This video is one the main reason, why I love TH-cam so much. You have done an enormous good job with this video. Without your video, there’s no chance for me to reassemble my machine again.Thank you so much 🙏
This video is just to show what can be done. The two seals 06:41 and the valve 11:40 are important and should be replaced after a long period of intensive use.
Thanks, I've just a little improved my old machine (bought already used) for about 13 EUR. It's a little pity the pump assembly/disassembly was shown very briefly.
At 6:48 you twist and turn that part (I don't know what its called). I have the EC685.R model and I cannot twist and turn. How do I get it lose? I see that your model is the EC685.M, is there a difference? I thought the letter might be the color (mine is red).
Unfortunately, I can't say. I only had one model available. But I think that these parts are the same in all model variants. Did you screw on the valve 5:05 und 6:05? I think the two screws hold the part in place.
i`m unable to unscrew the filter at 5:49. No mater how hard i pressed on it... And the screw it's almost striped, I also tried heating it....same result. My problem lies with the valve behind that filter, the spring weakened and now it seeps water, before it being ready to start making espresso. What might help? Maybe some wd-40? It was never opened and cleaned. It's a De'ionghi Eco 311R.
Hello. Thank you for the video. Where did you buy replacement pieces? Was it brand specific web site or somewhere else? My machine works intermittently. When it doesn’t work, it still makes a good bit of noise as if it might produce the results. Does that lead to any particular idea about what might be the problem?
Hi, that's difficult to tell if the water pump, pressure relief valve or something else is broken. I definitely recommend replacing the overpressure valve at 11:45.
Is the portafilter too full or coffee packed too tightly? I overfilled mine and it made a loud noise. It's OK now. I found the double basket can take no more than 12grams
@nklds8910 aah man that's annoying. Can I ask, I have just started using my dedica again after a few months and have gone down the coffee rabbit hole.. Is it worth getting the bottomless basket/portafilter?
Hello, are you using the dedica for day to day coffe? How's the new steam wand attachment working? Been thinking about installing one in mine too. Cheers mate.
Hi, no I don't use the steam wand anymore because it's too weak. I bought another one made of stainless steel, a little more expensive but works perfectly amzn.to/3yMrcMT
Moja Dedica od pewnego czasu wywala uszczelkę w trakcie parzenia. Początkowo myślałem, że ma to związek z ilością kawy (dla dwóch espresso dawałem 24g drobno zmielonej kawy). Okazalo sie jednak, że problem pozostaje przy 12g. Zmieniłem grubość mielenia ale nawet przy ustawieniu jak do kawy filtrowanej system się rozszczelnia. Czy ma Pan jakąś hipotezę w sprawie przyczyny problemu?
@@yt.myworks niestety sprawdzałem. nawet na wszelki wypadek zrobiłem osobne odkamienienie sitka. niemniej trop może być dobry. zaczynam podejrzewać starzejący się młynek i to że podaje mieszankę pyłu i grubo zmielonych ziaren. dzięki
@@otffinJ kup zmieloną kawę i sprawdź. Myślę jednak że uszczelka też będzie do wymiany. W moim ekspresie jest tak że woda nie leci wcale jeżeli jest za drobno zmielona kawa.
Hello, in case you're interested, i have spare parts for quite a few espresso machinea.. i have a lot of phillips, and the Saeco of course. Solis, breville, diletta, rocket, Miele, delonghi etc. also manuals .let me lnow if interested. I just started selling on ebay under Alexander Buzz Co. I haven't had a chance to load even 1% of my stock on there yet. Just ask if you need something. I typically sell for 50,% of going rate
آلة القهوة عندي ديلونجي ديدكا تطلع صوت قوي جداً اثناء استخلاص القهوة قالوا ممكن المشكلة بسبب وجود هواء داخل الآلة .. دخلت هذا المقطع و مرة مررررة من الفيديو 👍🏻👍🏻👍🏻.. فكيت الآلة بكل أمان من فوق .. كل شيء سليم لكن فيه صوت بالآلة ماراح أبداً 😢
Hi Sir, you made a great video. I have a question and I hope you can give me some advises. I did the cleaning of coffee delivery outlet same as this video: th-cam.com/video/CxFUmcXYIOY/w-d-xo.htmlsi=HFn1IO1_8LIcyQtO However when I brew the coffee it leaked from the side and seems it was full of pressured. Did I fixed the screw too tight or not tight enough so that the coffee leaking out? Thank you!
