Thank you!!! Very grateful I don't have to spend a fortune buying this from Amazon. Very nice solution to my folding table. Excellent demo! Please leave the awful music out, and put some text for names of stuff.
MagiDeal 6 Pieces 8mm Stainless Steel Kayak Paddle Spring Clips Outdoor Camping Tent Pole Snap Button Clips Single End www.amazon.com/dp/B078V4C74W/ref=cm_sw_r_cp_api_glt_fabc_5SNGKGVXYNNWZ5576YAR
Great Video. Do you guys have angle connectors to connect two pieces of aluminum? For example, a 1 1/4" fitting that slides over the 1" tube and allows another tube to be fitted to the 1" tube at an angle (90, 75, 45, 30, etc). That in combo with these locking buttons would make for weld free joins to make virtually anything you could make with PVC and couplers.
You have two options: 1. Use this from Amazon for attaching this leg to wood table (or metal). 2 Pack Folding Bracket-Self-Locking Hinge-Leg Fittings and Angle Braces-for Folding Legs 2. Use 80/20 brand extruded aluminum instead of aluminum tubing, and they have all the right fittings. They may also have a fitting for tubular aluminum like this.
I was thinking the same thing, for my telescoping aluminum pole which uses round tubes. These clips would probably be hard to align with the holes in a round tube, because round tubes rotate.
What are the actual clips called? I wand to make some pvc tube legs but I've hit a wall trying to find where to get them or what their actual specific name is
@@RGun90 I'm in Australia. The postage cost would end up making these $10 a piece. Found some anyway. Thanks all the same. Needed ones to fit a 43mm tubing
Thank God you're kind of local. I've been Google searching and Google searching forever for a freaking store that sales these. I will definitely be in to buy some. Do you know where I can get square tube connectors, and end caps etc as well? Thank you, so glad I re watched this video three times, but this time to the end and then I saw 509. Saweet deal!
@@jomzmanalo7272 Dam from 5 years ago. I never knew so I Googled "Release pin, lock pin, locking finger press pin, telescoping lock pin" till I found them. Pretty sure got a 10 pack off E-Bay.
Here as well MagiDeal 6 Pieces 8mm Stainless Steel Kayak Paddle Spring Clips Outdoor Camping Tent Pole Snap Button Clips Single End www.amazon.com/dp/B078V4C74W/ref=cm_sw_r_cp_api_glt_fabc_5SNGKGVXYNNWZ5576YAR
Hi Robert, there is enough pressure from the spring that keeps the button in the hole. As long as you use the right size spring inside of the right size tube. It will not slide down. This particular spring fit inside of our 1" x 1" x .110" wall tube.
I was looking for a simple locking mechanism for tube-in-tube, and this is a godsend. Thanks mate XD
My life is a lie, i thought that underneath that metal ball is a spring
It is a spring, just a flat one.
Thank you!!! Very grateful I don't have to spend a fortune buying this from Amazon. Very nice solution to my folding table.
Excellent demo! Please leave the awful music out, and put some text for names of stuff.
What's its maximum load? assuming I'm gonna use it to make a table, for example
I'm glad that I found this video, and that you we're local. I was able to get my parts for my project made in a matter of minutes. Thank you again! :)
what is the name of that spring part which holds the tubes?
Nice.. i need it for my self defence rod..
Where can I get that pin from?
MagiDeal 6 Pieces 8mm Stainless Steel Kayak Paddle Spring Clips Outdoor Camping Tent Pole Snap Button Clips Single End www.amazon.com/dp/B078V4C74W/ref=cm_sw_r_cp_api_glt_fabc_5SNGKGVXYNNWZ5576YAR
L
F
How can i get that pin .. please send me the address 🙏
this very usefull knowledge. Thank you sir
how can i stop the tubes to do not go away?
damn that's simple
Ditch the awful background “music”
Otherwise, great demonstration.
advise what is ideal if i am using 5/8'' to fit inside 3/4''
what is the different sizes of the two metal squares demonstrated in your video
That music Gd 🤮
Short, sweet, and to the point.
Great Video. Do you guys have angle connectors to connect two pieces of aluminum? For example, a 1 1/4" fitting that slides over the 1" tube and allows another tube to be fitted to the 1" tube at an angle (90, 75, 45, 30, etc). That in combo with these locking buttons would make for weld free joins to make virtually anything you could make with PVC and couplers.
did you find out?
You have two options:
1. Use this from Amazon for attaching this leg to wood table (or metal). 2 Pack Folding Bracket-Self-Locking Hinge-Leg Fittings and Angle Braces-for Folding Legs
2. Use 80/20 brand extruded aluminum instead of aluminum tubing, and they have all the right fittings. They may also have a fitting for tubular aluminum like this.
thanks for this useful video
Nice
Do these clips work the same on round tubing? Is there specific type for round?
I was thinking the same thing, for my telescoping aluminum pole which uses round tubes. These clips would probably be hard to align with the holes in a round tube, because round tubes rotate.
I really hope this helps me win the Sound Contest from my local radio station. Sounds exactly like it.
Thanks for this information.
thank you soo much, I've been searching so long for a video like this
What are the actual clips called? I wand to make some pvc tube legs but I've hit a wall trying to find where to get them or what their actual specific name is
Hi Darren, we stock two different sizes that you can purchase right off of our website. alcobrametals.com/telescopic-tubing/push-button-insert/
Look up "Snap Buttons" on Grainger's website. Way cheaper and many more choices than this place. ($5+ PER PIN?!? What an absolute joke @Alcobra...)
@@RGun90 I'm in Australia. The postage cost would end up making these $10 a piece. Found some anyway. Thanks all the same. Needed ones to fit a 43mm tubing
Paddle springs clips
Штука классная, а где взять эту кнопку? Как она называется?
You can buy these direct from our website. www.alcobrametals.com
Alcobra Metals Inc.
Is this strong lock
Very strong. Have no fear.
Hi eastern WA
Thank God you're kind of local. I've been Google searching and Google searching forever for a freaking store that sales these. I will definitely be in to buy some. Do you know where I can get square tube connectors, and end caps etc as well? Thank you, so glad I re watched this video three times, but this time to the end and then I saw 509. Saweet deal!
What size tubes were those?
Cuánto te peso aguanta
Just bought and did this last week, yep, that easy.
what name is the product?
What do you call in that lock?
@@jomzmanalo7272 Dam from 5 years ago. I never knew so I Googled "Release pin, lock pin, locking finger press pin, telescoping lock pin" till I found them. Pretty sure got a 10 pack off E-Bay.
@@ihsanpohan See above.
What is the weight bearing capability of that?
THANKS HELP ME ALOT...
where d you buy the parts?
I found them here alcobrametals.com/products/telescoping-tube/telescoping-locking-push-button/Push%20button%20inserts
Here as well MagiDeal 6 Pieces 8mm Stainless Steel Kayak Paddle Spring Clips Outdoor Camping Tent Pole Snap Button Clips Single End www.amazon.com/dp/B078V4C74W/ref=cm_sw_r_cp_api_glt_fabc_5SNGKGVXYNNWZ5576YAR
Thank you bro..
Very clever
Thanks
test
The wacky circus music has to go.
what is keeping the spring button in place? Might it not slide down?
Hi Robert, there is enough pressure from the spring that keeps the button in the hole. As long as you use the right size spring inside of the right size tube. It will not slide down. This particular spring fit inside of our 1" x 1" x .110" wall tube.
how did you get those holes indented?
Drill bit
Could a person make this telescoping pole out of tough plastic using 3D printer?