Hedrick, I grew up in Newark Valley, and went to Alfred State - class of ‘87. I studied engineering science and went on to RIT for mechanical engineering. Brother went to ASC (class of ‘77) as did my father when he got back from WWII (class of ‘48). And my roommate studied building trades and drove to wellsville every day. Love the saw horses. I make one longer so they nest cleaner. Thanks for clear instructions. Scott, Vass, NC.
This man is so confident in building sawhorse. He has gained that confident by building planty sawhorses over the years...so I trust him when it comes to building sawhorses... Thanks Herrick
I typically don't like long videos but I watched this one with much interest from start to finish. Crafted just as nicely as your sawhorses, Herrick. Great job!
Yes, that is a proper sawhorse! I shake my head when i see videos of how to build saw horses that don't have compound legs which are less strong and tippy, potentially dangerous.
Good video, I didn't think I would see anyone using that table saw ever. I have one I purchased at a garage sale 40 years ago for $100. It's been a great table saw, still use it.
I found you by accident, but I'm glad I did! It's very rare for me to run across people that think like me. You explain things clear and concisely. I will learn much. Thank you!
Bravo! I'm enjoying learning from your videos. I've been building a long time, and like to call what i do scrapentry rather than carpentry. Using lots of salvage/found wood and materials, and employing lil tricks to make it faster. I love you methods, video presentation and these sawhorses are a beautiful introduction to compound angles that I will be recommending to anyone interested in the future. Thanks Herrick!
I like the video and appreciate the length and detail. Sawhorses may very well be the first thing many build. For a tray I prefer hardware cloth as it doesn't collect sawdust. I only use a tray on one for better stacking. To stack I make hoses differently from video and each other. Bottom horse has shorter flush ends, top horse is longer, braces and gussets inboard on bottom horse, outboard on top horse. Top horse is longer. This all makes them nest nicely. Also I don't rip the entire edges to get the angle just what I need, with a handsaw at ends.
That is one of the nicest sawhorses that I've ever seen. In my life I've been on numerous job sites and have never seen a sawhorse that nice, Great Job Sir! and now that I'm retired I'll make a set for myself to have around the shop.
Excellent video, with very concise instructions. I bought the plans and have my A-B block all set, thank you for the miter angles. As the other comments mention, I made one wider so they stack perfectly. Jim
Enough so the top one will stack on the lower one.@@emoycoYou move the 2x4 in on one side on the lower one, and out on the upper one, then they stack nicely.
Very nice. There are more versions of saw horses on TH-cam than we can count. Leah at See Jane Drill shows an I-Beam style that I’ve found to be great. Even contractors working on my house have used them. No complaints from anyone. They’re a simpler build and have many of your features.
A friend made me a similar horse years ago. He learned that style while in the union school in Chicago. One difference, his style has 1/4" plywood to make the middle braces into a tray.
I like the video and appreciate the length and detail. Sawhorses may very well be the first thing many build. For a tray I prefer hardware cloth as it doesn't collect sawdust. I only use a tray on one for better stacking. To stack I make hoses differently from video and each other. Bottom horse has shorter flush ends, top horse is longer, braces and gussets inboard on bottom horse, outboard on top horse. Top horse is longer. This all makes them nest nicely. Also I don't rip the entire edges to get the angle just what I need, with a handsaw at ends.
Hi Clark, That's nice to know. I believe this horse design was once very common among carpenters and it was considered something of a "rite of passage" for an aspiring carpenter to make a set of horses like this. Mr. Burdick, my building trades teacher at Alfred State back in 1979, was an old-time carpenter. The other teachers in the program were much younger. I modified the horses we made back then by beveling the top 2x6 and by eliminating the shelf that was typically in the lower portion of the horse. Those modifications rendered a horse that is easier to make, lighter in weight, and more versatile. Thanks for the comment.
@@herrickkimball My grandfather built with hip roofs in the 1950s. He got lumber by tearing down buildings in the 1920s and built chicken coops with it. In the 50s he turned his 5 acres into 1/4 acre lots and built homes out of the 100 year old lumber. He built homes with a hand saw and hand planes. In 1982 the wife and I built a super insulated solar home with power saws and no hip roofs. I made saw horses from plans in a Rodale publication. They were like yours in angles, but had a tool tray. They were heavy. If I had life to do over, I would copy your saw horses.
Vielen Dank aus Deutschland. Wir in Deutschland, sagen dazu Böcke. Aber solch gute Qualität, wie in Deinem Video, gibt es die nicht zu kaufen. Also mache ich diesen mir jetzt selbst. In verschiedenen Höhen. in verschiedenen Stärken. Nochmals, vielen Dank.
