Fantastic recommendation saved me getting ‘just a switch’ - loved the carve out to make the switch fit in the space, great innovation - top solution - all the best, David 👍
There a great little unit . They also come with no light as well if you take a look about and I wish we had got them sooner cos I wouldn’t need to make it fit in a swich mate . Thanks for watching
Great video once again, s I decided to follow your example and ordered some from Amazon. Mine came it’s four cables. Two red. One black and one white. Only problem is, mine have two wires. One red and oberen and black…. Any ideas?
The cables should be marked up on the actual cable or in the instructions buddy . If I was to guess I’d say red to supply live . Other red to the light . Black to supply earth and white to light earth
It’s pretty easy bud The switch has 4 cables Pos and neg go to the battery Pos and neg go to the device A lot of people think they can put the negatives together you can’t But they are on the actual cables . They have tabs on them telling you what wire goes to what mate Hope this helps
@@UrbanVanlife hiya so the ones i bought from amazon (link in the description) dont have the labels on the cables. so i dont know which cables go to the battery and the others to the lights.
Awww Poppy. Glad you blasted those large words that it wasn't Emma. Would have hated for you to show up in the next video in a body cast LOL. I need to just ignore the whole conversation about the issue with the switch being too small. Moving on! lol. That's a really awesome tiny switch. I kind of like that it lights up blue. Never getting a Lambo? That's a bummer. Funny how you can plan a video and a few other people have the exact same idea around the same time. Have had that happen before. Nice job with the little switch. See you on the next one :)
lol yer she would put me in a hole i think , i had to own up to me being fussy , and that alllways happens to me with videos , i think no ones done this ill do it and then boom a video comes out before iv edited mine and its kind of the same , so i might leave it for a few weeks to post cos it looks like im copying , but then again who cares , hope you guys are all doing well and loving life , thansk guys
Innit the mains as in 240v . I don’t mate cos our system is 12v . But most of them lights come with a plug and conectors thst reduces the 240 to 12 and it’s a simple plug vans play
HI , I have had the same kind of problem with the light (blue ring light) glowing when off , changed the wire's around (ie red switch wire to black van wire and black switch wire to red van wire and hey presto all worked as it should
been looking at some like it and i think for your set up its not bad but I think in my small cab its going to be one more light that will be on when trying to sleep. I think they have some without the light so I'm going to be looking into those. thanks for the review and how to sr
Yer I’m not happy about the light .. I may open it up and see if I can disable the led on it to be honest mate cos they do give off quite a lot of light in the dark
Dimmer doesn't work with common negative systems :-( Hi, thanks for a great video, I've been looking for a solution for our motorhome which has LED strips all over on one switch. Unfortunately it's wired so all the positives to the lights go back to the switch, but the negatives are wired to different points around the van. I've found these dimmers don't work if you wire the output negative to the common van negative, the lights just stay on full. Can anyone recommend a dimmer that works in this scenario?
Yer mate 2 are your pos and neg from the (let’s say the battery ) and then the other 2 are pos and neg to the light . It just goes in the chain is ya get me . I should have shown that . Sorry mate
That's interesting ours are still working and we haven't had any problems ..... but now that we have said everything i fine with them watch this space lol!!
Hi bro just got touch dimmer switch like you to tidy up van my grandchild played with old fashioned dimmer maybe touch one more of a challenge 😂how you wire them I have 4 wires at back is it one pair to a switch others to lights led I have 😊
The wires should be labeld mate or there should be instructions with it . But basically one side of the swich is pos and Neg to the feed and the other is pos and neg to the light . They have to be wired exactly that way cos it’s a negative dimmer
@@UrbanVanlife yes can see now they were no labels just stripes on 2 wires of 4 I guessed it didn’t matter which pair use for power will wire to a switch I have spare from before thanks 🙏
@@UrbanVanlife can’t get them work on dim wired to switch and just on all time I’ve got 3 way switch one end earth middle is power other end goes to light I’ve wired one side dimmer to power and earth other side to earth and source it’s on all time so just swapped source side of dimmer swapped leads over
@@UrbanVanlife But why would they make 'em all the same size, mate? That's what they make electrical tape for! A few wraps of tape and you don't need any posh retrofit with the throwaway parts!
