Thanks a lot. You are a true teacher. I fixed my washing machine using the steps you guided. I swapped one of the solenoids with another to fix 'inlet water for tub filling' issue. It works as magic.
marami pong salamat sa gumawa ng video na ito, naayus ko ang aming washing machine... na nawalan ng tubig. THANKS A LOT FOR THIS VIDEO I FIXED MY PROBLEMS, REGARDING ON NO WATER SUPPLY. -FROM QUEZON CITY PHILIPPINES...
Thanks for this. For me, it turned out to be a faulty solenoid. I have a hot water inlet that i never use, so i swapped out the faulty cold water solenoid for the hot water solenoid and it worked a treat!
I wish I would have watched your video before I call the technician from samsung service center 😌. That guy had done nothing except cleaning filter n he removed outer side filter saying that your tank pressure level is low. I can't help u n charged🤨. He has done nothing. You people are serving mankind really😇. If problem continue, I will do as per your instructions. You do good job👍👍. Thank u for this video👍👍
Hello. I have the same problem, my solenoids is ok but when I follow your guide to 3:58, it's not 220v, just 78vac. I don't know how to continue. Please help me.
Hi, I recommend an authorized Samsung tech to check youre unit but first make sure your supply vac from outlet is ok and contacts of solenoid are good. If so probably control board panel is bad
@@rambus56 : Thanks for your replay. The control board had a problem and I had to call a technician to fix it. I live in a countryside so it took a haft-day for him could come. Now the problem is fixed. Once again, thanks for your reply.
Sir i have a question. Meri front load samsung washing machine ha r same 4c error par ha. Machine start bilkul sahee sey leti ha after 10 to 15 minutes, 1 dam drain krdeti ha saara paani r phr dobara se paani lene lagti ha toh error aajata ha
Sir I have the same model washing machine, I was getting same problem of not filling water in machine that's why I have changed the valve.......Naw the machine started filling water but the flow of water is very slow,I have checked the voltage coming across the valve and I am getting the required vtgs on right side vales ....But problem is that not getting any voltage on center valve......Why plz answer.
Sir I have checked the presence of voltage across the valve as u checked the voltage in the video.......The same way I was getting the required vtgs on right side located valve, But not getting any vtgs on center valve.......Even u have not checked the voltage coming across the valve located at the center.why why plzzzzz answer.
Temporary pinagpalit ko yung para sa dual wash nilagay ko sa main inlet and vice versa. Para magamit lang. Pero nakaorder na ako ng buong assembly sa siyapi-pi-pi cost me P700.
Hi, too low resistance would draw more current to flow causes overheating w/c may damage the coil of valve solenoid and if the res is too high not enough current flows w/c causes weak magnetic energy for the valve solenoid to mechanically open the valve.
hello same problem here, as per samsung tech, but the parts cost 3,200. i hope someone can help me where can i buy or order online with good price. TIA
Patulong ngapo.. Ginaya kunamanpo po ung ginawa nyo. Ayaw parin lumabas ung tubig.. Check kupo ung supply sa coil wala po supply.. Ibig pubang sabihin sira po ang controller board.. Pa help nman po..
Hello. I cleaned the solenoid but i keep getting the error 4c. During the error it seem water is also drained at the same time. What could be the issue. Some times ago i also get the error LC
Thanks a lot. You are a true teacher. I fixed my washing machine using the steps you guided. I swapped one of the solenoids with another to fix 'inlet water for tub filling' issue. It works as magic.
marami pong salamat sa gumawa ng video na ito, naayus ko ang aming washing machine... na nawalan ng tubig. THANKS A LOT FOR THIS VIDEO I FIXED MY PROBLEMS, REGARDING ON NO WATER SUPPLY. -FROM QUEZON CITY PHILIPPINES...
Thanks for this. For me, it turned out to be a faulty solenoid. I have a hot water inlet that i never use, so i swapped out the faulty cold water solenoid for the hot water solenoid and it worked a treat!
I wish I would have watched your video before I call the technician from samsung service center 😌. That guy had done nothing except cleaning filter n he removed outer side filter saying that your tank pressure level is low. I can't help u n charged🤨. He has done nothing. You people are serving mankind really😇. If problem continue, I will do as per your instructions. You do good job👍👍. Thank u for this video👍👍
Thanks bro.....I gained alot ....i repaired mine following same steps .....no water is flower.
I seen the village and repaired my wàshing machine. Thanks for posting this video
Thank you so much for this video, I'm from iraq , I fixed my washing machine 🤝
VERY NICE BRO ITS REALLY HELP FULL AND IT WORKS THANK YOU
Thanks sir I solve my problem this video best guide regarding washing machine same model an same problem thanks agen
Sip oke,tutoriale bermanfangat lur
Sir plz aap ise Parekar ki video daaltay rahiye I love that
It worked for me as well. Appreciated and many thanks
Thank you so much. You saved my day.🙏
Thank you very much.