Built 4 of these today only I didn't read carefully before I started. Thought the top 2x6 was 36 inches long. It is 33" in your plans so when I got to the long side braces, mine were cut too short. I could have moved the pieces up 3.5" but I decided to cut long side braces 34-9/16" and then used the scraps to make the end pieces for another 5 saw horses. I made all my angle cuts and mortises on a table saw and a cross cut sled. I screwed a strip of wood to the B angle and cut my legs and long side braces and mortices then repositioned the strip to the A angle and cut all my end pieces. The only other trick I use is to make screw hole layout tools by making one extra piece of all the pieces and screw in screws so they stick through by 1/16" or so and I can just line up my tool against the piece to be marked and I press the tool on and voila my next piece is instantly marked and center punched for drilling.
Wow. That's a lotta sawhorses. Very nice! When I worked for a building contractor in the 1980s the whole crew (5 of us) got together on a Saturday and made these sawhorses for ourselves. Our boss paid for the wood and we made them on our own time. We also made a shorter version for the company and called them saw ponies. 👍
Hello Herrick from the other side of ‘the pond’. Well done in explaining so beautifully slowly and clearly. You make me want to make this just for the joy of making it even though I don’t need one! Just one question if I may, how did you decide 29” is good for you? Is it a proportion of your personal height, perfect for working on you ceiling or something? Many thanks and. Best wishes from 🇬🇧.
Been building 42” PT horses with bull nose legs gusseted square at the end and collared with PT plywood with no lower stretchers. With the last pair I built I made one shorter and narrower so they nest tight top rail to top rail. Longer horses make handling plywood easier. Gorilla glue has too short a shelf life.
These were always my preferred horses, if I had a little extra time. Otherwise, if you need to “hit the ground running”, just go with the standard upside down T-top style (not an I-beam). These will take an extra ~20 minutes with the ripping and notching. Unless the horses were going to need to support a ton of weight, I would always go with a single stretcher, instead of both sides. It just makes them a little more comfortable to carry, when moving your set-up (especially if you’re wearing shorts.) The leg splay (A), is 15°. The leg angle (B), relative to the top, is 10°. I know you’re not supposed to do it, but they do make a handy (and relatively comfortable) short scaffold. Just don’t use them for that when the safety director or OSHA is on site 😜.
Hey: I watched your video, and I really liked the content, detail, and description documenting how to build carpenter's sawhorses...very well done. I am in need of a pair of extra heavy duty sawhorses. Do you have any construction plans for supersizing these sawhorses? Many thanks.
No. These are as strong as any carpenter would ever need. I’ve put enormous amounts of weight on them at times and they have never failed. There are other TH-cam videos showing how to make heavy sawhorses. Thanks for the question.
This is a great video. My only nit-picking comment is that there is no "th" in height. I don't know why, but that drives me nuts. In all seriousness, though, I loved this video.
Hedrick, I grew up in Newark Valley, and went to Alfred State - class of ‘87. I studied engineering science and went on to RIT for mechanical engineering. Brother went to ASC (class of ‘77) as did my father when he got back from WWII (class of ‘48). And my roommate studied building trades and drove to wellsville every day. Love the saw horses. I make one longer so they nest cleaner. Thanks for clear instructions. Scott, Vass, NC.
I was thinking the same thing about the nesting part.
Excellent. Learnt a lot
I am not a very good carpenter, but watching your videos will help me improve, thanks
This man is so confident in building sawhorse. He has gained that confident by building planty sawhorses over the years...so I trust him when it comes to building sawhorses...
Thanks Herrick
Very nice! I'm old enough to remember when building a pair of sawhorses was a job application on the jobsite.
Yep and I remember being able to quantify a new-hires hourly wage by watching how and what style horses he would make.
Great video, clearly explained and presented producing an outstanding saw horse.
Most enjoyable. Excellent crafstmanship with an explicit explanation. Thank you.
I typically don't like long videos but I watched this one with much interest from start to finish. Crafted just as nicely as your sawhorses, Herrick. Great job!
I sure do appreciate your comment, Ray. Thank you!
Your video was flawless just like your sawhorses...Thank you for sharing...Charles
Yes, that is a proper sawhorse!
I shake my head when i see videos of how to build saw horses that don't have compound legs which are less strong and tippy, potentially dangerous.
A marvelous sawhorse and perhaps the best one, I saw till date. Thanks for sharing your ideas.
My mind is now officially blown. I never considered reinforcing the ends of a board with screws to stop splitting. 18:40
Nice video!
Good video, I didn't think I would see anyone using that table saw ever. I have one I purchased at a garage sale 40 years ago for $100. It's been a great table saw, still use it.