Awesome neil. Would you happen to know why i have the blue light on but the lights dont turn on. I did earlier. (Whilst testing it) just not now after installing it
Baggy hole :P That wire shrink wrap solder thing is pretty genius. That switch would be perfect on a computer desk and pretty much anywhere really. Be great for the bedroom too. Small and simple Love the touch style and dimmer ability.
Oh mate it’s a game changer in the van to be honest just have in the ability to dim the white only lights is lovely . Abs nice and simple as well . I posted you a letter this week as well
Yer it’s just pos and neg to the unit and then pos and neg to the light . People have had problems but mainly cos there connecting the both negatives together . Make sure they are wired to the correct wires . And yea I just snipped off the plug
Hahahaha if I had known you would have known . I only found them Monday abs was like there the balls them . So got a vid out ASAP . Sorry buddy I’ll get Emma to spank me . Lol
@@UrbanVanlife ok I did it and took me about 10-15mins. There's a fair bit of glue or resin that seals the wire. I tried to use a knife to cut away but all that did was make a groove. So I took the soldering iron and pressed into the small grove I made, the resin didn't melt but came away. I did only a bit and then the whole thing pulled out of the case. I picked off the 4 leds with my finger nail and put it back into the casing. It didn't work at first. After taking out and putting back in making sure the little springs were in casing ok it worked absolutely fine. So I will do the other ones now seeing as it all worked out. The blue lights are gone forever 😁 Good luck Edit- the 2nd one i forcefully pulled and it came out of casing...forget the whole soldering iron. Brute force did it lol
Nice one Neil. I think they look great..!! I'm converting a Citroen Dispatch and have bought one of these for ceiling lights... got mine for a tenner though...lol. Loving the build... Cheers 👍😁
Cracking vlog again guys and that's a neat little gadget that, are you any further on the investigation of the light and radio situation ?. Oh missed Emma on this one, love how yous bounce off each other (no pun intended nor implied 😂) hope you have a great weekend and Best wishes and stay safe and well to you both and your families ❤️ 💙 ❤️ 💙 ❤️
Heh Neil. I’ve got these switches now for myself. But I notice you solder 2 wires. But you have 4 wires coming out of the back of the new ones! Am I missing something?
Hey buddy, a positive and negative go to the 12 volt supply and a positive and negative go to the light, I soldered one end but used solder tubes the other end, hope this helps
@@UrbanVanlife Hi Neil. Cheers for that. That’s what I did and it works wonderfully. I sort of realised what you did after sending the comment. But heh we live and learn. Keep up the good work guys 😀
Having a similar problem to others here in that there's 4 wires, can't figure out how to wire them, lights are constantly on.. Any help?! I am aware what are the pos and neg wires and still spliced with the wires from lights and wires to batteries but no idea why aren't getting dimmer or the little blue light on?!?! Helpppp
ok so imagine pos an neg coming off the battery going to the light , if you cut both and attach the pos and and neg on the swich that are for the feed and the pos and neg to the light off the swich , the cables are marked if you read the instructions , which saddly i didnt lol once i had i realised that i had it wired the wrong way round ,
1:41 - "and the light dims" - that eyebrow/hat bounce made me laugh so much don't know why 🤣 These things seem great, having just mounted our LEDs, might put them in somewhere... 🙄😉
as soon as i seen them i was like ohhhhh my friends over at freedom striders will love these , they have a secret dimmer switch . im still die in to know what it is going to be ,
@@UrbanVanlife All shall be revealed when we get around to building it 🤣 Quest question, have you had any trouble with your strip LED's burning out since they are designed for 12V and van batteries are around 12.8-14.6V?