Hello, it could be that the gasket under the stainless steel strainer is already worn out. You may want to try replacing it - that might help. Here's a link: amzn.to/3SWYHTF
Thanks a lot for your video, very very precise, it helped me a lot! For the ones who can understand French, this one can be useful :th-cam.com/video/afCjd7wFXm4/w-d-xo.htmlsi=KpDOQ-DDN-KBNgV1
This video is one the main reason, why I love TH-cam so much. You have done an enormous good job with this video. Without your video, there’s no chance for me to reassemble my machine again.Thank you so much 🙏
Thank you so much for this amazing video! Now, my machine feels like new😮😮😮
most complete video on how to deconstruct the dedica. Super helpful, thanks a lot!
Отличная работа! Наглядно и подробно!
Thank you so much. I needed this video
I did similar stuff to ours today, just descaling cleans the machine. There is more to it, as you can see.
Btw the Stainless Steel Filter, I cleaned it with a steam cleaner...wow. Yeah happy I did that.
Thanks for sharing. May I know this intensive servicing is for after how long of usage?
This video is just to show what can be done. The two seals 06:41 and the valve 11:40 are important and should be replaced after a long period of intensive use.
Great video. Thanks
I use a similar wand but in plastic (from Aliexpress) and it works a lot better than the original.
What is the cleaning solution used? Thanks for the great video!
Hello, I used Cafiza for cleaning purposes. However, caution is advised with aluminum parts as they can quickly lose their shine amzn.to/3weUgMc
👍👍👍 Merci
Thanks, I've just a little improved my old machine (bought already used) for about 13 EUR.
It's a little pity the pump assembly/disassembly was shown very briefly.
At 6:48 you twist and turn that part (I don't know what its called). I have the EC685.R model and I cannot twist and turn. How do I get it lose? I see that your model is the EC685.M, is there a difference? I thought the letter might be the color (mine is red).
Unfortunately, I can't say. I only had one model available. But I think that these parts are the same in all model variants. Did you screw on the valve 5:05 und 6:05? I think the two screws hold the part in place.
@@yt.myworkshm that might be it. Thank you! Super helpful video
That is a wonderful refurbishment, It looks great. How much did the refurb cost vs a new machine?
i`m unable to unscrew the filter at 5:49. No mater how hard i pressed on it... And the screw it's almost striped, I also tried heating it....same result. My problem lies with the valve behind that filter, the spring weakened and now it seeps water, before it being ready to start making espresso. What might help? Maybe some wd-40? It was never opened and cleaned. It's a De'ionghi Eco 311R.
It has to be completely cool for it to be removed. Any heat will cause enough expansion to prevent the screw and the boiler head from coming off.
Hello. Thank you for the video. Where did you buy replacement pieces? Was it brand specific web site or somewhere else?
My machine works intermittently. When it doesn’t work, it still makes a good bit of noise as if it might produce the results. Does that lead to any particular idea about what might be the problem?
Hi, that's difficult to tell if the water pump, pressure relief valve or something else is broken. I definitely recommend replacing the overpressure valve at 11:45.
@@yt.myworks Is there a methode to test it and how to know if it need to be replaced? Thanks in advance!
Yes, if air bubbles form in the water tank while making coffee, then this is an indication that the valve should be replaced.
@@yt.myworks Thank you, I will check for bubbles
Hey, when i make coffee i hear a loud buzzing noise. Do you have any idea about the cause of that noise?
Hi, I can't say explicitly with a remote diagnosis, perhaps descaling the machine will help.
@@yt.myworks it didn't help with descaling
Is the portafilter too full or coffee packed too tightly? I overfilled mine and it made a loud noise. It's OK now. I found the double basket can take no more than 12grams
@alexthomson7465 it also makes that sound without the portafilter in. I dont have the stock portafilter anyway
@nklds8910 aah man that's annoying. Can I ask, I have just started using my dedica again after a few months and have gone down the coffee rabbit hole.. Is it worth getting the bottomless basket/portafilter?
🔥👏👏👏👏
excellent
Hello, are you using the dedica for day to day coffe? How's the new steam wand attachment working? Been thinking about installing one in mine too. Cheers mate.
Hi, no I don't use the steam wand anymore because it's too weak. I bought another one made of stainless steel, a little more expensive but works perfectly amzn.to/3yMrcMT
Important, pay attention to the number of your device, there are different versions of the steam wand.
