a week, temperature is about 3 degrees out and the auto brightness stays on minimum unless you shine a torch onto the sensor. So electronics wise, I could make something better but the case I cant. It's cheap but unfortunately its tat. Might gut it and make by own electronics or try and modify it to work properly.
I just received. I turned on the right source of 5v - 1A, the clock turned on beautifully, I set the time, but soon it turns off. and only if I disconnect the power and turn it on again it turns on, after 5 seconds it turns off. What can it be ?? Paulo Brazil
Electronic clocks, I have a few. Manuals are usually tiny, and not comprehensive. I was hoping you would fully explain the setup and settings. UNFORTUNATELY, you hardly mentioned them
It should be under the set but if this isn't working remove the backup batter and disconnect for 30sec and see if this reset it and then try to change it. Last stop reach to the vendor going through Amazon message.
@@Moon_knight20 Yes , but it doesn't work ... Owning it for 1 month and everytime the power goes off ... I have to reset it again .. any suggestions ???
@@Wisdomless_solomonreplace the battery. Or is there really an issue on time memory. Mine doesnt keep the time if it is unplugged for more than 2 days.
Hello! Why don't you film how to adjust the clock? And what other functions does the remote control have? This has a lot of buttons. Does it only have the function of changing the light intensity? You left out the most important aspects. Amateurism...
I love this clock BUT you showed NO functions about it...that was poor.
how do i change the day?, is the only thing left
How do you set the day of the week???
Hi Pink. after I tried several times to set the Date and i found out that you should set the year. if we are in 2024 make sure the year is 2024. just keep hitting the set button till the year pups out
Great clock but ......how the heck you change the mon to sun setting??😮
Can I only use a battery? Or I need to use the USB cable?? Thank you
How do you turn off the alarm!?
Got the same clock. The mounting pins are useless. They won't fit in the slotted mounting hole. I see your video did not show the mounting.
Same clock here as well. Mounting pins seem backwards? They dont fit as packaged and they dont list any instructions or images on how to use them other than the mounting template, but that doesn't help with these pins. Nice clock though.
The digital night wall clock I have isn't syncing the date and day properly; it's showing the previous day's date. I've tried several times to correct it, but it keeps displaying the wrong day. How can I fix this so the date and day align correctly?
I have the same issue
Be sure to set the year to 2024 and the day and date will sync.
I bought one of these to compare it to something I could make myself. Is it any better? Well, the one I bought gains about 20 seconds a week, temperature is about 3 degrees out and the auto brightness stays on minimum unless you shine a torch onto the sensor. So electronics wise, I could make something better but the case I cant.
It's cheap but unfortunately its tat. Might gut it and make by own electronics or try and modify it to work properly.
I just received. I turned on the right source of 5v - 1A, the clock turned on beautifully, I set the time, but soon it turns off. and only if I disconnect the power and turn it on again it turns on, after 5 seconds it turns off. What can it be ?? Paulo Brazil
Can it do a timer counter?
Hi, it having time lagging issue, did you know how to fix it?
can you turn off the two flashing dots
No
I need to know how to program this clock please.
I love this clock, I got to get one..
I actually wish this video had the word actually said a few more times, actually.
Hi i buy this too.. but i can make clock memory . After off and turn in i have to reset it again. Can u show me how to do it?
Hello. please write me if the watch can be turned off with the remote control when going to sleep?
Yes you can turn of the display using the remote cotrol.
Electronic clocks, I have a few.
Manuals are usually tiny, and not comprehensive.
I was hoping you would fully explain the setup and settings.
UNFORTUNATELY, you hardly mentioned them
How can i have it display the am and pm symbols i cant figure it out
Just continue setting the hour display from 1 to 12 and back again until the pm symbols appear.
Can you change the color?
No
I cant set the date to select the year. Its always 2022. Its already 2023. Please advise. Its showing in the guide but its not under the set button
It should be under the set but if this isn't working remove the backup batter and disconnect for 30sec and see if this reset it and then try to change it. Last stop reach to the vendor going through Amazon message.
I bought one on Amazon and got problem the same . And temperature show on not real on time
Push the set botton until you see 2024..them the day will automatically will show the actual day
no mention of a power source?
Yes it has a USB and you can add a battery for keeping fine memory in case it gets disconnected
I put the battery in but the clock won't turn on with it. It only turns on with the usb cable. Any suggestions?
The button battery is for time and setting memory so that you wont need to set the time again after a black out
@@Moon_knight20 Yes , but it doesn't work ... Owning it for 1 month and everytime the power goes off ... I have to reset it again .. any suggestions ???
@@Wisdomless_solomonreplace the battery. Or is there really an issue on time memory. Mine doesnt keep the time if it is unplugged for more than 2 days.
Does it have to stay plugged in ?
You can add a spare battery to keep time in memory if not install you will lose time when unplugging
How to reset ?
All i want to set is the month and day
The Countdown timer has 99 seconds in a Minute - Which am
used me
Kindly make a video for repair of this product
what issues are you having?
@@Upgradetech Battery System not working...How to open clock for repair ? No screw showing on clock
Hello! Why don't you film how to adjust the clock? And what other functions does the remote control have? This has a lot of buttons. Does it only have the function of changing the light intensity? You left out the most important aspects. Amateurism...
Price
It is on the link below
"beautiful remote"?!
You're new to this TH-cam streaming, right?
No but I have 4 channels to manage.
bs advertising lol
All u do is telling people how good the product is but u never give any details how they set up poor video
Bad instructions remove this video
Awful description Teach NOTHING
110 mins