Came here for it, scrubbed ahead to watch it, and impressed he nailed it. Justin even improvises this live and often doesn't play it exactly like this, assuming because it's so hard.
Been playing for 15 years and had all sorts of gear and preamps, this tone is unbelievably great 👍 Very few people have been able to get that tone on youtube
becase thehnicaly,i u se that finger to control/gripp the damn guitar,but is good that i see here,the control in in your palm,so u can actually use tumb for more:P
Excellent job! I'm curious about your signal chain; after the pedal board, are you mic'ing two cabinets, and mixing them with one of the demeter VTBP-201(S)'s DI's and a Sansamp BDDI XLR out? I saw there are two BDDI's in your rack, so I'm assuming one is either a backup, or is being run into one of the other signal chains? I really dig your toggling of the dirty amp in and out of the mix - I was unaware that Justin might do that live (IIRC in the Dunlop TV rig rundown his bass tech said that both amps were always run all the time - at least live). In any case, it sounds great! Spiral out!
Thanks! I'll be doing a gear breakdown post TOOL catalog. But for a "snapshot" yes I run a dirty and clean side (via the a/b box in the vids) I mic the 10's on each side. The 15 is dirty with a 2x10 to boot on top. One Dem is clean the is other dirty , run Sans thru FX send return (one is direct). The final result is in the mixer just to the side of the rig > IEM I'll go into greater detail upon my rig rundown -A lot to discuss Thanks again:)
that low F at 1:02 is deceptively hand-busting. kudos!
Came here for it, scrubbed ahead to watch it, and impressed he nailed it. Justin even improvises this live and often doesn't play it exactly like this, assuming because it's so hard.
Yep! I play a lot of TOOL on bass and that riff is something I still struggle with. It's what I look for with any 46&2 bass cover. Dude killed it!
This has got to be one of the most accurate tone recreations out there
It’s not recreation it’s exactly that tone)
The Wal basses have the preamps requiered for the tone
@@FidelIsaacVargas this is a wal clone, and the original song was recorded on a single pickup MM stingray, same with Pushit and H.
Been playing for 15 years and had all sorts of gear and preamps, this tone is unbelievably great 👍
Very few people have been able to get that tone on youtube
amasing tehnichical
Incredible playing! Incredible set up!
Thanks a lot!
Awesome stuff. Would love to see Rosetta Stoned.
Great job, nice and tight!
Amazing!
Danny, this is freakin awesome!
Thanks for the visit ROCKER! Much appreciated:)
becase thehnicaly,i u se that finger to control/gripp the damn guitar,but is good that i see here,the control in in your palm,so u can actually use tumb for more:P
hm:P good one,is actually use tumb finger,is a trick that Justin is using and gives u another' grip/sound/split sec note:P
Awesomeeee! Is that a real Wal bass guitar?
Man, how can you not headbanging while playing this? Lol
Btw, great job
Excellent job! I'm curious about your signal chain; after the pedal board, are you mic'ing two cabinets, and mixing them with one of the demeter VTBP-201(S)'s DI's and a Sansamp BDDI XLR out? I saw there are two BDDI's in your rack, so I'm assuming one is either a backup, or is being run into one of the other signal chains?
I really dig your toggling of the dirty amp in and out of the mix - I was unaware that Justin might do that live (IIRC in the Dunlop TV rig rundown his bass tech said that both amps were always run all the time - at least live). In any case, it sounds great!
Spiral out!
Thanks!
I'll be doing a gear breakdown post TOOL catalog.
But for a "snapshot" yes I run a dirty and clean side (via the a/b box in the vids) I mic the 10's on each side. The 15 is dirty with a 2x10 to boot on top. One Dem is clean the is other dirty , run Sans thru FX send return (one is direct).
The final result is in the mixer just to the side of the rig > IEM
I'll go into greater detail upon my rig rundown -A lot to discuss
Thanks again:)
@@dlear73 Awaiting gear breakdown!!
great sound. Can you share the pedal settings you used to get this tone?
So what bass are you using I'm not seeing a wal logo on headstock
@@Randommishaps…not
What bass mate? Is it a Wal or a copy?
Looks like a really well made copy. Who cares though, sounds killer and the guy plays it even better so
@@d3lt452 Agreed just wondered if he would reply to confirm ;)
Not a single imperfect note on the G...WOW!!!
what was that intro💀
its like that on the album, its a little track called Useful Idiot