No not at all . Iv never ever thought of it as well but the max I have my battery’s is 13.8 and even that 1.8v extra there fine . And that’s been like that in the past 3 vans as well . We never had an issue . I don’t think Iv heard any one having a problem as well to be honest guys
The led lights we fitted where just normal ones mate . Just white . And the switch dose alll the work . Well it reduced the voltage to dim and reverse to brighten . It’s just a prettier way than a rotary swicj
@@UrbanVanlife I wonder if you could help me? I bought one using your link and it was delivered today. It's come with mini Jacks on it though which has confused me. I've worked our though, that male is negative and female is positive. I've made a circuit, from battery - positive wire to switch, from switch negative wire to light and then positive to battery again. The light comes on but the switch doesn't work. Either I've broken the switch in trying or I've got the wiring wrong. I know you're probably busy but if you have time to help I'd be really grateful. X
I managed to connect it. But then I felt the dimmer sensitivity was awful and then I lost the connection. Do you think it's worth persevering? I mean, have I got something wrong or shall I start looking for something else?
These are great. I have four not the same as yours I’ve only fitted one so far but I noticed that it’s draining my battery stupid because it has a blue light ring around it that always stays on :( not sure 🤔 why it’s draining my battery :(
Well I bought a couple of these switches, no idea how to wire it up. I can wire it up so the lights are Permanently on, and get the led to light up can't get it to switch off or dim. Any help appreciated.
Have you got all the pos and neg wires correctly wired . The wire with the text on it is the pos and the one with the white broken line is the neg from what I remember . That’s what I remember but on the cables it should have a silver tab telling you what’s what mate
Thanks yeah, that's what I figured, there's 2 sets of wires, did splice both negatives together and the positives together or did you only have to wire up one set?
Looks like the TH-cam police deleted my comment that the switches are available for £6.99 UK supplier on a certain auction website, it’s a pity they don’t delete troll comments as quickly.
its not even in the held section mate , but if you notice i re did the thumbnail and added your ebay find on it mate , so nice one bud id rather people get the cheapest they can , thanks again Andrew
Just to say, I sell led lighting for a living. Not every led strip is Dimmable. Yours is working fine, but unless u previously checked its a stroke of luck that they dimmed. A non-dimmable strip will flicker continuesly when dimmed. It will also dramatically reduce the life of your LED. Not to critise mate as I love your tutorials.
Innuendo bingo... 🤣🤣 holes and things... Come back Emma, you were certainly missing from this video. Im sure you would be able to read the name right 😏
![ทุกครั้งที่หลับตา (Lucid Dream) - AYLA's [ Official MV ]](http://i.ytimg.com/vi/4i1OBAQyv58/mqdefault.jpg)
Thanks for the video. Only video on TH-cam reviewing these. They look super simple. I like that they're a lower profile than a rocker switch.
Glad we could help 😃
Fantastic recommendation saved me getting ‘just a switch’ - loved the carve out to make the switch fit in the space, great innovation - top solution - all the best, David 👍
There a great little unit . They also come with no light as well if you take a look about and I wish we had got them sooner cos I wouldn’t need to make it fit in a swich mate . Thanks for watching
Great video once again, s I decided to follow your example and ordered some from Amazon. Mine came it’s four cables. Two red. One black and one white. Only problem is, mine have two wires. One red and oberen and black…. Any ideas?
The cables should be marked up on the actual cable or in the instructions buddy .
If I was to guess I’d say red to supply live . Other red to the light . Black to supply earth and white to light earth
makes sense with the built in dimmer, i've got 2 reading lights with the same switch built in and think they're great, well done Neilly Boy
Yer there so good appart from the led which I will try to disable . If I can
Hi Neil. I liked your delivery style. Any chance you could post up a wiring diagram?
Thank you.
It’s pretty easy bud
The switch has 4 cables
Pos and neg go to the battery
Pos and neg go to the device
A lot of people think they can put the negatives together you can’t
But they are on the actual cables . They have tabs on them telling you what wire goes to what mate
Hope this helps
@@UrbanVanlife thanks for getting back. Typically, as soon as I posted the question I realised what a dumbass I'd been.