You're very good at this. I appreciate you taking the time to make the video. Well done. Darren
I found you by accident, but I'm glad I did! It's very rare for me to run across people that think like me. You explain things clear and concisely. I will learn much. Thank you!
Really enjoyed watching this and plan to build a couple. Thanks!
Bravo! I'm enjoying learning from your videos. I've been building a long time, and like to call what i do scrapentry rather than carpentry. Using lots of salvage/found wood and materials, and employing lil tricks to make it faster. I love you methods, video presentation and these sawhorses are a beautiful introduction to compound angles that I will be recommending to anyone interested in the future. Thanks Herrick!
I'm glad to see that you are still full of all kinds of "whizbang" idea's and projects Herrick! ~Russ
I like the video and appreciate the length and detail.
Sawhorses may very well be the first thing many build.
For a tray I prefer hardware cloth as it doesn't collect sawdust.
I only use a tray on one for better stacking.
To stack I make hoses differently
from video and each other. Bottom horse has shorter flush ends, top horse is longer, braces and gussets inboard on
bottom horse, outboard on top horse.
Top horse is longer.
This all makes them nest nicely.
Also I don't rip the entire edges to get the angle just what I need, with a handsaw at ends.
Very nice!
Excellent presentation.
Fantastic video. Thank you for all of the detail and advice.
That is one of the nicest sawhorses that I've ever seen. In my life I've been on numerous job sites and have never seen a sawhorse that nice, Great Job Sir! and now that I'm retired I'll make a set for myself to have around the shop.
Excellent video, with very concise instructions. I bought the plans and have my A-B block all set, thank you for the miter angles. As the other comments mention, I made one wider so they stack perfectly. Jim
How much wider?
Enough so the top one will stack on the lower one.@@emoycoYou move the 2x4 in on one side on the lower one, and out on the upper one, then they stack nicely.
This will be a good project
Very nice. There are more versions of saw horses on TH-cam than we can count. Leah at See Jane Drill shows an I-Beam style that I’ve found to be great. Even contractors
working on my house have used them. No complaints from anyone. They’re a simpler build and have many of your features.
Great video. It was a joy to watch. The only change that I would make is that I would glue every joint on the horse, not just the legs to the top.
Hi Bill,
Thanks for the positive feedback. Always nice to hear. 👍
And gluing everything is a fine way to do it.
Good stuff, Herrick. The helper block is a valuable timesaver. Thanks for the video and the plans - looking forward to making some of these.
Great video! Nicest sawhorses I’ve used! Very sturdy and light weight.
And you would certainly know. 🙂
Thank you, Robert.
Great instruction on a well designed horse.
Thank you. I appreciate that! 👍
A friend made me a similar horse years ago. He learned that style while in the union school in Chicago. One difference, his style has 1/4" plywood to make the middle braces into a tray.
I like the video and appreciate the length and detail.
Sawhorses may very well be the first thing many build.
For a tray I prefer hardware cloth as it doesn't collect sawdust.
I only use a tray on one for better stacking.
To stack I make hoses differently
from video and each other. Bottom horse has shorter flush ends, top horse is longer, braces and gussets inboard on
bottom horse, outboard on top horse.
Top horse is longer.
This all makes them nest nicely.
Also I don't rip the entire edges to get the angle just what I need, with a handsaw at ends.
Thank you very much, I learned wonderful things from you.
Fantastic video. New subscriber. Looking forward to learning from you. Thank you for sharing your wealth of knowledge.
Wow, I think I can smell the sawdust. Enjoyed this very much..
Great video, Herrick. Wish I had seen it sooner. I need a pair of these. I only hope I can find some time to build them. Hope you and yours are well.
Hi Jim,
Nice of you to comment here. Thank you for the plans purchase. Best wishes. 👍
My grandfather was still building homes in 1955 and had made those kind of saw horses.
Hi Clark,
That's nice to know. I believe this horse design was once very common among carpenters and it was considered something of a "rite of passage" for an aspiring carpenter to make a set of horses like this. Mr. Burdick, my building trades teacher at Alfred State back in 1979, was an old-time carpenter. The other teachers in the program were much younger. I modified the horses we made back then by beveling the top 2x6 and by eliminating the shelf that was typically in the lower portion of the horse. Those modifications rendered a horse that is easier to make, lighter in weight, and more versatile. Thanks for the comment.
@@herrickkimball My grandfather built with hip roofs in the 1950s. He got lumber by tearing down buildings in the 1920s and built chicken coops with it. In the 50s he turned his 5 acres into 1/4 acre lots and built homes out of the 100 year old lumber. He built homes with a hand saw and hand planes. In 1982 the wife and I built a super insulated solar home with power saws and no hip roofs. I made saw horses from plans in a Rodale publication. They were like yours in angles, but had a tool tray. They were heavy. If I had life to do over, I would copy your saw horses.