@@yt.myworks thanks, in that case i will have to decide between rancilio silva wand and that one. Cheers
@@DarkVeaerxD The new Dedica EC885.GY has a steam wand included or the Maestro Plus EC950. M as well.
were the various fluids and brush on items a secret or are you going to tell us?
You can find most of it in the video description below. If you need anything else, please let me know.
Moja Dedica od pewnego czasu wywala uszczelkę w trakcie parzenia. Początkowo myślałem, że ma to związek z ilością kawy (dla dwóch espresso dawałem 24g drobno zmielonej kawy). Okazalo sie jednak, że problem pozostaje przy 12g. Zmieniłem grubość mielenia ale nawet przy ustawieniu jak do kawy filtrowanej system się rozszczelnia. Czy ma Pan jakąś hipotezę w sprawie przyczyny problemu?
Sprawdzałeś czy sitko jest drożne? Może być że zatkane jest poprzez bardzo drobno zmieloną kawę.
@@yt.myworks niestety sprawdzałem. nawet na wszelki wypadek zrobiłem osobne odkamienienie sitka. niemniej trop może być dobry. zaczynam podejrzewać starzejący się młynek i to że podaje mieszankę pyłu i grubo zmielonych ziaren. dzięki
@@otffinJ kup zmieloną kawę i sprawdź. Myślę jednak że uszczelka też będzie do wymiany. W moim ekspresie jest tak że woda nie leci wcale jeżeli jest za drobno zmielona kawa.
@@yt.myworks uszczelkę zmieniłem. Jutro dostaję nowy młynek żarnowy. Doniosę czy rozwiązał problem.
A little bit concerned that the hot water goes through to much plastic and aluminum
This is a very stable plastic and I think it does not react with water. I didn't find any aluminum on the device.
@@yt.myworks the thermoblock is made of aluminum, but maybe inside the pipes are made of stainless steel or brass
@@FranK-ji5gmthe heatblock is aluminum but the part touching the water is stainless steel
Hello, in case you're interested, i have spare parts for quite a few espresso machinea.. i have a lot of phillips, and the Saeco of course. Solis, breville, diletta, rocket, Miele, delonghi etc. also manuals .let me lnow if interested. I just started selling on ebay under Alexander Buzz Co. I haven't had a chance to load even 1% of my stock on there yet. Just ask if you need something. I typically sell for 50,% of going rate
آلة القهوة عندي ديلونجي ديدكا تطلع صوت قوي جداً اثناء استخلاص القهوة قالوا ممكن المشكلة بسبب وجود هواء داخل الآلة .. دخلت هذا المقطع و مرة مررررة من الفيديو 👍🏻👍🏻👍🏻..
فكيت الآلة بكل أمان من فوق ..
كل شيء سليم
لكن فيه صوت بالآلة ماراح أبداً 😢
من مسافة بعيدة ، للأسف ، لا أستطيع أن أقول 100٪ ما يمكن كسره. إنه مجرد تخمين. ربما مضخة المياه معيبة ؟! ولكن كما ذكرنا من قبل ، هذه مجرد تخميناتي
صوتها فعلا مرتفع، هل سبق وأن استمعت لصوت آلة مشابهة لآلتك حتى تتأكد من أن الأمر طبيعي أو لا؟؟
6я мин.😮 просто чаще надо снимать это сито и промывать..😂
I have already bought the machine in this condition 🤷
Hi Sir, you made a great video. I have a question and I hope you can give me some advises. I did the cleaning of coffee delivery outlet same as this video: th-cam.com/video/CxFUmcXYIOY/w-d-xo.htmlsi=HFn1IO1_8LIcyQtO
However when I brew the coffee it leaked from the side and seems it was full of pressured. Did I fixed the screw too tight or not tight enough so that the coffee leaking out? Thank you!
Hello, it could be that the gasket under the stainless steel strainer is already worn out. You may want to try replacing it - that might help. Here's a link: amzn.to/3SWYHTF
@@yt.myworks It has been solved after tightening the screw. Thanks for your advice!
Have you just destroyed your countertop - not using a pad when cutting out the sticker? Oops
No, of course I used a wooden board as a base ;-)
Just buy a new one
Thanks a lot for your video, very very precise, it helped me a lot! For the ones who can understand French, this one can be useful :th-cam.com/video/afCjd7wFXm4/w-d-xo.htmlsi=KpDOQ-DDN-KBNgV1