Very useful video
Tumpang ty...kenapa bila air dah separuh lepas tu tekanan air rendah terus air keluar habis kena mula semula
It works! Thanks bro ur the man!
Happy to help
Very very useful Thq
I have same machine but nat working properly after first wash its going be stack u have any solution
Thanks bro can you do a video how to remove the barrel and clean it
Thank you👍👍👍
WA10J5750SP fabric softener not drained problem... do you have video
Very good video
Very good video.
Good day po. Ano po kayang possible na problem. Nonwater po lumalabas. Once lang pi nag error na dc. Pahelp po thank you
Hello. I have the same problem, my solenoids is ok but when I follow your guide to 3:58, it's not 220v, just 78vac. I don't know how to continue. Please help me.
Hi, I recommend an authorized Samsung tech to check youre unit but first make sure your supply vac from outlet is ok and contacts of solenoid are good. If so probably control board panel is bad
@@rambus56 : Thanks for your replay. The control board had a problem and I had to call a technician to fix it. I live in a countryside so it took a haft-day for him could come. Now the problem is fixed. Once again, thanks for your reply.
Sir i have a question. Meri front load samsung washing machine ha r same 4c error par ha.
Machine start bilkul sahee sey leti ha after 10 to 15 minutes, 1 dam drain krdeti ha saara paani r phr dobara se paani lene lagti ha toh error aajata ha
Sir I have the same model washing machine,
I was getting same problem of not filling water in machine that's why I have changed the valve.......Naw the machine started filling water but the flow of water is very slow,I have checked the voltage coming across the valve and I am getting the required vtgs on right side vales ....But problem is that not getting any voltage on center valve......Why plz answer.
Sir I have checked the presence of voltage across the valve as u checked the voltage in the video.......The same way I was getting the required vtgs on right side located valve,
But not getting any vtgs on center valve.......Even u have not checked the voltage coming across the valve located at the center.why why plzzzzz answer.
You should change the valve I think it costs 400 to 500 rs.
Boss nagpalit Na ako ng ganyan pero pag salpak ko diretso nman tubig..
my sharp.es-u75gp-bl no power on solenoid
What if there is no supply voltage on all solenoid terminals? What is the trouble?
Hi may i know what if i dont have any error code 4c.but water is not coming in.
How about suiz On no function..... Please help sir
Sinubukan na namin ganyan sir. Pero di parin po pumapasok ang tubig. Pero sa warer jet sa dual wash. Mayron nman po. Ano pa kaya sira. Boss
Temporary pinagpalit ko yung para sa dual wash nilagay ko sa main inlet and vice versa. Para magamit lang. Pero nakaorder na ako ng buong assembly sa siyapi-pi-pi cost me P700.
@@russelsolis link please?
Ngayon lang po nagka error washing namin kamusta n po ung sa inyo na try nu po ba gawin ung nasayvideo
Thanks🙏
What if the resistance reading is not 4k ohms?
Hi, too low resistance would draw more current to flow causes overheating w/c may damage the coil of valve solenoid and if the res is too high not enough current flows w/c causes weak magnetic energy for the valve solenoid to mechanically open the valve.
Pa help dn po. Wala pong error code pro wala pong tubig na lumalabas. Possible po kaya na sa valve dn ang problem?
Thanku annaaa
Samsug వాషింగ్ మిషన్ 1e ప్రాబ్లెమ్ ప్లీజ్ వీడియో 👍👍👍
👍👍👍👍
Tqvm
We have the same model, what is the cost of that valve?
Hi, I dont know the price I just removed the dirt frm outlet hole
Puwede home service po.
Good day
Yong samsung ko po.. bumabalik sa 19 yung timer...paano po ma fix yon
Salamat sa sagot po
San po pwede makabili ng ganyang oart sa washing machine sana po masagot nyo ,thankyou pooo
sa samsung service center po
I bought in LAZADA for 500+ and it's working well 🥰
hello same problem here, as per samsung tech, but the parts cost 3,200. i hope someone can help me where can i buy or order online with good price. TIA
I get the part from LAZADA at 526 pesos here in Ph
Me a have different problem. The machine continuously take water and not stop. Someone can help me please
Patulong ngapo.. Ginaya kunamanpo po ung ginawa nyo. Ayaw parin lumabas ung tubig.. Check kupo ung supply sa coil wala po supply.. Ibig pubang sabihin sira po ang controller board.. Pa help nman po..
Parihas tayo
Same here ...walang tubig na lumabas, buti nlang may available sa inlet valve sa shoppe
@@mharusman9492 ano name po or link sa shoppe
Hello. I cleaned the solenoid but i keep getting the error 4c. During the error it seem water is also drained at the same time. What could be the issue. Some times ago i also get the error LC
There is also no voltage in the solenoid when the error appears. Does it mean the board is faulty?
F'$