Your outdoor table saw is exactly like mine.
New sub, excellent presentation, very thorough.
Very good video and product. Thanks for sharing. Great saw horses!
Vielen Dank aus Deutschland. Wir in Deutschland, sagen dazu Böcke. Aber solch gute Qualität, wie in Deinem Video, gibt es die nicht zu kaufen. Also mache ich diesen mir jetzt selbst. In verschiedenen Höhen. in verschiedenen Stärken. Nochmals, vielen Dank.
Brilliant helper block.
Awesome! These truly are so handy
Thank you. I learnt a lot
Very nice job😊👍
Great job
Built 4 of these today only I didn't read carefully before I started. Thought the top 2x6 was 36 inches long. It is 33" in your plans so when I got to the long side braces, mine were cut too short. I could have moved the pieces up 3.5" but I decided to cut long side braces 34-9/16" and then used the scraps to make the end pieces for another 5 saw horses. I made all my angle cuts and mortises on a table saw and a cross cut sled. I screwed a strip of wood to the B angle and cut my legs and long side braces and mortices then repositioned the strip to the A angle and cut all my end pieces. The only other trick I use is to make screw hole layout tools by making one extra piece of all the pieces and screw in screws so they stick through by 1/16" or so and I can just line up my tool against the piece to be marked and I press the tool on and voila my next piece is instantly marked and center punched for drilling.
Wow. That's a lotta sawhorses. Very nice! When I worked for a building contractor in the 1980s the whole crew (5 of us) got together on a Saturday and made these sawhorses for ourselves. Our boss paid for the wood and we made them on our own time. We also made a shorter version for the company and called them saw ponies. 👍
Hello Herrick from the other side of ‘the pond’. Well done in explaining so beautifully slowly and clearly. You make me want to make this just for the joy of making it even though I don’t need one! Just one question if I may, how did you decide 29” is good for you? Is it a proportion of your personal height, perfect for working on you ceiling or something? Many thanks and. Best wishes from 🇬🇧.
Been building 42” PT horses with bull nose legs gusseted square at the end and collared with PT plywood with no lower stretchers. With the last pair I built I made one shorter and narrower so they nest tight top rail to top rail. Longer horses make handling plywood easier. Gorilla glue has too short a shelf life.
These were always my preferred horses, if I had a little extra time. Otherwise, if you need to “hit the ground running”, just go with the standard upside down T-top style (not an I-beam). These will take an extra ~20 minutes with the ripping and notching. Unless the horses were going to need to support a ton of weight, I would always go with a single stretcher, instead of both sides. It just makes them a little more comfortable to carry, when moving your set-up (especially if you’re wearing shorts.) The leg splay (A), is 15°. The leg angle (B), relative to the top, is 10°. I know you’re not supposed to do it, but they do make a handy (and relatively comfortable) short scaffold. Just don’t use them for that when the safety director or OSHA is on site 😜.
Really interesting..
Thanks, great tutorial
I am a new subscriber. Where is the PDF file? Good job
Thanks for asking. You can get there from here... www.planetwhizbang.com/worshop
Thank you.
Hey: I watched your video, and I really liked the content, detail, and description documenting how to build carpenter's sawhorses...very well done. I am in need of a pair of extra heavy duty sawhorses. Do you have any construction plans for supersizing these sawhorses? Many thanks.
No. These are as strong as any carpenter would ever need. I’ve put enormous amounts of weight on them at times and they have never failed. There are other TH-cam videos showing how to make heavy sawhorses. Thanks for the question.
Does the pdf include modification & best cuts of wood?
Im wondering if i could make this slightly larger
Thank you! How can I get a specification package or pdf mentioned in the video?
Wonderful thank you
Awsome Video . Thx so much
The chisel is good for cleaning up the notch BUT a Farriers rasp is better!
What the angle on the helper block? A and b please
Impressive
Would you mind showing the pdf 3d sketch
This is a great video. My only nit-picking comment is that there is no "th" in height. I don't know why, but that drives me nuts. In all seriousness, though, I loved this video.
Can't see the classic horse plan advertised. How do I get it?
www.planetwhizbang.com/worshop
You don’t tell us the angles to make the little template
i bought my first ones at home de[ot for 50 each and they are not even and wobble. its time i build one from master herrick kimball guidance
Where is the PDF for this project
www.planetwhizbang.com/worshop
can i just order one fro you. i am not worthy
You can do it! 👍