@@UrbanVanlife hiya so the ones i bought from amazon (link in the description) dont have the labels on the cables. so i dont know which cables go to the battery and the others to the lights.
Go Go Gadget Neil!👉🔥😎
thanks buddy , im just the gadget man
Awww Poppy. Glad you blasted those large words that it wasn't Emma. Would have hated for you to show up in the next video in a body cast LOL. I need to just ignore the whole conversation about the issue with the switch being too small. Moving on! lol. That's a really awesome tiny switch. I kind of like that it lights up blue. Never getting a Lambo? That's a bummer. Funny how you can plan a video and a few other people have the exact same idea around the same time. Have had that happen before. Nice job with the little switch. See you on the next one :)
lol yer she would put me in a hole i think , i had to own up to me being fussy , and that alllways happens to me with videos , i think no ones done this ill do it and then boom a video comes out before iv edited mine and its kind of the same , so i might leave it for a few weeks to post cos it looks like im copying , but then again who cares , hope you guys are all doing well and loving life , thansk guys
👀👀 even though I might not be there I’m always watching and I always know 👀👀👀
@@emmaurbanvanlife120 LOL
Have you got a video of fitting those LED strips into the mains 😄
Innit the mains as in 240v . I don’t mate cos our system is 12v . But most of them lights come with a plug and conectors thst reduces the 240 to 12 and it’s a simple plug vans play
HI , I have had the same kind of problem with the light (blue ring light) glowing when off , changed the wire's around (ie red switch wire to black van wire and black switch wire to red van wire and hey presto all worked as it should
been looking at some like it and i think for your set up its not bad but I think in my small cab its going to be one more light that will be on when trying to sleep. I think they have some without the light so I'm going to be looking into those. thanks for the review and how to sr
Yer I’m not happy about the light .. I may open it up and see if I can disable the led on it to be honest mate cos they do give off quite a lot of light in the dark
I think they’re the mutts nuts
Thanks 🙏
Dimmer doesn't work with common negative systems :-( Hi, thanks for a great video, I've been looking for a solution for our motorhome which has LED strips all over on one switch. Unfortunately it's wired so all the positives to the lights go back to the switch, but the negatives are wired to different points around the van. I've found these dimmers don't work if you wire the output negative to the common van negative, the lights just stay on full. Can anyone recommend a dimmer that works in this scenario?
Nice one Neil, however you only showed connecting two wires, but there appears to be 4 wires on the dimmer, can you confirm and explain, thanks dave
Yer mate 2 are your pos and neg from the (let’s say the battery ) and then the other 2 are pos and neg to the light . It just goes in the chain is ya get me . I should have shown that . Sorry mate
@@UrbanVanlife hi, thanks 4 that, however it can make it a bit difficult if the switch only has two wires, I'd 12v to lamp. Thanks
I was struggling with this too. So 1 X POS and neg back to power supply and then the other pos and neg to the lights?
Hi I got same one but how did you wired? My switch has got 4 cables but you connected only 2 wire any advice please.
There's been some complaints on Amazon about the switch stops working or is sporadic in operation. The video is 8 months old. How have they held up?
That's interesting ours are still working and we haven't had any problems ..... but now that we have said everything i fine with them watch this space lol!!
Hi bro just got touch dimmer switch like you to tidy up van my grandchild played with old fashioned dimmer maybe touch one more of a challenge 😂how you wire them I have 4 wires at back is it one pair to a switch others to lights led I have 😊
The wires should be labeld mate or there should be instructions with it . But basically one side of the swich is pos and Neg to the feed and the other is pos and neg to the light . They have to be wired exactly that way cos it’s a negative dimmer
@@UrbanVanlife yes can see now they were no labels just stripes on 2 wires of 4 I guessed it didn’t matter which pair use for power will wire to a switch I have spare from before thanks 🙏
@@UrbanVanlife can’t get them work on dim wired to switch and just on all time I’ve got 3 way switch one end earth middle is power other end goes to light I’ve wired one side dimmer to power and earth other side to earth and source it’s on all time so just swapped source side of dimmer swapped leads over
Dimmer on but it’s not dimmable just stays on flickers bit when touch it can’t turn down .faulty ?
