thank you for all the great content.. i just finished pouring the floor on Tuesday for my 55x80x20 steel building. Watching your channel gave me the confidence to put mine up.. Starting the buid Monday . thanks again from Canada
@@BuildingwithNARF Thank you for the kind words . Day two of the build me, and two helper with no experice and we have the cross bace center of the building up with no major issues. I'll try , and post a short video at some point.
Great explanation of what you are doing and how you are doing it!! Good stuff. Just got to the end wall on my new 40x60x16 boat shop and they gave me the wrong parts!! 🤦♂️. Not sure what will happen now. But they are so behind on stuff we will prob end up fixing it ourselves. I can’t wait a month for replacements.
Holler @ us so you don’t have to get the mag drill out ! We design, manufacture, ship anywhere in the country! Very Competitive Pricing! Great video Appreciate it
This is known as a rigid frame steel building. I'm not sure what a bank barn. These type buildings are prefabricated and we bolt them together at the job site. All the welding is done at the shop. We can build you a custom size and design. Let me know what you need and I'll send you a quote. Roofover556@yahoo.com
Just found your channel , really liking it. I’m in construction in N Atlanta and thinking about putting up Barndominium in Mountains. I’ll be watching you!! Thanks 😊
Standing seam is a better roof system. It is a personal preference tho. If I could afford it I would use standing seam panels. PBR will last a long time if it is installed correctly.
Prefab question what is the best way to shim the up right beams ? I was thinking of using leveling nuts and then doing steel beam grout. If I use leveling nuts my prefab panels are cut to exactly 18ft we would be 1 inch short with leveling nuts can I move the wall panel down and use the rake trim to cover the 1 inch short at the top ? Hope that make sense thanks for all your videos and all the time you take to answer questions. Great tips
Yes u can use leveling nuts under columns. Is your concrete that bad off of grade? Your rake trim can hide an inch and up to sometimes 4" of shortness on panels. The eave trim can hide up to 3" most of the time. Not recommended but should work.
Attached To the slab but where each column is there is a substantial amount of concrete. In other words a pier with rebar mats. Also a footer/beam with rebar around the perimeter tying the piers together.
Be sure to use a screwgun with a clutch. Do not use impacts! amzn.to/2Q0P0X9 Thicker gauge steel will not oil can as bad as lighter gauge steel. I have one video about wall panels but it is one of my first and I don't give alot of details. (Excuse the bad video quality).
@@BuildingwithNARF another dumb question..the sticky tape on the insulation,do you stick each peice together as you go or do you go back afterwards and stick them together
@@BuildingwithNARF ok my build was built by r&n in Pittsburgh..don't know if your familiar with them..all galvanized secondary members..they made alot of mistakes in the manufacturing..drove me near insane
By the way, do you do business in Tennessee? I’m shopping for contractors for a new winery building. If not, do you know any reliable services in Tennessee that you can recommend? Thanks in advance!
Hello and greetings. I would like to thank you for recording such videos, which help people like me a lot. I have a request from you. My request is that you help me to build the halls I want. My hall has an opening of 30 meters, but without the middle column at a height of 6 meters. I want to know with what size H beam I can build these halls. I will build it. Of course, if the opening is 30 meters, it will answer. If it doesn't answer, I can make the opening of the shed up to 23 meters. I am waiting for your correct answer. I thank you again for your help. I wish you a good day.
there is always somebody out there showing how to do it wrong and the most unsafe way to do it . osha would love you they are for profit organization and the money they would make of you would be very high
![[MV] A leap of faith...ความเชื่อใจครั้งสุดท้าย (From "Petrichor the series")](http://i.ytimg.com/vi/U1piZH2CNXA/mqdefault.jpg)
Have to love when factory mispunches
Righty tighty, lefty loosey....got it!
thank you for all the great content.. i just finished pouring the floor on Tuesday for my 55x80x20 steel building. Watching your channel gave me the confidence to put mine up.. Starting the buid Monday . thanks again from Canada
Hope all goes well on your build. Thanks for the support!
@@BuildingwithNARF Thank you for the kind words . Day two of the build me, and two helper with no experice and we have the cross bace center of the building up with no major issues. I'll try , and post a short video at some point.
اترك رقم جوالك واتساب للإتصال بك شكرا
Just an update the building is up and all went well thanks for all the great info.
beautiful music choice---and craftsmanship
Great Video Sir! The way I’ve used to line up the ridge is snap a line on the concrete and laxer up to a mark underneath the purin(s)
Thank you for making the videos.
Great explanation of what you are doing and how you are doing it!! Good stuff. Just got to the end wall on my new 40x60x16 boat shop and they gave me the wrong parts!! 🤦♂️. Not sure what will happen now. But they are so behind on stuff we will prob end up fixing it ourselves. I can’t wait a month for replacements.
Good luck!
It's cool!
Holler @ us so you don’t have to get the mag drill out ! We design, manufacture, ship anywhere in the country!
Very Competitive Pricing!
Great video
Appreciate it
THANKS!!
Any more videos of this building being finished?