Yea neat modern, brill idea cuttin old switch case to suit.You great thinkin outside box clever if it doesn't fit make it fit.😎
Wouldn’t you have thought they would just make them all the same bloody size . Lol they are brilliant tho I’ll say that much
@@UrbanVanlife But why would they make 'em all the same size, mate? That's what they make electrical tape for! A few wraps of tape and you don't need any posh retrofit with the throwaway parts!
Mate I've got to give it to you.. fitting the new switch in the old casing is genius!! 👏🏻
Nice little switches and sweet vid.. 🤘🏻💪🏻
mate honestly i got them and was like noooooooooooooooooooooooooo there smaller , what can i do , but a little dick eyes y and boom sorted
@@UrbanVanlife love it 😆👊🏻
I give you a like because off the little dog
We have 2 little dogs which one?
Awesome neil. Would you happen to know why i have the blue light on but the lights dont turn on. I did earlier. (Whilst testing it) just not now after installing it
Baggy hole :P
That wire shrink wrap solder thing is pretty genius. That switch would be perfect on a computer desk and pretty much anywhere really. Be great for the bedroom too. Small and simple Love the touch style and dimmer ability.
Oh mate it’s a game changer in the van to be honest just have in the ability to dim the white only lights is lovely . Abs nice and simple as well .
I posted you a letter this week as well
Great idea. Is the wiring just positive and negative and did you just cut off the plug? Thanks, informative and entertaining
Yer it’s just pos and neg to the unit and then pos and neg to the light . People have had problems but mainly cos there connecting the both negatives together . Make sure they are wired to the correct wires . And yea I just snipped off the plug
Could of told me about these a week ago 🤣 I likey 🤣
Hahahaha if I had known you would have known . I only found them Monday abs was like there the balls them . So got a vid out ASAP . Sorry buddy I’ll get Emma to spank me . Lol
Topman. I was debating getting these. I ordered 3. Will see if I can kill the light on the switch👍
there so good arnt they , only thing i dont like is the blue led stays on which annoys me a little ,
@@UrbanVanlife im going to attempt to kill the blue light. Will let you know how that turns out 👍
Yer I’m going to open one up my self and see if I can disable it as well .
@@UrbanVanlife might need to carefully knock the square led off the psb
@@UrbanVanlife ok I did it and took me about 10-15mins.
There's a fair bit of glue or resin that seals the wire. I tried to use a knife to cut away but all that did was make a groove. So I took the soldering iron and pressed into the small grove I made, the resin didn't melt but came away. I did only a bit and then the whole thing pulled out of the case. I picked off the 4 leds with my finger nail and put it back into the casing. It didn't work at first. After taking out and putting back in making sure the little springs were in casing ok it worked absolutely fine.
So I will do the other ones now seeing as it all worked out. The blue lights are gone forever 😁
Good luck
Edit- the 2nd one i forcefully pulled and it came out of casing...forget the whole soldering iron. Brute force did it lol
Nice one Neil. I think they look great..!! I'm converting a Citroen Dispatch and have bought one of these for ceiling lights... got mine for a tenner though...lol. Loving the build... Cheers 👍😁
nice man , ib believe there even cheaper on ebay as well mate , im banned so i cant get them from there lol , long story
@@UrbanVanlife thanks for the tip. Will keep it in mind if I need any more in the future. Cheers 👍😁
Cracking vlog again guys and that's a neat little gadget that, are you any further on the investigation of the light and radio situation ?. Oh missed Emma on this one, love how yous bounce off each other (no pun intended nor implied 😂) hope you have a great weekend and Best wishes and stay safe and well to you both and your families ❤️ 💙 ❤️ 💙 ❤️
Thanks Mr W, you always write lovely messages! Hope you are well and I am planning my come back 😂😂😂
@@emmaurbanvanlife120 thankyou and you are very welcome. Yay an Emma comeback. 😂 😂.