What are these type of steel frame structures called
Also can you get a prefabricated setup like this to be like a bank barn?
This is known as a rigid frame steel building. I'm not sure what a bank barn. These type buildings are prefabricated and we bolt them together at the job site. All the welding is done at the shop. We can build you a custom size and design. Let me know what you need and I'll send you a quote. Roofover556@yahoo.com
Where is the best place to get your prefab building ? looking to build in illinois. thank you
Amazing info thanks were can I get that level?
Amazon
Thank you
Out of curiosity about how much does a building erection like this cost in terms of labor and equipment?
Just found your channel , really liking it. I’m in construction in N Atlanta and thinking about putting up Barndominium in Mountains. I’ll be watching you!! Thanks 😊
Thanks for coming onboard
What would be the cost of the labor to do this project?
Thanks for the excellent video. Did you make piers for the columns? If not, how were the bolts to anchor the columns placed in the slab?
Concrete was done by others...I do believe there is a pier at each location of the columns. Usually about 1 1/2 yards of concrete per pier.
@@BuildingwithNARF Thanks a lot for the quick reply!
Where are you guys ? Planning to build one
Located in GA.. I would be glad to give you a proposal. Email me at roofover556@ yahoo.com
Hi There....would you believe that a 40 x 60 x 16 would need standing seam roof vs PBR? I'm in FLorida.....Thank You
Standing seam is a better roof system. It is a personal preference tho. If I could afford it I would use standing seam panels. PBR will last a long time if it is installed correctly.
Drill a hole in each fork so you can you shackles with the straps
Prefab question what is the best way to shim the up right beams ? I was thinking of using leveling nuts and then doing steel beam grout. If I use leveling nuts my prefab panels are cut to exactly 18ft we would be 1 inch short with leveling nuts can I move the wall panel down and use the rake trim to cover the 1 inch short at the top ? Hope that make sense thanks for all your videos and all the time you take to answer questions. Great tips
Yes u can use leveling nuts under columns. Is your concrete that bad off of grade? Your rake trim can hide an inch and up to sometimes 4" of shortness on panels. The eave trim can hide up to 3" most of the time. Not recommended but should work.
Who manufactured the building?
is this constructed directly to the slab or is there a stemwall/footing recommended?
Attached To the slab but where each column is there is a substantial amount of concrete. In other words a pier with rebar mats. Also a footer/beam with rebar around the perimeter tying the piers together.
Hello, What are the specs and weight capaciy of the telehandler used in the video?
6000lb and 36' reach
Hey got any videos of installing sheathing over insulation..how to set screws with out oilcanning..
Be sure to use a screwgun with a clutch. Do not use impacts!
amzn.to/2Q0P0X9
Thicker gauge steel will not oil can as bad as lighter gauge steel.
I have one video about wall panels but it is one of my first and I don't give alot of details. (Excuse the bad video quality).
Wall Panel installation with Insulation
th-cam.com/video/bknRxoLLSuw/w-d-xo.html
@@BuildingwithNARF another dumb question..the sticky tape on the insulation,do you stick each peice together as you go or do you go back afterwards and stick them together
@@rossokeefe9268 our insulation just laps each other with no adhesive
@@BuildingwithNARF ok my build was built by r&n in Pittsburgh..don't know if your familiar with them..all galvanized secondary members..they made alot of mistakes in the manufacturing..drove me near insane
Hello newbie here, just wondering is there a block metal building combo that is used?
Yes we have buildings with block walls
Hard hats??
How about you not worry about it! I never where them
By the way, do you do business in Tennessee? I’m shopping for contractors for a new winery building. If not, do you know any reliable services in Tennessee that you can recommend? Thanks in advance!
I can get a building designed, manufactured, and shipped but I couldn't handle the installation.
What are the measurements of the shed?
100*100
how much does it cost to build something like this
@@BuildingwithNARF i am intrested in building something like this
Contact me at roofover556@yahoo.com
Which country sir
USA
Hello and greetings. I would like to thank you for recording such videos, which help people like me a lot. I have a request from you. My request is that you help me to build the halls I want. My hall has an opening of 30 meters, but without the middle column at a height of 6 meters. I want to know with what size H beam I can build these halls. I will build it. Of course, if the opening is 30 meters, it will answer. If it doesn't answer, I can make the opening of the shed up to 23 meters. I am waiting for your correct answer. I thank you again for your help. I wish you a good day.
What do labor numbers look like installing these pre fabs?
Are you asking how much a worker gets paid?
Whats states do you build in
Georgia
Hello there I been watching your videos and I think you the guy can help me in my project 40x60 building let me know thanks
How can I help you?
there is always somebody out there showing how to do it wrong and the most unsafe way to do it . osha would love you they are for profit organization and the money they would make of you would be very high
Sounds drunk. Pass.
you have no clue how to hang iron. UNSAFE!
Why don't you post a video showing everyone how it's done instead of just talking about it
So bored video.
Unless someone is a contractor familiar with these materials and methods, no one knows what you are talking about.
اترك رقم جوالك للإتصال بك