She will be back in full force soon mate I’m going to let her out the boot
@@UrbanVanlife 😂 😂 😂
Thanks heaps - ordered one a few weeks ago and it says you can turn the blue light out but can’t figure out how to do that.
Any ideas please?
@@markhiggins3054 long press while switch is off should turn blue light off
Excellent, thanks.
You are welcome!
Thank you
Heh Neil. I’ve got these switches now for myself. But I notice you solder 2 wires. But you have 4 wires coming out of the back of the new ones! Am I missing something?
Hey buddy, a positive and negative go to the 12 volt supply and a positive and negative go to the light, I soldered one end but used solder tubes the other end, hope this helps
@@UrbanVanlife Hi Neil.
Cheers for that. That’s what I did and it works wonderfully.
I sort of realised what you did after sending the comment.
But heh we live and learn. Keep up the good work guys 😀
Evening love the switch idea silly question but would these switches be OK to use on the 12 volt downlights in the van
Hi ya, don’t see why not! 😁😁
Sneaky little fix, brilliant 👍
They are a good find
Cool video
I’ve had my eye on these for awhile for our crafter
I’ll be ordering some of these Dimmers
Yer there a nice touch 😂
Having a similar problem to others here in that there's 4 wires, can't figure out how to wire them, lights are constantly on.. Any help?!
I am aware what are the pos and neg wires and still spliced with the wires from lights and wires to batteries but no idea why aren't getting dimmer or the little blue light on?!?! Helpppp
ok so imagine pos an neg coming off the battery going to the light , if you cut both and attach the pos and and neg on the swich that are for the feed and the pos and neg to the light off the swich , the cables are marked if you read the instructions , which saddly i didnt lol once i had i realised that i had it wired the wrong way round ,
1:41 - "and the light dims" - that eyebrow/hat bounce made me laugh so much don't know why 🤣
These things seem great, having just mounted our LEDs, might put them in somewhere... 🙄😉
as soon as i seen them i was like ohhhhh my friends over at freedom striders will love these , they have a secret dimmer switch . im still die in to know what it is going to be ,
@@UrbanVanlife All shall be revealed when we get around to building it 🤣
Quest question, have you had any trouble with your strip LED's burning out since they are designed for 12V and van batteries are around 12.8-14.6V?
No not at all . Iv never ever thought of it as well but the max I have my battery’s is 13.8 and even that 1.8v extra there fine . And that’s been like that in the past 3 vans as well . We never had an issue . I don’t think Iv heard any one having a problem as well to be honest guys
Hi. Mine came with those dc connectors on the end. Did you just cut them off
Yer I cut them off . Just make sure you look at the instructions and what wire it what more importantly mate
Nice job bro! Gotta fill the hole!
A filled hole is a happy hole
That is neat!!! Looks great.
i think you need them for the jeffy wagon
Great vid, deffo gonna try them out! 👍
Just make sure you connect the cables properly . They are labeld but ppl don’t read the instructions . I’m also guilty of that
Are these already dimable lights or normal lights and switch does all the work?
The led lights we fitted where just normal ones mate . Just white . And the switch dose alll the work . Well it reduced the voltage to dim and reverse to brighten . It’s just a prettier way than a rotary swicj
Thanks for that. Will get some for my van now i have seen this.
Really helpful thank you 😊 can you tell me how much they glow in the dark (I mean, are they annoying when trying to sleep)
Ohhhh they are very bright and I’m not a fan . But you can get black and silver ones now with no led
@@UrbanVanlife thanks for getting back to me so quickly. I'll go for without then 👍👍👍
@@UrbanVanlife I wonder if you could help me? I bought one using your link and it was delivered today. It's come with mini Jacks on it though which has confused me. I've worked our though, that male is negative and female is positive. I've made a circuit, from battery - positive wire to switch, from switch negative wire to light and then positive to battery again. The light comes on but the switch doesn't work. Either I've broken the switch in trying or I've got the wiring wrong. I know you're probably busy but if you have time to help I'd be really grateful. X
I managed to connect it. But then I felt the dimmer sensitivity was awful and then I lost the connection. Do you think it's worth persevering? I mean, have I got something wrong or shall I start looking for something else?
These are great. I have four not the same as yours I’ve only fitted one so far but I noticed that it’s draining my battery stupid because it has a blue light ring around it that always stays on :( not sure 🤔 why it’s draining my battery :(
We took the light part out 🫣🫣
@@UrbanVanlife oh is that easy to do? Sorry if I sound dumb right now :(
nice little product
yer im super impressed with them to be honest mate , hope yout doing ok buddy
Well I bought a couple of these switches, no idea how to wire it up. I can wire it up so the lights are Permanently on, and get the led to light up can't get it to switch off or dim. Any help appreciated.
Have you got all the pos and neg wires correctly wired . The wire with the text on it is the pos and the one with the white broken line is the neg from what I remember . That’s what I remember but on the cables it should have a silver tab telling you what’s what mate
Thanks yeah, that's what I figured, there's 2 sets of wires, did splice both negatives together and the positives together or did you only have to wire up one set?
@R.C. Collins need help with this too!!!
Subbed. What a wicked channel.
Welcome aboard! and thank you guys
Hi Neil ya legend. How did you wire it? i see they have 4 wires. would you send three to the ground and one live? Cheers mate!
Basically pos and neg to the live an neg then the other pos and neg to your led .
😁 ey up Neil, top job bud the lights look smart mate, hope your all well 😊👍
Cheers buddy . Yer I’m well impressed with those switches mate . Hope your good buddy
@@UrbanVanlife not too bad mate, thanks , nowt that 6 winning numbers wouldn't sort out 😁😊👍
Nice, like it a lot.
There really good appart from the light . Wish u could turn it off
Great video and I have just bought one from the website. But how the f**k do you wire it?
Heat shrunk solder wrap?!!! What is this wizardry and why havent I heard of this before ?!!!
Mate I only found out about it last year abs I was like . Why have I not known about this lol
Flash kit ( no pun intended)
hahahah lets hope they dont flash lol but there a litttle fancy
Four wires on the switch but you only used two ?
Yes 2 go to the light and 2 go to the 12v posative and negative . This was totally explained in the video buddy
Looks like the TH-cam police deleted my comment that the switches are available for £6.99 UK supplier on a certain auction website, it’s a pity they don’t delete troll comments as quickly.
its not even in the held section mate , but if you notice i re did the thumbnail and added your ebay find on it mate , so nice one bud id rather people get the cheapest they can , thanks again Andrew
@@UrbanVanlife Cheers mate. One question blue or red?
No one likes baggy holes Neil
😂😂😂✅✅
Just to say, I sell led lighting for a living. Not every led strip is Dimmable. Yours is working fine, but unless u previously checked its a stroke of luck that they dimmed. A non-dimmable strip will flicker continuesly when dimmed. It will also dramatically reduce the life of your LED.
Not to critise mate as I love your tutorials.
Innuendo bingo... 🤣🤣 holes and things... Come back Emma, you were certainly missing from this video. Im sure you would be able to read the name right 😏
hahhahhahah i agree , totaly agree , shes been missing for to long ,
@P K Blinder the truth is he actually locked me in the cupboard and snuck out to film this because he knew I would do a better job than him!!! 💅🏻💅🏻💅🏻
I’m not bloody Joseph fritzell
Look what you started here PK 😂😂😂
good vid
thanks my man , hope your well
It’s ok but a bit faffy for me.
ohhhhhh i love a bit of faf me , lol